Cmdline checking

moved to doc/commandline-checking.txt for the time being

aciacore.c as included from c64/cart/c64acia1.c:
aciacore.c as included from cbm2/cbm2acia1.c:
aciacore.c as included from pet/petacia1.c:
aciacore.c as included from plus4/plus4acia.c:
------------------------------------------------
command line:	-myaciadev <0-3>
description:	"Specify RS232 device this ACIA should work on"
resource:		"Acia1Dev"
action:		N/A

arch/amigaos/joy.c:
-------------------
command line:	-joydev1 <number>
description:	"Joystick #1 emulation: (0: None, 1: Numpad, 2: Keyset A/AI, 3: Keyset B/AI)"
resource:		"JoyDevice1"
action:		N/A

arch/amigaos/joy.c:
-------------------
command line:	-joydev2 <number>
description:	"Joystick #2 emulation: (0: None, 1: Numpad, 2: Keyset A/AI, 3: Keyset B/AI)"
resource:		"JoyDevice2"
action:		N/A

arch/amigaos/joy.c:
-------------------
command line:	-extrajoydev1 <number>
description:	"Extra joystick #1 emulation: (0: None, 1: Numpad, 2: Keyset A/AI, 3: Keyset B/AI)"
resource:		"JoyDevice3"
action:		N/A

arch/amigaos/joy.c:
-------------------
command line:	-extrajoydev2 <number>
description:	"Extra joystick #2 emulation: (0: None, 1: Numpad, 2: Keyset A/AI, 3: Keyset B/AI)"
resource:		"JoyDevice4"
action:		N/A

arch/amigaos/joyll.c:
---------------------
command line:	-joydev1 <number>
description:	"Joystick #1 emulation: (0: None, 1: Numpad, 2-5: Amiga Joy 0-3)"
resource:		"JoyDevice1"
action:		N/A

arch/amigaos/joyll.c:
---------------------
command line:	-joydev2 <number>
description:	"Joystick #2 emulation: (0: None, 1: Numpad, 2-5: Amiga Joy 0-3)"
resource:		"JoyDevice2"
action:		N/A

arch/amigaos/joyll.c:
---------------------
command line:	-extrajoydev1 <number>
description:	"Extra joystick #1 emulation: (0: None, 1: Numpad, 2-5: Amiga Joy 0-3)"
resource:		"JoyDevice3"
action:		N/A

arch/amigaos/joyll.c:
---------------------
command line:	-extrajoydev2 <number>
description:	"Extra joystick #2 emulation: (0: None, 1: Numpad, 2-5: Amiga Joy 0-3)"
resource:		"JoyDevice4"
action:		N/A

arch/amigaos/uiapi.c:
---------------------
command line:	-saveres
description:	"Save settings on exit"
resource:		"SaveResourcesOnExit" (set to 1)
action:		N/A

arch/amigaos/uiapi.c:
---------------------
command line:	+saveres
description:	"Never save settings on exit"
resource:		"SaveResourcesOnExit" (set to 0)
action:		N/A

arch/amigaos/uiapi.c:
---------------------
command line:	-confirmexit
description:	"Confirm quiting VICE"
resource:		"ConfirmOnExit" (set to 1)
action:		N/A

arch/amigaos/uiapi.c:
---------------------
command line:	+confirmexit
description:	"Never confirm quiting VICE"
resource:		"ConfirmOnExit" (set to 0)
action:		N/A

arch/beos/joy.cc:
-----------------
command line:	-joydev1 <number>
description:	"Set input device for joystick #1" (fixme: needs better description)
resource:		"JoyDevice1"
action:		N/A

arch/beos/joy.cc:
-----------------
command line:	-joydev2 <number>
description:	"Set input device for joystick #2" (fixme: needs better description)
resource:		"JoyDevice2"
action:		N/A

arch/beos/joy.cc:
-----------------
command line:	-extrajoydev1 <number>
description:	"Set input device for extra joystick #1" (fixme: needs better description)
resource:		"JoyDevice3"
action:		N/A

arch/beos/joy.cc:
-----------------
command line:	-extrajoydev2 <number>
description:	"Set input device for extra joystick #" (fixme: needs better description)
resource:		"JoyDevice4"
action:		N/A

arch/beos/kbd.c:
----------------
command line:	-keymap <number>
description:	"Specify index of used keymap" (fixme: needs better description)
resource:		"KeymapIndex"
action:		N/A

arch/beos/video.cc:
-------------------
command line:	-directwindow
description:	"Enable BeOS DirectWindow API"
resource:		"DirectWindow" (set to 1)
action:		N/A

arch/beos/video.cc:
-------------------
command line:	+directwindow
description:	"Disable BeOS DirectWindow API"
resource:		"DirectWindow" (set to 0)
action:		N/A

arch/msdos/joy.c:
-----------------
command line:	-joydev1 <number>
description:	"Set input device for joystick #1" (fixme: needs better description)
resource:		"JoyDevice1"
action:		N/A

arch/msdos/joy.c:
-----------------
command line:	-joydev2 <number>
description:	"Set input device for joystick #2" (fixme: needs better description)
resource:		"JoyDevice2"
action:		N/A

arch/msdos/joy.c:
-----------------
command line:	-extrajoydev1 <number>
description:	"Set input device for extra joystick #1" (fixme: needs better description)
resource:		"JoyDevice3"
action:		N/A

arch/msdos/joy.c:
-----------------
command line:	-extrajoydev2 <number>
description:	"Set input device for extra joystick #2" (fixme: needs better description)
resource:		"JoyDevice4"
action:		N/A

arch/msdos/ui.c:
----------------
command line:	-leds
description:	"Enable usage of PC keyboard LEDs"
resource:		"UseLeds" (set to 1)
action:		N/A

arch/msdos/ui.c:
----------------
command line:	+leds
description:	"Disable usage of PC keyboard LEDs"
resource:		"UseLeds" (set to 0)
action:		N/A

arch/msdos/ui.c:
----------------
command line:	+statusbar
description:	"Disable the Statusbar"
resource:		"ShowStatusbar" (set to 0)
action:		N/A

arch/msdos/ui.c:
----------------
command line:	-statusbar
description:	"Enable the Statusbar"
resource:		"ShowStatusbar" (set to 1)
action:		N/A

arch/msdos/video.c:
-------------------
command line:	-vgamode <mode>
description:	"Set VGA mode to <mode>. (0:320x200x8, 1:360x240x8, 2:360x270x8, 3:376x282x8, 4:400x300x8, 5:640x480x8, 6:800x600x8, 7:1024x768x8, 8:320x200x16, 9:400x300x16, 10:640x480x16, 11:800x600x16, 12:1024x768x16, 13:640x480x32, 14:800x600x32, 15:1024x768x32)"
resource:		"VGAMode"
action:		N/A

arch/msdos/video.c:
-------------------
command line:	-triplebuf
description:	"Try to use triple buffering when possible"
resource:		"TripleBuffering" (set to 1)
action:		N/A

arch/msdos/video.c:
-------------------
command line:	+triplebuf
description:	"Disable usage of triple buffering"
resource:		"TripleBuffering" (set to 0)
action:		N/A

arch/msdos/vsync.c:
-------------------
command line:	-speed <percent>
description:	"Limit emulation speed to specified value"
resource:		"Speed"
action:		N/A

arch/msdos/vsync.c:
-------------------
command line:	-refresh <value>
description:	"Update every <value> frames (`0' for automatic)"
resource:		"RefreshRate"
action:		N/A

arch/msdos/vsync.c:
-------------------
command line:	-warp
description:	"Enable warp mode"
resource:		"WarpMode" (set to 1)
action:		N/A

arch/msdos/vsync.c:
-------------------
command line:	+warp
description:	"Disable warp mode"
resource:		"WarpMode" (set to 0)
action:		N/A

arch/os2/joy.c:
---------------
command line:	-joy1cal
description:	"Start auto calibration for PC joystick #1"
resource:		N/A
action:		set_joyA_autoCal()

arch/os2/joy.c:
---------------
command line:	-joy2cal
description:	"Start auto calibration for PC joystick #2"
resource:		N/A
action:		set_joyB_autoCal()

arch/os2/joy.c:
---------------
command line:	-joydev1 <number>
description:	"Set input device for CBM joystick port #1" (fixme: needs better description)
resource:		"JoyDevice1"
action:		N/A

arch/os2/joy.c:
---------------
command line:	-joydev2 <number>
description:	"Set input device for CBM joystick port #2" (fixme: needs better description)
resource:		"JoyDevice2"
action:		N/A

arch/os2/joy.c:
---------------
command line:	-extrajoydev1 <number>
description:	"Set input device for extra CBM joystick port #1" (fixme: needs better description)
resource:		"JoyDevice3"
action:		N/A

arch/os2/joy.c:
---------------
command line:	-extrajoydev2 <number>
description:	"Set input device for extra CBM joystick port #2" (fixme: needs better description)
resource:		"JoyDevice4"
action:		N/A

arch/os2/kbd/kmap-pet.c:
------------------------
command line:	-grsymkeymap <name>
description:	"Specify the name of the graphics keyboard symbolic keymap file"
resource:		"KeymapGraphicsSymFile"
action:		N/A

arch/os2/kbd/kmap-pet.c:
------------------------
command line:	-grposkeymap <name>
description:	"Specify the name of the graphics keyboard positional keymap file"
resource:		"KeymapGraphicsPosFile"
action:		N/A

arch/os2/kbd/kmap-pet.c:
------------------------
command line:	-buksymkeymap <name>
description:	"Specify the name of the UK business keyboard symbolic keymap file"
resource:		"KeymapBusinessUKSymFile"
action:		N/A

arch/os2/kbd/kmap-pet.c:
------------------------
command line:	-bukposkeymap <name>
description:	"Specify the name of the UK business keyboard positional keymap file"
resource:		"KeymapBusinessUKPosFile"
action:		N/A

arch/os2/kbd/kmap-pet.c:
------------------------
command line:	-bdesymkeymap <name>
description:	"Specify the name of the German business keyboard symbolic keymap file"
resource:		"KeymapBusinessDESymFile"
action:		N/A

arch/os2/kbd/kmap-pet.c:
------------------------
command line:	-bdeposkeymap <name>
description:	"Specify the name of the German business keyboard positional keymap file"
resource:		"KeymapBusinessDEPosFile"
action:		N/A

arch/os2/kbd/kmap.c:
--------------------
command line:	-symkeymap <name>
description:	"Specify the name of the symbolic keymap file"
resource:		"KeymapSymFile"
action:		N/A

arch/os2/kbd/kmap.c:
--------------------
command line:	-poskeymap <name>
description:	"Specify the name of the positional keymap file"
resource:		"KeymapPosFile"
action:		N/A

arch/os2/mousedrv.c:
--------------------
command line:	-hidemouseptr
description:	"Enable hiding of mouse pointer inside the window"
resource:		"HideMousePtr" (set to 1)
action:		N/A

arch/os2/mousedrv.c:
--------------------
command line:	+hidemouseptr
description:	"Disable hiding of mouse pointer inside the window"
resource:		"HideMousePtr" (set to 0)
action:		N/A

arch/os2/ui.c:
--------------
command line:	-leds
description:	"Enable usage of PC keyboard LEDs"
resource:		"UseLeds" (set to 1)
action:		N/A

arch/os2/ui.c:
--------------
command line:	+leds
description:	"Disable usage of PC keyboard LEDs"
resource:		"UseLeds" (set to 0)
action:		N/A

arch/os2/video.c:
-----------------
command line:	-stretch <number>
description:	"Specify stretch factor for PM Windows (1,2,3,...)"
resource:		"WindowStretchFactor"
action:		N/A

arch/os2/video.c:
-----------------
command line:	-border <number>
description:	"Specify window border type (0=no border, 1=small, 2=dialog)"
resource:		"PMBorderType"
action:		N/A

arch/os2/video.c:
-----------------
command line:	-menu
description:	"Enable Main Menu Bar"
resource:		"Menubar" (set to 1)
action:		N/A

arch/os2/video.c:
-----------------
command line:	+menu
description:	"Disable Main Menu Bar"
resource:		"Menubar" (set to 0)
action:		N/A

arch/sdl/joy.c:
---------------
command line:	-joymap <name>
description:	"Specify name of joystick map file"
resource:		"JoyMapFile"
action:		N/A

arch/sdl/joy.c:
---------------
command line:	-joythreshold <0-32767>
description:	"Set joystick threshold"
resource:		"JoyThreshold"
action:		N/A

arch/sdl/joy.c:
---------------
command line:	-joyfuzz <0-32767>
description:	"Set joystick fuzz"
resource:		"JoyFuzz"
action:		N/A

arch/sdl/joy.c:
---------------
command line:	-joydev1 <0-4> / <0-3>
description:	"Set device for joystick port 1"
resource:		"JoyDevice1"
action:		N/A

arch/sdl/joy.c:
---------------
command line:	-joydev2 <0-4> / <0-3>
description:	"Set device for joystick port 2"
resource:		"JoyDevice2"
action:		N/A

arch/sdl/joy.c:
---------------
command line:	-extrajoydev1 <0-4> / <0-3>
description:	"Set device for extra joystick port 1"
resource:		"JoyDevice3"
action:		N/A

arch/sdl/joy.c:
---------------
command line:	-extrajoydev2 <0-4> / <0-3>
description:	"Set device for extra joystick port 2"
resource:		"JoyDevice4"
action:		N/A

arch/sdl/ui.c:
--------------
command line:	-menukey <key>
description:	"Keycode of the menu activate key"
resource:		"MenuKey"
action:		N/A

arch/sdl/ui.c:
--------------
command line:	-menukeyup <key>
description:	"Keycode of the menu up key"
resource:		"MenuKeyUp"
action:		N/A

arch/sdl/ui.c:
--------------
command line:	-menukeydown <key>
description:	"Keycode of the menu down key"
resource:		"MenuKeyDown"
action:		N/A

arch/sdl/ui.c:
--------------
command line:	-menukeyleft <key>
description:	"Keycode of the menu left key"
resource:		"MenuKeyLeft"
action:		N/A

arch/sdl/ui.c:
--------------
command line:	-menukeyright <key>
description:	"Keycode of the menu right key"
resource:		"MenuKeyRight"
action:		N/A

arch/sdl/ui.c:
--------------
command line:	-menukeyselect <key>
description:	"Keycode of the menu select key"
resource:		"MenuKeySelect"
action:		N/A

arch/sdl/ui.c:
--------------
command line:	-menukeycancel <key>
description:	"Keycode of the menu cancel key"
resource:		"MenuKeyCancel"
action:		N/A

arch/sdl/ui.c:
--------------
command line:	-menukeyexit <key>
description:	"Keycode of the menu exit key"
resource:		"MenuKeyExit"
action:		N/A

arch/sdl/ui.c:
--------------
command line:	-menukeymap <key>
description:	"Keycode of the menu map key"
resource:		"MenuKeyMap"
action:		N/A

arch/sdl/ui.c:
--------------
command line:	-saveresourcesonexit
description:	"Enable saving of the resources on exit"
resource:		"SaveResourcesOnExit" (set to 1)
action:		N/A

arch/sdl/ui.c:
--------------
command line:	+saveresourcesonexit
description:	"Disable saving of the resources on exit"
resource:		"SaveResourcesOnExit" (set to 0)
action:		N/A

arch/sdl/ui.c:
--------------
command line:	-confirmonexit
description:	"Enable confirm on exit"
resource:		"ConfirmOnExit" (set to 1)
action:		N/A

arch/sdl/ui.c:
--------------
command line:	+confirmonexit
description:	"Disable confirm on exit"
resource:		"ConfirmOnExit" (set to 0)
action:		N/A

arch/sdl/ui.c:
--------------
command line:	-statusbar
description:	"Enable statusbar"
resource:		"SDLStatusbar" (set to 1)
action:		N/A

arch/sdl/ui.c:
--------------
command line:	+statusbar
description:	"Disable statusbar"
resource:		"SDLStatusbar" (set to 0)
action:		N/A

arch/sdl/video.c:
-----------------
command line:	-sdlbitdepth <bpp>
description:	"Set bitdepth (0 = current, 8, 15, 16, 24, 32)"
resource:		"SDLBitdepth"
action:		N/A

arch/sdl/video.c:
-----------------
command line:	-sdllimitmode <mode>
description:	"Set resolution limiting mode (0 = off, 1 = max, 2 = fixed)"
resource:		"SDLLimitMode"
action:		N/A

arch/sdl/video.c:
-----------------
command line:	-sdlcustomw <width>
description:	"Set custom resolution width"
resource:		"SDLCustomWidth"
action:		N/A

arch/sdl/video.c:
-----------------
command line:	-sdlcustomh <height>
description:	"Set custom resolution height"
resource:		"SDLCustomHeight"
action:		N/A

arch/sdl/video.c:
-----------------
command line:	-sdlaspectmode <mode>
description:	"Set aspect ratio mode (0 = off, 1 = custom, 2 = true)"
resource:		"SDLGLAspectMode"
action:		N/A

arch/sdl/video.c:
-----------------
command line:	-aspect <aspect ratio>
description:	"Set custom aspect ratio (0.5 - 2.0)"
resource:		"AspectRatio"
action:		N/A

arch/sdl/video.c:
-----------------
command line:	-sdlflipx
description:	"Enable X flip"
resource:		"SDLGLFlipX" (set to 1)
action:		N/A

arch/sdl/video.c:
-----------------
command line:	+sdlflipx
description:	"Disable X flip"
resource:		"SDLGLFlipX" (set to 0)
action:		N/A

arch/sdl/video.c:
-----------------
command line:	-sdlflipy
description:	"Enable Y flip"
resource:		"SDLGLFlipY" (set to 1)
action:		N/A

arch/sdl/video.c:
-----------------
command line:	+sdlflipy
description:	"Disable Y flip"
resource:		"SDLGLFlipY" (set to 0)
action:		N/A

arch/unix/joy.c:
----------------
command line:	-joydev1 <0-13> / <0-11> / <0-9>
description:	"Set device for joystick port 1"
resource:		"JoyDevice1"
action:		N/A

arch/unix/joy.c:
----------------
command line:	-joydev2 <0-13> / <0-11> / <0-9>
description:	"Set device for joystick port 2"
resource:		"JoyDevice2"
action:		N/A

arch/unix/joy.c:
----------------
command line:	-extrajoydev1 <0-13> / <0-11> / <0-9>
description:	"Set device for extra joystick port 1"
resource:		"JoyDevice3"
action:		N/A

arch/unix/joy.c:
----------------
command line:	-extrajoydev2 <0-13> / <0-11> / <0-9>
description:	"Set device for extra joystick port 2"
resource:		"JoyDevice4"
action:		N/A

arch/unix/macosx/cocoa/mousedrv.m:
----------------------------------
command line:	-mousescalex <1-8>
description:	"Set scaling factor for mouse movement along X"
resource:		"MouseScaleX"
action:		N/A

arch/unix/macosx/cocoa/mousedrv.m:
----------------------------------
command line:	-mousescaley <1-8>
description:	"Set scaling factor for mouse movement along Y"
resource:		"MouseScaleY"
action:		N/A

arch/unix/macosx/cocoa/ui-cmdline-options.c:
--------------------------------------------
command line:	-saveres
description:	"Save settings on exit"
resource:		"SaveResourcesOnExit" (set to 1)
action:		N/A

arch/unix/macosx/cocoa/ui-cmdline-options.c:
--------------------------------------------
command line:	+saveres
description:	"Never save settings on exit"
resource:		"SaveResourcesOnExit" (set to 0)
action:		N/A

arch/unix/macosx/cocoa/ui-cmdline-options.c:
--------------------------------------------
command line:	+confirmexit
description:	"Never confirm quitting VICE"
resource:		"ConfirmOnExit" (set to 0)
action:		N/A

arch/unix/macosx/cocoa/ui-cmdline-options.c:
--------------------------------------------
command line:	-confirmexit
description:	"Confirm quitting VICE"
resource:		"ConfirmOnExit" (set to 1)
action:		N/A

arch/unix/macosx/cocoa/video.m:
-------------------------------
command line:	-syncdrawmode <0-2>
description:	"Enable draw synchronization to vertical blank" (fixme: needs better description)
resource:		"SyncDrawMode"
action:		N/A

arch/unix/macosx/cocoa/video.m:
-------------------------------
command line:	-syncdrawbuffers <0-8>
description:	"Set number of buffers used for sync draw (0=use default)"
resource:		"SyncDrawBuffers"
action:		N/A

arch/unix/macosx/cocoa/video.m:
-------------------------------
command line:	-syncdrawflickerfix
description:	"Enable flicker fixing in sync draw"
resource:		"SyncDrawFlickerFix" (set to 1)
action:		N/A

arch/unix/macosx/cocoa/video.m:
-------------------------------
command line:	+syncdrawflickerfix
description:	"Disable flicker fixing in sync draw"
resource:		"SyncDrawFlickerFix" (set to 0)
action:		N/A

arch/unix/macosx/cocoa/video.m:
-------------------------------
command line:	-trueaspect
description:	"Enable true aspect ratio"
resource:		"TrueAspectRatio" (set to 1)
action:		N/A

arch/unix/macosx/cocoa/video.m:
-------------------------------
command line:	+trueaspect
description:	"Disable true aspect ratio"
resource:		"TrueAspectRatio" (set to 0)
action:		N/A

arch/unix/macosx/joy.c:
-----------------------
command line:	-joyAdevice <vid:pid:sn>
description:	"Set HID A device" (fixme: needs better description)
resource:		"JoyADevice"
action:		N/A

arch/unix/macosx/joy.c:
-----------------------
command line:	-joyAxaxis <X,Y,Z,Rx,Ry,Rz>
description:	"Set X Axis for HID A device" (fixme: needs better description)
resource:		"JoyAXAxis"
action:		N/A

arch/unix/macosx/joy.c:
-----------------------
command line:	-joyAyaxis <X,Y,Z,Rx,Ry,Rz>
description:	"Set Y Axis for HID A device" (fixme: needs better description)
resource:		"JoyAYAxis"
action:		N/A

arch/unix/macosx/joy.c:
-----------------------
command line:	-joyAbuttons <f:af:l:r:u:d>
description:	"Set Buttons for HID A device" (fixme: needs better description)
resource:		"JoyAButtons"
action:		N/A

arch/unix/macosx/joy.c:
-----------------------
command line:	-joyAautobuttons <af1:af2:af1p:af1r:af2p:af2r>
description:	"Set Auto Fire Buttons for HID A device" (fixme: needs better description)
resource:		"JoyAAutoButtons"
action:		N/A

arch/unix/macosx/joy.c:
-----------------------
command line:	-joyAxthreshold <0-100>
description:	"Set X Axis Threshold in Percent of HID A device"
resource:		"JoyAXThreshold"
action:		N/A

arch/unix/macosx/joy.c:
-----------------------
command line:	-joyAythreshold <0-100>
description:	"Set Y Axis Threshold in Percent of HID A device"
resource:		"JoyAYThreshold"
action:		N/A

arch/unix/macosx/joy.c:
-----------------------
command line:	-joyBdevice <vid:pid:sn>
description:	"Set HID B device" (fixme: needs better description)
resource:		"JoyBDevice"
action:		N/A

arch/unix/macosx/joy.c:
-----------------------
command line:	-joyBxaxis <X,Y,Z,Rx,Ry,Rz>
description:	"Set X Axis for HID B device" (fixme: needs better description)
resource:		"JoyBXAxis"
action:		N/A

arch/unix/macosx/joy.c:
-----------------------
command line:	-joyByaxis <X,Y,Z,Rx,Ry,Rz>
description:	"Set Y Axis for HID B device" (fixme: needs better description)
resource:		"JoyBYAxis"
action:		N/A

arch/unix/macosx/joy.c:
-----------------------
command line:	-joyBbuttons <f:af:l:r:u:d>
description:	"Set Buttons for HID B device" (fixme: needs better description)
resource:		"JoyBButtons"
action:		N/A

arch/unix/macosx/joy.c:
-----------------------
command line:	-joyBautobuttons <af1:af2:af1p:af1r:af2p:af2r>
description:	"Set Auto Fire Buttons for HID B device" (fixme: needs better description)
resource:		"JoyBAutoButtons"
action:		N/A

arch/unix/macosx/joy.c:
-----------------------
command line:	-joyBxthreshold <0-100>
description:	"Set X Axis Threshold in Percent of HID B device"
resource:		"JoyBXThreshold"
action:		N/A

arch/unix/macosx/joy.c:
-----------------------
command line:	-joyBythreshold <0-100>
description:	"Set Y Axis Threshold in Percent of HID B device"
resource:		"JoyBYThreshold"
action:		N/A

arch/unix/macosx/joy.c:
-----------------------
command line:	-joyAhatswitch <0-n>
description:	"Set Hat Switch for Joystick of HID A device"
resource:		"JoyAHatSwitch"
action:		N/A

arch/unix/macosx/joy.c:
-----------------------
command line:	-joyBhatswitch <0-n>
description:	"Set Hat Switch for Joystick of HID B device"
resource:		"JoyBHatSwitch"
action:		N/A

arch/unix/macosx/joy.c:
-----------------------
command line:	-joydev1 <0-5>
description:	"Set device for joystick port 1"
resource:		"JoyDevice1"
action:		N/A

arch/unix/macosx/joy.c:
-----------------------
command line:	-joydev2 <0-5>
description:	"Set device for joystick port 2"
resource:		"JoyDevice2"
action:		N/A

arch/unix/macosx/joy.c:
-----------------------
command line:	-extrajoydev1 <0-5>
description:	"Set device for extra joystick port 1"
resource:		"JoyDevice3"
action:		N/A

arch/unix/macosx/joy.c:
-----------------------
command line:	-extrajoydev2 <0-5>
description:	"Set device for extra joystick port 2"
resource:		"JoyDevice4"
action:		N/A

arch/unix/macosx/mididrv.c:
---------------------------
command line:	-midiname <Name>
description:	"Name of MIDI Client"
resource:		"MIDIName"
action:		N/A

arch/unix/macosx/mididrv.c:
---------------------------
command line:	-midiinname <Name>
description:	"Name of MIDI-In Port"
resource:		"MIDIInName"
action:		N/A

arch/unix/macosx/mididrv.c:
---------------------------
command line:	-midioutname <Name>
description:	"Name of MIDI-Out Port"
resource:		"MIDIOutName"
action:		N/A

arch/unix/mididrv.c:
--------------------
command line:	-midiin <Name>
description:	"Specify MIDI-In device"
resource:		"MIDIInDev"
action:		N/A

arch/unix/mididrv.c:
--------------------
command line:	-midiout <Name>
description:	"Specify MIDI-Out device"
resource:		"MIDIOutDev"
action:		N/A

arch/unix/mididrv.c:
--------------------
command line:	-mididrv <Driver>
description:	"Specify MIDI driver (0 = OSS, 1 = ALSA)"
resource:		"MIDIDriver"
action:		N/A

arch/unix/rs232.c:
------------------
command line:	-rsdev1baud <baudrate>
description:	"Specify baudrate of first RS232 device"
resource:		"RsDevice1Baud"
action:		N/A

arch/unix/rs232.c:
------------------
command line:	-rsdev2baud <baudrate>
description:	"Specify baudrate of second RS232 device"
resource:		"RsDevice2Baud"
action:		N/A

arch/unix/rs232.c:
------------------
command line:	-rsdev3baud <baudrate>
description:	"Specify baudrate of third RS232 device"
resource:		"RsDevice3Baud"
action:		N/A

arch/unix/rs232.c:
------------------
command line:	-rsdev4baud <baudrate>
description:	"Specify baudrate of fourth RS232 device"
resource:		"RsDevice4Baud"
action:		N/A

arch/unix/x11/ui-cmdline-options.c:
-----------------------------------
command line:	-htmlbrowser <Command>
description:	"Specify an HTML browser for the on-line help"
resource:		"HTMLBrowserCommand"
action:		N/A

arch/unix/x11/ui-cmdline-options.c:
-----------------------------------
command line:	-install
description:	"Install a private colormap"
resource:		"PrivateColormap" (set to 1)
action:		N/A

arch/unix/x11/ui-cmdline-options.c:
-----------------------------------
command line:	+install
description:	"Use the default colormap"
resource:		"PrivateColormap" (set to 0)
action:		N/A

arch/unix/x11/ui-cmdline-options.c:
-----------------------------------
command line:	-saveres
description:	"Save settings on exit"
resource:		"SaveResourcesOnExit" (set to 1)
action:		N/A

arch/unix/x11/ui-cmdline-options.c:
-----------------------------------
command line:	+saveres
description:	"Never save settings on exit"
resource:		"SaveResourcesOnExit" (set to 0)
action:		N/A

arch/unix/x11/ui-cmdline-options.c:
-----------------------------------
command line:	-confirmexit
description:	"Confirm quitting VICE"
resource:		"ConfirmOnExit" (set to 1)
action:		N/A

arch/unix/x11/ui-cmdline-options.c:
-----------------------------------
command line:	+confirmexit
description:	"Never confirm quitting VICE"
resource:		"ConfirmOnExit" (set to 0)
action:		N/A

arch/unix/x11/ui-cmdline-options.c:
-----------------------------------
command line:	-fullscreen
description:	"Enable fullscreen"
resource:		"UseFullscreen" (set to 1)
action:		N/A

arch/unix/x11/ui-cmdline-options.c:
-----------------------------------
command line:	+fullscreen
description:	"Disable fullscreen"
resource:		"UseFullscreen" (set to 0)
action:		N/A

arch/unix/x11/ui-cmdline-options.c:
-----------------------------------
command line:	-displaydepth <value>
description:	"Specify X display depth (1..32)"
resource:		"DisplayDepth"
action:		N/A

arch/unix/x11/xaw/x11video.c:
-----------------------------
command line:	-xsync
description:	"Call `XSync()' after updating the emulation window"
resource:		"UseXSync" (set to 1)
action:		N/A

arch/unix/x11/xaw/x11video.c:
-----------------------------
command line:	+xsync
description:	"Do not call `XSync()' after updating the emulation window"
resource:		"UseXSync" (set to 0)
action:		N/A

arch/unix/x11/xaw/x11video.c:
-----------------------------
command line:	-mitshm
description:	"Use shared memory"
resource:		"MITSHM" (set to 1)
action:		N/A

arch/unix/x11/xaw/x11video.c:
-----------------------------
command line:	+mitshm
description:	"Never use shared memory (slower)"
resource:		"MITSHM" (set to 0)
action:		N/A

arch/unix/x11/xaw/x11video.c:
-----------------------------
command line:	-fourcc <fourcc>
description:	"Request YUV FOURCC format"
resource:		"FOURCC"
action:		N/A

arch/unix/x11/xaw/x11video.c:
-----------------------------
command line:	-aspect <Aspect ratio>
description:	"Set aspect ratio (0.5 - 2.0)"
resource:		"AspectRatio"
action:		N/A

arch/unix/x11/xaw/x11video.c:
-----------------------------
command line:	-trueaspect
description:	"Enable true aspect ratio"
resource:		"TrueAspectRatio" (set to 1)
action:		N/A

arch/unix/x11/xaw/x11video.c:
-----------------------------
command line:	+trueaspect
description:	"Disable true aspect ratio"
resource:		"TrueAspectRatio" (set to 0)
action:		N/A

arch/win32/joy.c:
-----------------
command line:	-joydev1 <number>
description:	"Set input device for joystick #1" (fixme: needs better description)
resource:		"JoyDevice1"
action:		N/A

arch/win32/joy.c:
-----------------
command line:	-joydev2 <number>
description:	"Set input device for joystick #2" (fixme: needs better description)
resource:		"JoyDevice2"
action:		N/A

arch/win32/joy.c:
-----------------
command line:	-extrajoydev1 <number>
description:	"Set input device for extra joystick #1" (fixme: needs better description)
resource:		"JoyDevice3"
action:		N/A

arch/win32/joy.c:
-----------------
command line:	-extrajoydev2 <number>
description:	"Set input device for extra joystick #2" (fixme: needs better description)
resource:		"JoyDevice4"
action:		N/A

arch/win32/mididrv.c:
---------------------
command line:	-midiin <number>
description:	"Specify MIDI-In device"
resource:		"MIDIInDev"
action:		N/A

arch/win32/mididrv.c:
---------------------
command line:	-midiout <number>
description:	"Specify MIDI-Out device"
resource:		"MIDIOutDev"
action:		N/A

arch/win32/mousedrv.c:
----------------------
command line:	-mousesensitivity <sensitivity>
description:	"Sensitivity of the mouse. [40]"
resource:		"MouseSensitivity"
action:		N/A

arch/win32/ui-resources.c:
--------------------------
command line:	-saveres
description:	"Save settings on exit"
resource:		"SaveResourcesOnExit" (set to 1)
action:		N/A

arch/win32/ui-resources.c:
--------------------------
command line:	+saveres
description:	"Never save settings on exit"
resource:		"SaveResourcesOnExit" (set to 0)
action:		N/A

arch/win32/ui-resources.c:
--------------------------
command line:	-confirmexit
description:	"Confirm quitting VICE"
resource:		"ConfirmOnExit" (set to 1)
action:		N/A

arch/win32/ui-resources.c:
--------------------------
command line:	+confirmexit
description:	"Never confirm quitting VICE"
resource:		"ConfirmOnExit" (set to 0)
action:		N/A

arch/win32/ui-resources.c:
--------------------------
command line:	-singlecpu
description:	"Use only first CPU on SMP systems"
resource:		"SingleCPU" (set to 1)
action:		N/A

arch/win32/ui-resources.c:
--------------------------
command line:	+singlecpu
description:	"Use all CPUs on SMP systems"
resource:		"SingleCPU" (set to 0)
action:		N/A

arch/win32/video.c:
-------------------
command line:	-fullscreen
description:	"Start VICE in fullscreen mode"
resource:		"FullScreenEnabled" (set to 1) (fixme: no option to set to 0)
action:		N/A

arch/win32/video.c:
-------------------
command line:	-dx9disable
description:	"Disable DirectX9 video driver"
resource:		"DX9Disable" (set to 1) (fixme: no option to set to 0)
action:		N/A

attach.c:
---------
command line:	-device8 <Type>
description:	"Set device type for device #8 (0: NONE, 1: FILESYSTEM, 2: OPENCBM, 3: BLOCK DEVICE)"
resource:		"FileSystemDevice8"
action:		N/A

attach.c:
---------
command line:	-device9 <Type>
description:	"Set device type for device #9 (0: NONE, 1: FILESYSTEM, 2: OPENCBM, 3: BLOCK DEVICE)"
resource:		"FileSystemDevice9"
action:		N/A

attach.c:
---------
command line:	-device10 <Type>
description:	"Set device type for device #10 (0: NONE, 1: FILESYSTEM, 2: OPENCBM, 3: BLOCK DEVICE)"
resource:		"FileSystemDevice10"
action:		N/A

attach.c:
---------
command line:	-device11 <Type>
description:	"Set device type for device #11 (0: NONE, 1: FILESYSTEM, 2: OPENCBM, 3: BLOCK DEVICE)"
resource:		"FileSystemDevice11"
action:		N/A

attach.c:
---------
command line:	-attach8ro
description:	"Attach disk image for drive #8 read only"
resource:		"AttachDevice8Readonly" (set to 1)
action:		N/A

attach.c:
---------
command line:	-attach8rw
description:	"Attach disk image for drive #8 read write (if possible)"
resource:		"AttachDevice8Readonly" (set to 0)
action:		N/A

attach.c:
---------
command line:	-attach9ro
description:	"Attach disk image for drive #9 read only"
resource:		"AttachDevice9Readonly" (set to 1)
action:		N/A

attach.c:
---------
command line:	-attach9rw
description:	"Attach disk image for drive #9 read write (if possible)"
resource:		"AttachDevice9Readonly" (set to 0)
action:		N/A

attach.c:
---------
command line:	-attach10ro
description:	"Attach disk image for drive #10 read only"
resource:		"AttachDevice10Readonly" (set to 1)
action:		N/A

attach.c:
---------
command line:	-attach10rw
description:	"Attach disk image for drive #10 read write (if possible)"
resource:		"AttachDevice10Readonly" (set to 0)
action:		N/A

attach.c:
---------
command line:	-attach11ro
description:	"Attach disk image for drive #11 read only"
resource:		"AttachDevice11Readonly" (set to 1)
action:		N/A

attach.c:
---------
command line:	-attach11rw
description:	"Attach disk image for drive #11 read write (if possible)"
resource:		"AttachDevice11Readonly" (set to 0)
action:		N/A

autostart.c:
------------
command line:	-basicload
description:	"On autostart, load to BASIC start (without ',1')"
resource:		"AutostartBasicLoad" (set to 1)
action:		N/A

autostart.c:
------------
command line:	+basicload
description:	"On autostart, load with ',1'"
resource:		"AutostartBasicLoad" (set to 0)
action:		N/A

autostart.c:
------------
command line:	-autostartwithcolon
description:	"On autostart, use the 'RUN' command with a colon, i.e., 'RUN:'"
resource:		"AutostartRunWithColon" (set to 1)
action:		N/A

autostart.c:
------------
command line:	+autostartwithcolon
description:	"On autostart, do not use the 'RUN' command with a colon; i.e., 'RUN'"
resource:		"AutostartRunWithColon" (set to 0)
action:		N/A

autostart.c:
------------
command line:	-autostart-handle-tde
description:	"Handle True Drive Emulation on autostart"
resource:		"AutostartHandleTrueDriveEmulation" (set to 1)
action:		N/A

autostart.c:
------------
command line:	+autostart-handle-tde
description:	"Do not handle True Drive Emulation on autostart"
resource:		"AutostartHandleTrueDriveEmulation" (set to 0)
action:		N/A

autostart.c:
------------
command line:	-autostart-warp
description:	"Enable warp mode during autostart"
resource:		"AutostartWarp" (set to 1)
action:		N/A

autostart.c:
------------
command line:	+autostart-warp
description:	"Disable warp mode during autostart"
resource:		"AutostartWarp" (set to 0)
action:		N/A

autostart.c:
------------
command line:	-autostartprgmode <Mode>
description:	"Set autostart mode for PRG files (0: VirtualFS, 1: Inject, 2: Disk image)"
resource:		"AutostartPrgMode"
action:		N/A

autostart.c:
------------
command line:	-autostartprgdiskimage <Name>
description:	"Set disk image for autostart of PRG files"
resource:		"AutostartPrgDiskImage"
action:		N/A

autostart.c:
------------
command line:	-autostart-delay <Seconds>
description:	"Set initial autostart delay (0: use default)"
resource:		"AutostartDelay"
action:		N/A

autostart.c:
------------
command line:	-autostart-delay-random
description:	"Enable random initial autostart delay."
resource:		"AutostartDelayRandom" (set to 1)
action:		N/A

autostart.c:
------------
command line:	+autostart-delay-random
description:	"Disable random initial autostart delay."
resource:		"AutostartDelayRandom" (set to 0)
action:		N/A

c128/c128-cmdline-options.c:
----------------------------
command line:	-pal
description:	"Use PAL sync factor"
resource:		"MachineVideoStandard" (set to MACHINE_SYNC_PAL)
action:		N/A

c128/c128-cmdline-options.c:
----------------------------
command line:	-ntsc
description:	"Use NTSC sync factor"
resource:		"MachineVideoStandard" (set to MACHINE_SYNC_NTSC)
action:		N/A

c128/c128-cmdline-options.c:
----------------------------
command line:	-kernal <Name>
description:	"Specify name of international Kernal ROM image"
resource:		"KernalIntName"
action:		N/A

c128/c128-cmdline-options.c:
----------------------------
command line:	-kernalde <Name>
description:	"Specify name of German Kernal ROM image"
resource:		"KernalDEName"
action:		N/A

c128/c128-cmdline-options.c:
----------------------------
command line:	-kernalfi <Name>
description:	"Specify name of Finnish Kernal ROM image"
resource:		"KernalFIName"
action:		N/A

c128/c128-cmdline-options.c:
----------------------------
command line:	-kernalfr <Name>
description:	"Specify name of French Kernal ROM image"
resource:		"KernalFRName"
action:		N/A

c128/c128-cmdline-options.c:
----------------------------
command line:	-kernalit <Name>
description:	"Specify name of Italian Kernal ROM image"
resource:		"KernalITName"
action:		N/A

c128/c128-cmdline-options.c:
----------------------------
command line:	-kernalno <Name>
description:	"Specify name of Norwegian Kernal ROM image"
resource:		"KernalNOName"
action:		N/A

c128/c128-cmdline-options.c:
----------------------------
command line:	-kernalse <Name>
description:	"Specify name of Swedish Kernal ROM image"
resource:		"KernalSEName"
action:		N/A

c128/c128-cmdline-options.c:
----------------------------
command line:	-kernalch <Name>
description:	"Specify name of Swiss Kernal ROM image"
resource:		"KernalCHName"
action:		N/A

c128/c128-cmdline-options.c:
----------------------------
command line:	-basiclo <Name>
description:	"Specify name of BASIC ROM image (lower part)"
resource:		"BasicLoName"
action:		N/A

c128/c128-cmdline-options.c:
----------------------------
command line:	-basichi <Name>
description:	"Specify name of BASIC ROM image (higher part)"
resource:		"BasicHiName"
action:		N/A

c128/c128-cmdline-options.c:
----------------------------
command line:	-chargen <Name>
description:	"Specify name of international character generator ROM image"
resource:		"ChargenIntName"
action:		N/A

c128/c128-cmdline-options.c:
----------------------------
command line:	-chargde <Name>
description:	"Specify name of German character generator ROM image"
resource:		"ChargenDEName"
action:		N/A

c128/c128-cmdline-options.c:
----------------------------
command line:	-chargfr <Name>
description:	"Specify name of French character generator ROM image"
resource:		"ChargenFRName"
action:		N/A

c128/c128-cmdline-options.c:
----------------------------
command line:	-chargse <Name>
description:	"Specify name of Swedish character generator ROM image"
resource:		"ChargenSEName"
action:		N/A

c128/c128-cmdline-options.c:
----------------------------
command line:	-chargch <Name>
description:	"Specify name of Swedish character generator ROM image"
resource:		"ChargenCHName"
action:		N/A

c128/c128-cmdline-options.c:
----------------------------
command line:	-kernal64 <Name>
description:	"Specify name of C64 mode Kernal ROM image"
resource:		"Kernal64Name"
action:		N/A

c128/c128-cmdline-options.c:
----------------------------
command line:	-basic64 <Name>
description:	"Specify name of C64 mode BASIC ROM image"
resource:		"Basic64Name"
action:		N/A

c128/c128-cmdline-options.c:
----------------------------
command line:	-kernalrev <Revision>
description:	"Patch the Kernal ROM to the specified <revision>"
resource:		"KernalRev"
action:		N/A

c128/c128-cmdline-options.c:
----------------------------
command line:	-acia1
description:	"Enable the ACIA RS232 interface emulation"
resource:		"Acia1Enable" (set to 1)
action:		N/A

c128/c128-cmdline-options.c:
----------------------------
command line:	+acia1
description:	"Disable the ACIA RS232 interface emulation"
resource:		"Acia1Enable" (set to 0)
action:		N/A

c128/c128-cmdline-options.c:
----------------------------
command line:	-keymap <number>
description:	"Specify index of keymap file (0=symbol, 1=positional)"
resource:		"KeymapIndex"
action:		N/A

c128/c128-cmdline-options.c:
----------------------------
command line:	-symkeymap <Name>
description:	"Specify name of symbolic keymap file"
resource:		"KeymapSymFile"
action:		N/A

c128/c128-cmdline-options.c:
----------------------------
command line:	-poskeymap <Name>
description:	"Specify name of positional keymap file"
resource:		"KeymapPosFile"
action:		N/A

c128/c128-cmdline-options.c:
----------------------------
command line:	-ciamodel <Model>
description:	"Set both CIA models (0 = old 6526, 1 = new 6526A)"
resource:		N/A
action:		set_cia_model() (sets "CIA1Model" and "CIA2Model")

c128/c128-cmdline-options.c:
----------------------------
command line:	-cia1model <Model>
description:	"Set CIA 1 model (0 = old 6526, 1 = new 6526A)"
resource:		"CIA1Model"
action:		N/A

c128/c128-cmdline-options.c:
----------------------------
command line:	-cia2model <Model>
description:	"Set CIA 2 model (0 = old 6526, 1 = new 6526A)"
resource:		"CIA2Model"
action:		N/A

c128/c128-cmdline-options.c:
----------------------------
command line:	-model <Model>
description:	"Set C128 model (c128/c128dcr, pal/ntsc)"
resource:		N/A
action:		set_c128_model() (sets "MachineVideoStandard", "CIA1Model", "CIA2Model", "VICIINewLuminances", "VDCRevision", "VDC64KB",
			"SidEngine" and "SidModel");

c128/c128-cmdline-options.c:
----------------------------
command line:	-c128fullbanks
description:	"Enable RAM banks 2 and 3"
resource:		"C128FullBanks" (set to 1)
action:		N/A

c128/c128-cmdline-options.c:
----------------------------
command line:	+c128fullbanks
description:	"Disable RAM banks 2 and 3"
resource:		"C128FullBanks" (set to 0)
action:		N/A

c128/c128mmu.c:
---------------
command line:	-40col
description:	"Activate 40 column mode"
resource:		"40/80ColumnKey" (set to 1)
action:		N/A

c128/c128mmu.c:
---------------
command line:	-80col
description:	"Activate 80 column mode"
resource:		"40/80ColumnKey" (set to 0)
action:		N/A

c128/c128mmu.c:
---------------
command line:	-go64
description:	"Always switch to C64 mode on reset"
resource:		"Go64Mode" (set to 1)
action:		N/A

c128/c128mmu.c:
---------------
command line:	+go64
description:	"Always switch to C128 mode on reset"
resource:		"Go64Mode" (set to 0)
action:		N/A

c128/functionrom.c:
-------------------
command line:	-intfrom <Name>
description:	"Specify name of internal Function ROM image"
resource:		"InternalFunctionName"
action:		N/A

c128/functionrom.c:
-------------------
command line:	-extfrom <Name>
description:	"Specify name of external Function ROM image"
resource:		"ExternalFunctionName"
action:		N/A

c128/functionrom.c:
-------------------
command line:	-intfunc <Type>
description:	"Type of internal Function ROM: (0: None, 1: ROM, 2: RAM, 3: RTC)"
resource:		"InternalFunctionROM"
action:		N/A

c128/functionrom.c:
-------------------
command line:	-extfunc <Type>
description:	"Type of external Function ROM: (0: None, 1: ROM, 2: RAM, 3: RTC)"
resource:		"ExternalFunctionROM"
action:		N/A

c64/c64-cmdline-options.c:
--------------------------
command line:	-pal
description:	"Use PAL sync factor"
resource:		N/A
action:		set_video_standard() (sets "MachineVideoStandard" and "VICIIModel")

c64/c64-cmdline-options.c:
--------------------------
command line:	-ntsc
description:	"Use NTSC sync factor"
resource:		N/A
action:		set_video_standard() (sets "MachineVideoStandard" and "VICIIModel")

c64/c64-cmdline-options.c:
--------------------------
command line:	-ntscold
description:	"Use old NTSC sync factor"
resource:		N/A
action:		set_video_standard() (sets "MachineVideoStandard" and "VICIIModel")

c64/c64-cmdline-options.c:
--------------------------
command line:	-paln
description:	"Use PAL-N sync factor"
resource:		N/A
action:		set_video_standard() (sets "MachineVideoStandard" and "VICIIModel")

c64/c64-cmdline-options.c:
--------------------------
command line:	-kernal <Name>
description:	"Specify name of Kernal ROM image"
resource:		"KernalName"
action:		N/A

c64/c64-cmdline-options.c:
--------------------------
command line:	-basic <Name>
description:	"Specify name of BASIC ROM image"
resource:		"BasicName"
action:		N/A

c64/c64-cmdline-options.c:
--------------------------
command line:	-chargen <Name>
description:	"Specify name of character generator ROM image"
resource:		"ChargenName"
action:		N/A

c64/c64-cmdline-options.c:
--------------------------
command line:	-kernalrev <Revision>
description:	"Patch the Kernal ROM to the specified <revision>"
resource:		"KernalRev"
action:		N/A

c64/c64-cmdline-options.c:
--------------------------
command line:	-acia1
description:	"Enable the ACIA RS232 interface emulation"
resource:		"Acia1Enable" (set to 1)
action:		N/A

c64/c64-cmdline-options.c:
--------------------------
command line:	+acia1
description:	"Disable the ACIA RS232 interface emulation"
resource:		"Acia1Enable" (set to 0)
action:		N/A

c64/c64-cmdline-options.c:
--------------------------
command line:	-keymap <number>
description:	"Specify index of keymap file (0=sym, 1=symDE, 2=pos)"
resource:		"KeymapIndex"
action:		N/A

c64/c64-cmdline-options.c:
--------------------------
command line:	-symkeymap <Name>
description:	"Specify name of symbolic keymap file"
resource:		"KeymapSymFile"
action:		N/A

c64/c64-cmdline-options.c:
--------------------------
command line:	-symdekeymap <Name>
description:	"Specify name of symbolic German keymap file"
resource:		"KeymapSymDeFile"
action:		N/A

c64/c64-cmdline-options.c:
--------------------------
command line:	-poskeymap <Name>
description:	"Specify name of positional keymap file"
resource:		"KeymapPosFile"
action:		N/A

c64/c64-cmdline-options.c:
--------------------------
command line:	-ciamodel <Model>
description:	"Set both CIA models (0 = old 6526, 1 = new 6526A)"
resource:		N/A
action:		set_cia_model() (sets CIA1Model and CIA2Model)

c64/c64-cmdline-options.c:
--------------------------
command line:	-cia1model <Model>
description:	"Set CIA 1 model (0 = old 6526, 1 = new 6526A)"
resource:		"CIA1Model"
action:		N/A

c64/c64-cmdline-options.c:
--------------------------
command line:	-cia2model <Model>
description:	"Set CIA 2 model (0 = old 6526, 1 = new 6526A)"
resource:		"CIA2Model"
action:		N/A

c64/c64-cmdline-options.c:
--------------------------
command line:	-model <Model>
description:	"Set C64 model (c64/c64c/c64old, ntsc/newntsc/oldntsc, drean, jap, c64gs, pet64, ultimax)"
resource:		N/A
action:		set_c64_model() (sets "VICIIModel", "CIA1Model", "CIA2Model", "GlueLogic", "BoardType", "IECReset", "KernalName", "ChargenName",
			"SidEngine" and "SidModel")

c64/c64-cmdline-options.c:
--------------------------
command line:	-burstmod <value>
description:	"Burst modification (0 = None, 1 = CIA1, 2 = CIA2)"
resource:		"BurstMod"
action:		N/A

c64/c64-cmdline-options.c:
--------------------------
command line:	-iecreset <value>
description:	"Computer reset goes to IEC bus (0 = No, 1 = Yes)"
resource:		"IECReset"
action:		N/A

c64/c64gluelogic.c:
-------------------
command line:	-gluelogictype <Type>
description:	"Set glue logic type (0 = discrete, 1 = 252535-01)"
resource:		"GlueLogic"
action:		N/A

c64/c64io.c:
------------
command line:	-iocollision <method>
description:	"Select the way the I/O collisions should be handled, (0: error message and detach all involved carts, 1: error message and detach last attached involved carts, 2: warning in log and 'AND' the valid return values"
resource:		"IOCollisionHandling"
action:		N/A

c64/c64_256k.c:
---------------
command line:	-256k
description:	"Enable the 256K RAM expansion"
resource:		"C64_256K" (set to 1)
action:		N/A

c64/c64_256k.c:
---------------
command line:	+256k
description:	"Disable the 256K RAM expansion"
resource:		"C64_256K" (set to 0)
action:		N/A

c64/c64_256k.c:
---------------
command line:	-256kimage <Name>
description:	"Specify name of 256K image"
resource:		"C64_256Kfilename"
action:		N/A

c64/c64_256k.c:
---------------
command line:	-256kbase <Base address>
description:	"Base address of the 256K expansion"
resource:		"C64_256Kbase"
action:		N/A

c64/cart/c64-midi.c:
--------------------
command line:	-miditype <0-4>
description:	"MIDI interface type (0: Sequential, 1: Passport, 2: DATEL, 3: Namesoft, 4: Maplin)"
resource:		"MIDIMode"
action:		N/A

c64/cart/c64cart.c:
-------------------
command line:	-cartreset
description:	"Reset machine if a cartridge is attached or detached"
resource:		"CartridgeReset" (set to 1)
action:		N/A

c64/cart/c64cart.c:
-------------------
command line:	+cartreset
description:	"Do not reset machine if a cartridge is attached or detached"
resource:		"CartridgeReset" (set to 0)
action:		N/A

c64/cart/c64cart.c:
-------------------
command line:	+cart
description:	"Disable default cartridge"
resource:		N/A
action:		cart_attach_cmdline() (fixme: research resources affected)

c64/cart/c64carthooks.c:
------------------------
command line:	-cart8 <Name>
description:	"Attach raw 8KB cartridge image"
resource:		N/A
action:		cart_attach_cmdline() (fixme: research resources affected)

c64/cart/c64carthooks.c:
------------------------
command line:	-cart16 <Name>
description:	"Attach raw 16KB cartridge image"
resource:		N/A
action:		cart_attach_cmdline() (fixme: research resources affected)

c64/cart/c64carthooks.c:
------------------------
command line:	-cartultimax <Name>
description:	"Attach generic 16kB Ultimax cartridge image"
resource:		N/A
action:		cart_attach_cmdline() (fixme: research resources affected)

c64/cart/c64carthooks.c:
------------------------
command line:	-cartcrt <Name>
description:	"Attach CRT cartridge image"
resource:		N/A
action:		cart_attach_cmdline() (fixme: research resources affected)

c64/cart/c64carthooks.c:
------------------------
command line:	-cartap <Name>
description:	"Attach raw 32KB Atomic Power cartridge image"
resource:		N/A
action:		cart_attach_cmdline() (fixme: research resources affected)

c64/cart/c64carthooks.c:
------------------------
command line:	-cartar2 <Name>
description:	"Attach raw 16kB Action Replay MK2 cartridge image"
resource:		N/A
action:		cart_attach_cmdline() (fixme: research resources affected)

c64/cart/c64carthooks.c:
------------------------
command line:	-cartar3 <Name>
description:	"Attach raw 16KB Action Replay MK3 cartridge image"
resource:		N/A
action:		cart_attach_cmdline() (fixme: research resources affected)

c64/cart/c64carthooks.c:
------------------------
command line:	-cartar4 <Name>
description:	"Attach raw 32KB Action Replay MK4 cartridge image"
resource:		N/A
action:		cart_attach_cmdline() (fixme: research resources affected)

c64/cart/c64carthooks.c:
------------------------
command line:	-cartar5 <Name>
description:	"Attach raw 32KB Action Replay cartridge image"
resource:		N/A
action:		cart_attach_cmdline() (fixme: research resources affected)

c64/cart/c64carthooks.c:
------------------------
command line:	-cartcap <Name>
description:	"Attach raw 8kB Capture cartridge image"
resource:		N/A
action:		cart_attach_cmdline() (fixme: research resources affected)

c64/cart/c64carthooks.c:
------------------------
command line:	-cartcomal <Name>
description:	"Attach raw 64kB Comal 80 cartridge image"
resource:		N/A
action:		cart_attach_cmdline() (fixme: research resources affected)

c64/cart/c64carthooks.c:
------------------------
command line:	-cartdep256 <Name>
description:	"Attach raw Dela EP256 cartridge image"
resource:		N/A
action:		cart_attach_cmdline() (fixme: research resources affected)

c64/cart/c64carthooks.c:
------------------------
command line:	-cartdep64 <Name>
description:	"Attach raw Dela EP64 cartridge image"
resource:		N/A
action:		cart_attach_cmdline() (fixme: research resources affected)

c64/cart/c64carthooks.c:
------------------------
command line:	-cartdep7x8 <Name>
description:	"Attach raw Dela EP7x8 cartridge image"
resource:		N/A
action:		cart_attach_cmdline() (fixme: research resources affected)

c64/cart/c64carthooks.c:
------------------------
command line:	-cartdin <Name>
description:	"Attach raw 128kB Dinamic cartridge image"
resource:		N/A
action:		cart_attach_cmdline() (fixme: research resources affected)

c64/cart/c64carthooks.c:
------------------------
command line:	-cartdsm <Name>
description:	"Attach raw 8kB Diashow-Maker cartridge image"
resource:		N/A
action:		cart_attach_cmdline() (fixme: research resources affected)

c64/cart/c64carthooks.c:
------------------------
command line:	-cartdqbb <Name>
description:	"Attach raw 16kB Double Quick Brown Box cartridge image"
resource:		N/A
action:		cart_attach_cmdline() (fixme: research resources affected)

c64/cart/c64carthooks.c:
------------------------
command line:	-carteasy <Name>
description:	"Attach raw EasyFlash cartridge image"
resource:		N/A
action:		cart_attach_cmdline() (fixme: research resources affected)

c64/cart/c64carthooks.c:
------------------------
command line:	-cartepyx <Name>
description:	"Attach raw 8KB Epyx FastLoad cartridge image"
resource:		N/A
action:		cart_attach_cmdline() (fixme: research resources affected)

c64/cart/c64carthooks.c:
------------------------
command line:	-cartexos <Name>
description:	"Attach raw 8kB EXOS cartridge image"
resource:		N/A
action:		cart_attach_cmdline() (fixme: research resources affected)

c64/cart/c64carthooks.c:
------------------------
command line:	-cartexpert <Name>
description:	"Attach raw 8kB Expert Cartridge image"
resource:		N/A
action:		cart_attach_cmdline() (fixme: research resources affected)

c64/cart/c64carthooks.c:
------------------------
command line:	-cartf64 <Name>
description:	"Attach raw 32kB Formel 64 image"
resource:		N/A
action:		cart_attach_cmdline() (fixme: research resources affected)

c64/cart/c64carthooks.c:
------------------------
command line:	-cartfc1 <Name>
description:	"Attach raw 16kB Final Cartridge image"
resource:		N/A
action:		cart_attach_cmdline() (fixme: research resources affected)

c64/cart/c64carthooks.c:
------------------------
command line:	-cartfc3 <Name>
description:	"Attach raw 64kB Final Cartridge III image"
resource:		N/A
action:		cart_attach_cmdline() (fixme: research resources affected)

c64/cart/c64carthooks.c:
------------------------
command line:	-cartfcplus <Name>
description:	"Attach raw 32kB Final Cartridge Plus image"
resource:		N/A
action:		cart_attach_cmdline() (fixme: research resources affected)

c64/cart/c64carthooks.c:
------------------------
command line:	-cartff <Name>
description:	"Attach raw 8kB Freeze Frame image"
resource:		N/A
action:		cart_attach_cmdline() (fixme: research resources affected)

c64/cart/c64carthooks.c:
------------------------
command line:	-cartfm <Name>
description:	"Attach raw 32kB Freeze Machine image"
resource:		N/A
action:		cart_attach_cmdline() (fixme: research resources affected)

c64/cart/c64carthooks.c:
------------------------
command line:	-cartfp <Name>
description:	"Attach raw 128kB Fun Play/Power Play cartridge image"
resource:		N/A
action:		cart_attach_cmdline() (fixme: research resources affected)

c64/cart/c64carthooks.c:
------------------------
command line:	-cartgk <Name>
description:	"Attach raw 8KB Game Killer cartridge image"
resource:		N/A
action:		cart_attach_cmdline() (fixme: research resources affected)

c64/cart/c64carthooks.c:
------------------------
command line:	-cartgeoram <Name>
description:	"Attach raw GEO-RAM cartridge image"
resource:		N/A
action:		cart_attach_cmdline() (fixme: research resources affected)

c64/cart/c64carthooks.c:
------------------------
command line:	-cartgs <Name>
description:	"Attach raw 512kB Game System cartridge image"
resource:		N/A
action:		cart_attach_cmdline() (fixme: research resources affected)

c64/cart/c64carthooks.c:
------------------------
command line:	-cartide64 <Name>
description:	"Attach raw 64KB IDE64 cartridge image"
resource:		N/A
action:		cart_attach_cmdline() (fixme: research resources affected)

c64/cart/c64carthooks.c:
------------------------
command line:	-cartieee <Name>
description:	"Attach IEEE-488 Interface cartridge image"
resource:		N/A
action:		cart_attach_cmdline() (fixme: research resources affected)

c64/cart/c64carthooks.c:
------------------------
command line:	-cartisepic <Name>
description:	"Attach raw 2kB ISEPIC cartridge image"
resource:		N/A
action:		cart_attach_cmdline() (fixme: research resources affected)

c64/cart/c64carthooks.c:
------------------------
command line:	-cartkcs <Name>
description:	"Attach raw 16kB KCS Power cartridge image"
resource:		N/A
action:		cart_attach_cmdline() (fixme: research resources affected)

c64/cart/c64carthooks.c:
------------------------
command line:	-cartks <Name>
description:	"Attach raw 24kB Kingsoft cartridge image"
resource:		N/A
action:		cart_attach_cmdline() (fixme: research resources affected)

c64/cart/c64carthooks.c:
------------------------
command line:	-cartmach5 <Name>
description:	"Attach raw 8kB MACH 5 cartridge image"
resource:		N/A
action:		cart_attach_cmdline() (fixme: research resources affected)

c64/cart/c64carthooks.c:
------------------------
command line:	-cartmd <Name>
description:	"Attach raw 32/64/128kB Magic Desk cartridge image"
resource:		N/A
action:		cart_attach_cmdline() (fixme: research resources affected)

c64/cart/c64carthooks.c:
------------------------
command line:	-cartmf <Name>
description:	"Attach raw Magic Formel cartridge image"
resource:		N/A
action:		cart_attach_cmdline() (fixme: research resources affected)

c64/cart/c64carthooks.c:
------------------------
command line:	-cartmikro <Name>
description:	"Attach raw 8kB Mikro Assembler cartridge image"
resource:		N/A
action:		cart_attach_cmdline() (fixme: research resources affected)

c64/cart/c64carthooks.c:
------------------------
command line:	-cartmmc64 <Name>
description:	"Attach raw 8kB MMC64 cartridge image"
resource:		N/A
action:		cart_attach_cmdline() (fixme: research resources affected)

c64/cart/c64carthooks.c:
------------------------
command line:	-cartmmcr <Name>
description:	"Attach raw 512kB MMC Replay cartridge image"
resource:		N/A
action:		cart_attach_cmdline() (fixme: research resources affected)

c64/cart/c64carthooks.c:
------------------------
command line:	-cartmv <Name>
description:	"Attach raw 16kB Magic Voice cartridge image"
resource:		N/A
action:		cart_attach_cmdline() (fixme: research resources affected)

c64/cart/c64carthooks.c:
------------------------
command line:	-cartocean <Name>
description:	"Attach raw Ocean cartridge image"
resource:		N/A
action:		cart_attach_cmdline() (fixme: research resources affected)

c64/cart/c64carthooks.c:
------------------------
command line:	-cartpf <Name>
description:	"Attach raw 64KB Pagefox cartridge image"
resource:		N/A
action:		cart_attach_cmdline() (fixme: research resources affected)

c64/cart/c64carthooks.c:
------------------------
command line:	-cartp64 <Name>
description:	"Attach raw 256KB Prophet 64 cartridge image"
resource:		N/A
action:		cart_attach_cmdline() (fixme: research resources affected)

c64/cart/c64carthooks.c:
------------------------
command line:	-cartramcart <Name>
description:	"Attach raw RamCart cartridge image"
resource:		N/A
action:		cart_attach_cmdline() (fixme: research resources affected)

c64/cart/c64carthooks.c:
------------------------
command line:	-cartreu <Name>
description:	"Attach raw REU cartridge image"
resource:		N/A
action:		cart_attach_cmdline() (fixme: research resources affected)

c64/cart/c64carthooks.c:
------------------------
command line:	-cartrep256 <Name>
description:	"Attach raw REX EP256 cartridge image"
resource:		N/A
action:		cart_attach_cmdline() (fixme: research resources affected)

c64/cart/c64carthooks.c:
------------------------
command line:	-cartross <Name>
description:	"Attach raw 16/32kB ROSS cartridge image"
resource:		N/A
action:		cart_attach_cmdline() (fixme: research resources affected)

c64/cart/c64carthooks.c:
------------------------
command line:	-cartrr <Name>
description:	"Attach raw 64KB Retro Replay cartridge image"
resource:		N/A
action:		cart_attach_cmdline() (fixme: research resources affected)

c64/cart/c64carthooks.c:
------------------------
command line:	-cartru <Name>
description:	"Attach raw 8kB REX Utility cartridge image"
resource:		N/A
action:		cart_attach_cmdline() (fixme: research resources affected)

c64/cart/c64carthooks.c:
------------------------
command line:	-carts64 <Name>
description:	"Attach raw 4kB Snapshot 64 cartridge image"
resource:		N/A
action:		cart_attach_cmdline() (fixme: research resources affected)

c64/cart/c64carthooks.c:
------------------------
command line:	-cartsb <Name>
description:	"Attach raw Structured Basic cartridge image"
resource:		N/A
action:		cart_attach_cmdline() (fixme: research resources affected)

c64/cart/c64carthooks.c:
------------------------
command line:	-cartse5 <Name>
description:	"Attach raw 16kB Super Explode V5 cartridge image"
resource:		N/A
action:		cart_attach_cmdline() (fixme: research resources affected)

c64/cart/c64carthooks.c:
------------------------
command line:	-cartsg <Name>
description:	"Attach raw 64kB Super Games cartridge image"
resource:		N/A
action:		cart_attach_cmdline() (fixme: research resources affected)

c64/cart/c64carthooks.c:
------------------------
command line:	-cartsilver <Name>
description:	"Attach raw Silverrock 128 cartridge image"
resource:		N/A
action:		cart_attach_cmdline() (fixme: research resources affected)

c64/cart/c64carthooks.c:
------------------------
command line:	-cartsimon <Name>
description:	"Attach raw 16kB Simons Basic cartridge image"
resource:		N/A
action:		cart_attach_cmdline() (fixme: research resources affected)

c64/cart/c64carthooks.c:
------------------------
command line:	-cartss4 <Name>
description:	"Attach raw 32KB Super Snapshot V4 cartridge image"
resource:		N/A
action:		cart_attach_cmdline() (fixme: research resources affected)

c64/cart/c64carthooks.c:
------------------------
command line:	-cartss5 <Name>
description:	"Attach raw 64KB Super Snapshot V5 cartridge image"
resource:		N/A
action:		cart_attach_cmdline() (fixme: research resources affected)

c64/cart/c64carthooks.c:
------------------------
command line:	-cartstar <Name>
description:	"Attach raw 16KB Stardos cartridge image"
resource:		N/A
action:		cart_attach_cmdline() (fixme: research resources affected)

c64/cart/c64carthooks.c:
------------------------
command line:	-cartwl <Name>
description:	"Attach raw 16KB Westermann Learning cartridge image"
resource:		N/A
action:		cart_attach_cmdline() (fixme: research resources affected)

c64/cart/c64carthooks.c:
------------------------
command line:	-cartws <Name>
description:	"Attach raw 8kB Warp Speed cartridge image"
resource:		N/A
action:		cart_attach_cmdline() (fixme: research resources affected)

c64/cart/c64carthooks.c:
------------------------
command line:	-cartzaxxon <Name>
description:	"Attach raw 16kB Zaxxon cartridge image"
resource:		N/A
action:		cart_attach_cmdline() (fixme: research resources affected)

c64/cart/c64tpi.c:
------------------
command line:	-ieee488
description:	"Enable the IEEE488 interface emulation"
resource:		"IEEE488" (set to 1)
action:		N/A

c64/cart/c64tpi.c:
------------------
command line:	+ieee488
description:	"Disable the IEEE488 interface emulation"
resource:		"IEEE488" (set to 0)
action:		N/A

c64/cart/c64tpi.c:
------------------
command line:	-ieee488image <Name>
description:	"specify IEEE488 interface image name"
resource:		"IEEE488Image"
action:		N/A

c64/cart/digimax.c:
-------------------
command line:	-digimax
description:	"Enable the DigiMAX cartridge"
resource:		"DIGIMAX" (set to 1)
action:		N/A

c64/cart/digimax.c:
-------------------
command line:	+digimax
description:	"Disable the DigiMAX cartridge"
resource:		"DIGIMAX" (set to 0)
action:		N/A

c64/cart/digimax.c:
-------------------
command line:	-digimaxbase <Base address>
description:	"Base address of the DigiMAX cartridge"
resource:		"DIGIMAXbase"
action:		N/A

c64/cart/dqbb.c:
----------------
command line:	-dqbb
description:	"Enable Double Quick Brown Box"
resource:		"DQBB" (set to 1)
action:		N/A

c64/cart/dqbb.c:
----------------
command line:	+dqbb
description:	"Disable Double Quick Brown Box"
resource:		"DQBB" (set to 0)
action:		N/A

c64/cart/dqbb.c:
----------------
command line:	-dqbbimage <Name>
description:	"Specify Double Quick Brown Box filename"
resource:		"DQBBfilename"
action:		N/A

c64/cart/dqbb.c:
----------------
command line:	-dqbbimagerw
description:	"Allow writing to DQBB image"
resource:		"DQBBImageWrite" (set to 1)
action:		N/A

c64/cart/dqbb.c:
----------------
command line:	+dqbbimagerw
description:	"Do not write to DQBB image"
resource:		"DQBBImageWrite" (set to 0)
action:		N/A

c64/cart/ds12c887rtc.c:
-----------------------
command line:	-ds12c887rtc
description:	"Enable the DS12C887 RTC cartridge"
resource:		"DS12C887RTC" (set to 1)
action:		N/A

c64/cart/ds12c887rtc.c:
-----------------------
command line:	+ds12c887rtc
description:	"Disable the DS12C887 RTC cartridge"
resource:		"DS12C887RTC" (set to 0)
action:		N/A

c64/cart/ds12c887rtc.c:
-----------------------
command line:	-ds12c887rtcbase <Base address>
description:	"Base address of the DS12C887 RTC cartridge"
resource:		"DS12C887RTCbase"
action:		N/A

c64/cart/ds12c887rtc.c:
-----------------------
command line:	-ds12c887rtchalted
description:	"Set the RTC oscillator to 'halted'"
resource:		"DS12C887RTCRunMode" (set to 0)
action:		N/A

c64/cart/ds12c887rtc.c:
-----------------------
command line:	-ds12c887rtcrunning
description:	"Set the RTC oscillator to 'running'"
resource:		"DS12C887RTCRunMode" (set to 1)
action:		N/A

c64/cart/easyflash.c:
---------------------
command line:	-easyflashjumper
description:	"Enable EasyFlash jumper"
resource:		"EasyFlashJumper" (set to 1)
action:		N/A

c64/cart/easyflash.c:
---------------------
command line:	+easyflashjumper
description:	"Disable EasyFlash jumper"
resource:		"EasyFlashJumper" (set to 0)
action:		N/A

c64/cart/easyflash.c:
---------------------
command line:	-easyflashcrtwrite
description:	"Enable writing to EasyFlash .crt image"
resource:		"EasyFlashWriteCRT" (set to 1)
action:		N/A

c64/cart/easyflash.c:
---------------------
command line:	+easyflashcrtwrite
description:	"Disable writing to EasyFlash .crt image"
resource:		"EasyFlashWriteCRT" (set to 0)
action:		N/A

c64/cart/expert.c:
------------------
command line:	-expert
description:	"Enable the Expert Cartridge"
resource:		"ExpertCartridgeEnabled" (set to 1)
action:		N/A

c64/cart/expert.c:
------------------
command line:	+expert
description:	"Disable the Expert Cartridge"
resource:		"ExpertCartridgeEnabled" (set to 0)
action:		N/A

c64/cart/expert.c:
------------------
command line:	-expertimagename <Name>
description:	"Set Expert Cartridge image name"
resource:		"Expertfilename"
action:		N/A

c64/cart/expert.c:
------------------
command line:	-expertimagerw
description:	"Allow writing to Expert Cartridge image"
resource:		"ExpertImageWrite" (set to 1)
action:		N/A

c64/cart/expert.c:
------------------
command line:	+expertimagerw
description:	"Do not write to Expert Cartridge image"
resource:		"ExpertImageWrite" (set to 0)
action:		N/A

c64/cart/georam.c:
------------------
command line:	-georam
description:	"Enable the GEO-RAM expansion unit"
resource:		"GEORAM" (set to 1)
action:		N/A

c64/cart/georam.c:
------------------
command line:	+georam
description:	"Disable the GEO-RAM expansion unit"
resource:		"GEORAM" (set to 0)
action:		N/A

c64/cart/georam.c:
------------------
command line:	-georamsize <size in KB>
description:	"Size of the GEORAM expansion unit"
resource:		"GEORAMsize"
action:		N/A

c64/cart/georam.c:
------------------
command line:	-georamimage <Name>
description:	"Specify name of GEORAM image"
resource:		"GEORAMfilename"
action:		N/A

c64/cart/georam.c:
------------------
command line:	-georamimagerw
description:	"Allow writing to GEORAM image"
resource:		"GEORAMImageWrite" (set to 1)
action:		N/A

c64/cart/georam.c:
------------------
command line:	+georamimagerw
description:	"Do not write to GEORAM image"
resource:		"GEORAMImageWrite" (set to 0)
action:		N/A

c64/cart/georam.c:
------------------
command line:	-georamioswap
description:	"Swap io mapping (map cart I/O-1 to VIC20 I/O-3 and cart I/O-2 to VIC20 I/O-2)"
resource:		"GEORAMIOSwap" (set to 1)
action:		N/A

c64/cart/georam.c:
------------------
command line:	+georamioswap
description:	"Don't swap io mapping (map cart I/O-1 to VIC20 I/O-2 and cart I/O-2 to VIC20 I/O-3)"
resource:		"GEORAMIOSwap" (set to 0)
action:		N/A

c64/cart/ide64.c:
-----------------
command line:	-IDE64image1 <Name>
description:	"Specify name of IDE64 image file"
resource:		"IDE64Image1"
action:		N/A

c64/cart/ide64.c:
-----------------
command line:	-IDE64image2 <Name>
description:	"Specify name of IDE64 image file"
resource:		"IDE64Image2"
action:		N/A

c64/cart/ide64.c:
-----------------
command line:	-IDE64image3 <Name>
description:	"Specify name of IDE64 image file"
resource:		"IDE64Image3"
action:		N/A

c64/cart/ide64.c:
-----------------
command line:	-IDE64image4 <Name>
description:	"Specify name of IDE64 image file"
resource:		"IDE64Image4"
action:		N/A

c64/cart/ide64.c:
-----------------
command line:	-IDE64cyl1 <value>
description:	"Set number of cylinders for the IDE64 emulation"
resource:		"IDE64Cylinders1"
action:		N/A

c64/cart/ide64.c:
-----------------
command line:	-IDE64cyl2 <value>
description:	"Set number of cylinders for the IDE64 emulation"
resource:		"IDE64Cylinders2"
action:		N/A

c64/cart/ide64.c:
-----------------
command line:	-IDE64cyl3 <value>
description:	"Set number of cylinders for the IDE64 emulation"
resource:		"IDE64Cylinders3"
action:		N/A

c64/cart/ide64.c:
-----------------
command line:	-IDE64cyl4 <value>
description:	"Set number of cylinders for the IDE64 emulation"
resource:		"IDE64Cylinders4"
action:		N/A

c64/cart/ide64.c:
-----------------
command line:	-IDE64hds1 <value>
description:	"Set number of heads for the IDE64 emulation"
resource:		"IDE64Heads1"
action:		N/A

c64/cart/ide64.c:
-----------------
command line:	-IDE64hds2 <value>
description:	"Set number of heads for the IDE64 emulation"
resource:		"IDE64Heads2"
action:		N/A

c64/cart/ide64.c:
-----------------
command line:	-IDE64hds3 <value>
description:	"Set number of heads for the IDE64 emulation"
resource:		"IDE64Heads3"
action:		N/A

c64/cart/ide64.c:
-----------------
command line:	-IDE64hds4 <value>
description:	"Set number of heads for the IDE64 emulation"
resource:		"IDE64Heads4"
action:		N/A

c64/cart/ide64.c:
-----------------
command line:	-IDE64sec1 <value>
description:	"Set number of sectors for the IDE64 emulation"
resource:		"IDE64Sectors1"
action:		N/A

c64/cart/ide64.c:
-----------------
command line:	-IDE64sec2 <value>
description:	"Set number of sectors for the IDE64 emulation"
resource:		"IDE64Sectors2"
action:		N/A

c64/cart/ide64.c:
-----------------
command line:	-IDE64sec3 <value>
description:	"Set number of sectors for the IDE64 emulation"
resource:		"IDE64Sectors3"
action:		N/A

c64/cart/ide64.c:
-----------------
command line:	-IDE64sec4 <value>
description:	"Set number of sectors for the IDE64 emulation"
resource:		"IDE64Sectors4"
action:		N/A

c64/cart/ide64.c:
-----------------
command line:	-IDE64autosize1
description:	"Autodetect image size"
resource:		"IDE64AutodetectSize1" (set to 1)
action:		N/A

c64/cart/ide64.c:
-----------------
command line:	+IDE64autosize1
description:	"Do not autodetect geometry of formatted images"
resource:		"IDE64AutodetectSize1" (set to 0)
action:		N/A

c64/cart/ide64.c:
-----------------
command line:	-IDE64autosize2
description:	"Autodetect image size"
resource:		"IDE64AutodetectSize2" (set to 1)
action:		N/A

c64/cart/ide64.c:
-----------------
command line:	+IDE64autosize2
description:	"Do not autodetect geometry of formatted images"
resource:		"IDE64AutodetectSize2" (set to 0)
action:		N/A

c64/cart/ide64.c:
-----------------
command line:	-IDE64autosize3
description:	"Autodetect image size"
resource:		"IDE64AutodetectSize3" (set to 1)
action:		N/A

c64/cart/ide64.c:
-----------------
command line:	+IDE64autosize3
description:	"Do not autodetect geometry of formatted images"
resource:		"IDE64AutodetectSize3" (set to 0)
action:		N/A

c64/cart/ide64.c:
-----------------
command line:	-IDE64autosize4
description:	"Autodetect image size"
resource:		"IDE64AutodetectSize4" (set to 1)
action:		N/A

c64/cart/ide64.c:
-----------------
command line:	+IDE64autosize4
description:	"Do not autodetect geometry of formatted images"
resource:		"IDE64AutodetectSize4" (set to 0)
action:		N/A

c64/cart/ide64.c:
-----------------
command line:	-IDE64version4
description:	"Emulate version 4 hardware"
resource:		"IDE64version4" (set to 1)
action:		N/A

c64/cart/ide64.c:
-----------------
command line:	+IDE64version4
description:	"Emulate pre version 4 hardware"
resource:		"IDE64version4" (set to 0)
action:		N/A

c64/cart/ide64.c:
-----------------
command line:	-IDE64USB
description:	"Enable IDE64 USB server"
resource:		"IDE64USBServer" (set to 1)
action:		N/A

c64/cart/ide64.c:
-----------------
command line:	+IDE64USB
description:	"Disable IDE64 USB server"
resource:		"IDE64USBServer" (set to 0)
action:		N/A

c64/cart/ide64.c:
-----------------
command line:	-IDE64USBAddress <Name>
description:	"IDE64 USB server address"
resource:		"IDE64USBServerAddress"
action:		N/A

c64/cart/isepic.c:
------------------
command line:	-isepic
description:	"Enable the ISEPIC cartridge"
resource:		"IsepicCartridgeEnabled" (set to 1)
action:		N/A

c64/cart/isepic.c:
------------------
command line:	+isepic
description:	"Disable the ISEPIC cartridge"
resource:		"IsepicCartridgeEnabled" (set to 0)
action:		N/A

c64/cart/isepic.c:
------------------
command line:	-isepicimagename <Name>
description:	"Set ISEPIC image name"
resource:		"Isepicfilename"
action:		N/A

c64/cart/isepic.c:
------------------
command line:	-isepicimagerw
description:	"Allow writing to ISEPIC image"
resource:		"IsepicImageWrite" (set to 1)
action:		N/A

c64/cart/isepic.c:
------------------
command line:	+isepicimagerw
description:	"Do not write to ISEPIC image"
resource:		"IsepicImageWrite" (set to 0)
action:		N/A

c64/cart/mmc64.c:
-----------------
command line:	-mmc64
description:	"Enable the MMC64 expansion"
resource:		"MMC64" (set to 1)
action:		N/A

c64/cart/mmc64.c:
-----------------
command line:	+mmc64
description:	"Disable the MMC64 expansion"
resource:		"MMC64" (set to 0)
action:		N/A

c64/cart/mmc64.c:
-----------------
command line:	-mmc64bios <Name>
description:	"Specify name of MMC64 BIOS image"
resource:		"MMC64BIOSfilename"
action:		N/A

c64/cart/mmc64.c:
-----------------
command line:	-mmc64image <Name>
description:	"Specify name of MMC64 image"
resource:		"MMC64imagefilename"
action:		N/A

c64/cart/mmc64.c:
-----------------
command line:	-mmc64readonly
description:	"Set the MMC64 card to read-only"
resource:		"MMC64_RO" (set to 1)
action:		N/A

c64/cart/mmc64.c:
-----------------
command line:	-mmc64readwrite
description:	"Set the MMC64 card to read/write"
resource:		"MMC64_RO" (set to 0)
action:		N/A

c64/cart/mmc64.c:
-----------------
command line:	-mmc64bioswrite
description:	"Save the MMC64 bios when changed"
resource:		"MMC64_bios_write" (set to 1) (fixme: no option to set to 0)
action:		N/A

c64/cart/mmc64.c:
-----------------
command line:	-mmc64flash
description:	"Set the MMC64 Flash Jumper"
resource:		"MMC64_flashjumper" (set to 1)
action:		N/A

c64/cart/mmc64.c:
-----------------
command line:	+mmc64flash
description:	"Remove the MMC64 Flash Jumper"
resource:		"MMC64_flashjumper" (set to 0)
action:		N/A

c64/cart/mmcreplay.c:
---------------------
command line:	-mmcrrescue
description:	"Enable MMC Replay rescue mode"
resource:		"MMCRRescueMode" (set to 1)
action:		N/A

c64/cart/mmcreplay.c:
---------------------
command line:	+mmcrrescue
description:	"Disable MMC Replay rescue mode"
resource:		"MMCRRescueMode" (set to 0)
action:		N/A

c64/cart/mmcreplay.c:
---------------------
command line:	-mmcrimagerw
description:	"Allow writing to MMC Replay image"
resource:		"MMCRImageWrite" (set to 1)
action:		N/A

c64/cart/mmcreplay.c:
---------------------
command line:	+mmcrimagerw
description:	"Do not write to MMC Replay image"
resource:		"MMCRImageWrite" (set to 0)
action:		N/A

c64/cart/mmcreplay.c:
---------------------
command line:	-mmcrcardimage <filename>
description:	"Specify MMC Replay card image filename"
resource:		"MMCRCardImage"
action:		N/A

c64/cart/mmcreplay.c:
---------------------
command line:	-mmcrcardrw
description:	"Enable writes to MMC Replay card image"
resource:		"MMCRCardRW" (set to 1)
action:		N/A

c64/cart/mmcreplay.c:
---------------------
command line:	+mmcrcardrw
description:	"Disable writes to MMC Replay card image"
resource:		"MMCRCardRW" (set to 0)
action:		N/A

c64/cart/mmcreplay.c:
---------------------
command line:	-mmcreepromimage <filename>
description:	"Specify MMC Replay EEPROM image filename"
resource:		"MMCREEPROMImage"
action:		N/A

c64/cart/mmcreplay.c:
---------------------
command line:	-mmcreepromrw
description:	"Enable writes to MMC Replay EEPROM image"
resource:		"MMCREEPROMRW" (set to 1)
action:		N/A

c64/cart/mmcreplay.c:
---------------------
command line:	+mmcreepromrw
description:	"Disable writes to MMC Replay EEPROM image"
resource:		"MMCREEPROMRW" (set to 0)
action:		N/A

c64/cart/ramcart.c:
-------------------
command line:	-ramcart
description:	"Enable the RamCart expansion"
resource:		"RAMCART" (set to 1)
action:		N/A

c64/cart/ramcart.c:
-------------------
command line:	+ramcart
description:	"Disable the RamCart expansion"
resource:		"RAMCART" (set to 0)
action:		N/A

c64/cart/ramcart.c:
-------------------
command line:	-ramcartsize <size in KB>
description:	"Size of the RAMCART expansion"
resource:		"RAMCARTsize"
action:		N/A

c64/cart/ramcart.c:
-------------------
command line:	-ramcartimage <Name>
description:	"Specify name of RAMCART image"
resource:		"RAMCARTfilename"
action:		N/A

c64/cart/ramcart.c:
-------------------
command line:	-ramcartimagerw
description:	"Allow writing to RAMCart image"
resource:		"RAMCARTImageWrite" (set to 1)
action:		N/A

c64/cart/ramcart.c:
-------------------
command line:	+ramcartimagerw
description:	"Do not write to RAMCart image"
resource:		"RAMCARTImageWrite" (set to 0)
action:		N/A

c64/cart/retroreplay.c:
-----------------------
command line:	-rrbioswrite
description:	"Enable saving of the RR ROM at exit"
resource:		"RRBiosWrite" (set to 1)
action:		N/A

c64/cart/retroreplay.c:
-----------------------
command line:	+rrbioswrite
description:	"Disable saving of the RR ROM at exit"
resource:		"RRBiosWrite" (set to 0)
action:		N/A

c64/cart/retroreplay.c:
-----------------------
command line:	-rrbankjumper
description:	"Set RR Bank Jumper"
resource:		"RRBankJumper" (set to 1)
action:		N/A

c64/cart/retroreplay.c:
-----------------------
command line:	+rrbankjumper
description:	"Unset RR Bank Jumper"
resource:		"RRBankJumper" (set to 0)
action:		N/A

c64/cart/retroreplay.c:
-----------------------
command line:	-rrflashjumper
description:	"Set RR Flash Jumper"
resource:		"RRFlashJumper" (set to 1)
action:		N/A

c64/cart/retroreplay.c:
-----------------------
command line:	+rrflashjumper
description:	"Unset RR Bank Jumper"
resource:		"RRFlashJumper" (set to 0)
action:		N/A

c64/cart/reu.c:
---------------
command line:	-reu
description:	"Enable the RAM Expansion Unit"
resource:		"REU" (set to 1)
action:		N/A

c64/cart/reu.c:
---------------
command line:	+reu
description:	"Disable the RAM Expansion Unit"
resource:		"REU" (set to 0)
action:		N/A

c64/cart/reu.c:
---------------
command line:	-reusize <size in KB>
description:	"Size of the RAM expansion unit"
resource:		"REUsize"
action:		N/A

c64/cart/reu.c:
---------------
command line:	-reuimage <Name>
description:	"Specify name of REU image"
resource:		"REUfilename"
action:		N/A

c64/cart/reu.c:
---------------
command line:	-reuimagerw
description:	"Allow writing to REU image"
resource:		"REUImageWrite" (set to 1)
action:		N/A

c64/cart/reu.c:
---------------
command line:	+reuimagerw
description:	"Do not write to REU image"
resource:		"REUImageWrite" (set to 0)
action:		N/A

c64/cart/sfx_soundexpander.c:
-----------------------------
command line:	-sfxse
description:	"Enable the SFX Sound Expander cartridge"
resource:		"SFXSoundExpander" (set to 1)
action:		N/A

c64/cart/sfx_soundexpander.c:
-----------------------------
command line:	+sfxse
description:	"Disable the SFX Sound Expander cartridge"
resource:		"SFXSoundExpander" (set to 0)
action:		N/A

c64/cart/sfx_soundexpander.c:
-----------------------------
command line:	-sfxsetype <Type>
description:	"Set YM chip type (3526 / 3812)"
resource:		"SFXSoundExpanderChip"
action:		N/A

c64/cart/sfx_soundexpander.c:
-----------------------------
command line:	-sfxseioswap
description:	"Swap io mapping (map cart I/O to VIC20 I/O-2)"
resource:		"SFXSoundExpanderIOSwap" (set to 1)
action:		N/A

c64/cart/sfx_soundexpander.c:
-----------------------------
command line:	+sfxseioswap
description:	"Don't swap io mapping (map cart I/O to VIC20 I/O-3)"
resource:		"SFXSoundExpanderIOSwap" (set to 0)
action:		N/A

c64/cart/sfx_soundsampler.c:
----------------------------
command line:	-sfxss
description:	"Enable the SFX Sound Sampler cartridge"
resource:		"SFXSoundSampler" (set to 1)
action:		N/A

c64/cart/sfx_soundsampler.c:
----------------------------
command line:	+sfxss
description:	"Disable the SFX Sound Sampler cartridge"
resource:		"SFXSoundSampler" (set to 0)
action:		N/A

c64/cart/sfx_soundsampler.c:
----------------------------
command line:	-sfxssioswap
description:	"Swap io mapping (map cart I/O to VIC20 I/O-2)"
resource:		"SFXSoundSamplerIOSwap" (set to 1)
action:		N/A

c64/cart/sfx_soundsampler.c:
----------------------------
command line:	+sfxssioswap
description:	"Don't swap io mapping (map cart I/O to VIC20 I/O-3)"
resource:		"SFXSoundSamplerIOSwap" (set to 0)
action:		N/A

c64/cart/tfe.c:
---------------
command line:	-tfe
description:	"Enable the TFE (\"The Final Ethernet\") unit"
resource:		"ETHERNET_ACTIVE" (set to 1)
action:		N/A

c64/cart/tfe.c:
---------------
command line:	+tfe
description:	"Disable the TFE (\"The Final Ethernet\") unit"
resource:		"ETHERNET_ACTIVE" (set to 0)
action:		N/A

c64/cart/tfe.c:
---------------
command line:	-tfeif <Name>
description:	"Set the system ethernet interface for TFE emulation"
resource:		"ETHERNET_INTERFACE"
action:		N/A

c64/cart/tfe.c:
---------------
command line:	-tferrnet
description:	"Enable RRNet mode of TFE emulation"
resource:		"ETHERNET_AS_RR" (set to 1)
action:		N/A

c64/cart/tfe.c:
---------------
command line:	+tferrnet
description:	"Disable RRNet mode of TFE emulation"
resource:		"ETHERNET_AS_RR" (set to 0)
action:		N/A

c64/cart/tfe.c:
---------------
command line:	-tfeioswap
description:	"Swap io mapping (map cart I/O to VIC20 I/O-2)"
resource:		"TFEIOSwap" (set to 1)
action:		N/A

c64/cart/tfe.c:
---------------
command line:	+tfeioswap
description:	"Don't swap io mapping (map cart I/O to VIC20 I/O-3)"
resource:		"TFEIOSwap" (set to 0)
action:		N/A

c64/plus256k.c:
---------------
command line:	-plus256k
description:	"Enable the PLUS256K RAM expansion"
resource:		"PLUS256K" (set to 1)
action:		N/A

c64/plus256k.c:
---------------
command line:	+plus256k
description:	"Disable the PLUS256K RAM expansion"
resource:		"PLUS256K" (set to 0)
action:		N/A

c64/plus256k.c:
---------------
command line:	-plus256kimage <Name>
description:	"Specify name of PLUS256K image"
resource:		"PLUS256Kfilename"
action:		N/A

c64/plus60k.c:
--------------
command line:	-plus60k
description:	"Enable the PLUS60K RAM expansion"
resource:		"PLUS60K" (set to 1)
action:		N/A

c64/plus60k.c:
--------------
command line:	+plus60k
description:	"Disable the PLUS60K RAM expansion"
resource:		"PLUS60K" (set to 0)
action:		N/A

c64/plus60k.c:
--------------
command line:	-plus60kimage <Name>
description:	"Specify name of PLUS60K image"
resource:		"PLUS60Kfilename"
action:		N/A

c64/plus60k.c:
--------------
command line:	-plus60kbase <Base address>
description:	"Base address of the PLUS60K expansion"
resource:		"PLUS60Kbase"
action:		N/A

c64/psid.c:
-----------
command line:	-pal
description:	"Use PAL sync factor"
resource:		"MachineVideoStandard" (set to MACHINE_SYNC_PAL)
action:		N/A

c64/psid.c:
-----------
command line:	-ntsc
description:	"Use NTSC sync factor"
resource:		"MachineVideoStandard" (set to MACHINE_SYNC_NTSC)
action:		N/A

c64/psid.c:
-----------
command line:	-ntscold
description:	"Use old NTSC sync factor"
resource:		"MachineVideoStandard" (set to MACHINE_SYNC_NTSCOLD)
action:		N/A

c64/psid.c:
-----------
command line:	-paln
description:	"Use PAL-N sync factor"
resource:		"MachineVideoStandard" (set to MACHINE_SYNC_PALN)
action:		N/A

c64/psid.c:
-----------
command line:	-keepenv
description:	"Override PSID settings for Video standard and SID model"
resource:		N/A
action:		cmdline_keepenv()

c64/psid.c:
-----------
command line:	-tune <number>
description:	"Specify PSID tune <number>"
resource:		N/A
action:		cmdline_psid_tune()

c64dtv/c64dtv-cmdline-options.c:
--------------------------------
command line:	-pal
description:	"Use PAL sync factor"
resource:		"MachineVideoStandard" (set to MACHINE_SYNC_PAL)
action:		N/A

c64dtv/c64dtv-cmdline-options.c:
--------------------------------
command line:	-ntsc
description:	"Use NTSC sync factor"
resource:		"MachineVideoStandard" (set to MACHINE_SYNC_NTSC)
action:		N/A

c64dtv/c64dtv-cmdline-options.c:
--------------------------------
command line:	-kernal <Name>
description:	"Specify name of Kernal ROM image"
resource:		"KernalName"
action:		N/A

c64dtv/c64dtv-cmdline-options.c:
--------------------------------
command line:	-basic <Name>
description:	"Specify name of BASIC ROM image"
resource:		"BasicName"
action:		N/A

c64dtv/c64dtv-cmdline-options.c:
--------------------------------
command line:	-chargen <Name>
description:	"Specify name of character generator ROM image"
resource:		"ChargenName"
action:		N/A

c64dtv/c64dtv-cmdline-options.c:
--------------------------------
command line:	-kernalrev <Revision>
description:	"Patch the Kernal ROM to the specified <revision>"
resource:		"KernalRev"
action:		N/A

c64dtv/c64dtv-cmdline-options.c:
--------------------------------
command line:	-keymap <number>
description:	"Specify index of keymap file (0=sym, 1=symDE, 2=pos)"
resource:		"KeymapIndex"
action:		N/A

c64dtv/c64dtv-cmdline-options.c:
--------------------------------
command line:	-symkeymap <Name>
description:	"Specify name of symbolic keymap file"
resource:		"KeymapSymFile"
action:		N/A

c64dtv/c64dtv-cmdline-options.c:
--------------------------------
command line:	-symdekeymap <Name>
description:	"Specify name of symbolic German keymap file"
resource:		"KeymapSymDeFile"
action:		N/A

c64dtv/c64dtv-cmdline-options.c:
--------------------------------
command line:	-poskeymap <Name>
description:	"Specify name of positional keymap file"
resource:		"KeymapPosFile"
action:		N/A

c64dtv/c64dtv-cmdline-options.c:
--------------------------------
command line:	-model <Model>
description:	"Set DTV model (v2/v2pal/v2ntsc, v3/v3pal/v3ntsc, hummer)"
resource:		N/A
action:		set_dtv_model() (sets "MachineVideoStandard", "DtvRevision" and "HummerADC")

c64dtv/c64dtv-cmdline-options.c:
--------------------------------
command line:	-hummeradc
description:	"Enable Hummer ADC"
resource:		"HummerADC" (set to 1)
action:		N/A

c64dtv/c64dtv-cmdline-options.c:
--------------------------------
command line:	+hummeradc
description:	"Disable Hummer ADC"
resource:		"HummerADC" (set to 0)
action:		N/A

c64dtv/c64dtvblitter.c:
-----------------------
command line:	-dtvrev <Revision>
description:	"Specify DTV Revision (2: DTV2, 3: DTV3)"
resource:		"DtvRevision"
action:		N/A

c64dtv/c64dtvblitter.c:
-----------------------
command line:	-dtvblitterlog
description:	"Enable DTV blitter logs."
resource:		"DtvBlitterLog" (set to 1)
action:		N/A
fixme: is a debug option imo

c64dtv/c64dtvblitter.c:
-----------------------
command line:	+dtvblitterlog
description:	"Disable DTV blitter logs."
resource:		"DtvBlitterLog" (set to 0)
action:		N/A
fixme: is a debug option imo

c64dtv/c64dtvdma.c:
-------------------
command line:	-dtvdmalog
description:	"Enable DTV DMA logs."
resource:		"DtvDMALog" (set to 1)
action:		N/A
fixme: is a debug option imo

c64dtv/c64dtvdma.c:
-------------------
command line:	+dtvdmalog
description:	"Disable DTV DMA logs."
resource:		"DtvDMALog" (set to 0)
action:		N/A
fixme: is a debug option imo

c64dtv/c64dtvflash.c:
---------------------
command line:	-c64dtvromimage <Name>
description:	"Specify name of C64DTV ROM image"
resource:		"c64dtvromfilename"
action:		N/A

c64dtv/c64dtvflash.c:
---------------------
command line:	-c64dtvromrw
description:	"Enable writes to C64DTV ROM image"
resource:		"c64dtvromrw" (set to 1)
action:		N/A

c64dtv/c64dtvflash.c:
---------------------
command line:	+c64dtvromrw
description:	"Disable writes to C64DTV ROM image"
resource:		"c64dtvromrw" (set to 0)
action:		N/A

c64dtv/c64dtvflash.c:
---------------------
command line:	-dtvflashlog
description:	"Enable DTV flash chip logs."
resource:		"DtvFlashLog" (set to 1)
action:		N/A
fixme: is a debug option imo

c64dtv/c64dtvflash.c:
---------------------
command line:	+dtvflashlog
description:	"Disable DTV flash chip logs."
resource:		"DtvFlashLog" (set to 0)
action:		N/A
fixme: is a debug option imo

c64dtv/flash-trap.c:
--------------------
command line:	-fsflash <Name>
description:	"Use <name> as directory for flash file system device"
resource:		"FSFlashDir"
action:		N/A

c64dtv/flash-trap.c:
--------------------
command line:	-trueflashfs
description:	"Enable true hardware flash file system"
resource:		"FlashTrueFS" (set to 1)
action:		N/A

c64dtv/flash-trap.c:
--------------------
command line:	+trueflashfs
description:	"Disable true hardware flash file system"
resource:		"FlashTrueFS" (set to 0)
action:		N/A

cbm2/cbm2-cmdline-options.c:
----------------------------
command line:	-pal
description:	"Use PAL sync factor"
resource:		"MachineVideoStandard" (set to MACHINE_SYNC_PAL)
action:		N/A

cbm2/cbm2-cmdline-options.c:
----------------------------
command line:	-ntsc
description:	"Use NTSC sync factor"
resource:		"MachineVideoStandard" (set to MACHINE_SYNC_NTSC)
action:		N/A

cbm2/cbm2-cmdline-options.c:
----------------------------
command line:	-model <modelnumber>
description:	"Specify CBM-II model to emulate" (fixme: needs better description)
resource:		N/A
action:		cbm2_set_model() (sets "ModelLine", "MachineVideoStandard", "RamSize", "KernalName", "BasicName" and "ChargenName")

cbm2/cbm2-cmdline-options.c:
----------------------------
command line:	-ramsize <RAM size>
description:	"Specify size of RAM (64/128/256/512/1024 kByte)"
resource:		"RamSize"
action:		N/A

cbm2/cbm2-cmdline-options.c:
----------------------------
command line:	-kernal <Name>
description:	"Specify name of Kernal ROM image"
resource:		"KernalName"
action:		N/A

cbm2/cbm2-cmdline-options.c:
----------------------------
command line:	-basic <Name>
description:	"Specify name of BASIC ROM image"
resource:		"BasicName"
action:		N/A

cbm2/cbm2-cmdline-options.c:
----------------------------
command line:	-chargen <Name>
description:	"Specify name of character generator ROM image"
resource:		"ChargenName"
action:		N/A

cbm2/cbm2-cmdline-options.c:
----------------------------
command line:	-ram08
description:	"Enable RAM mapping in $0800-$0FFF"
resource:		"Ram08" (set to 1)
action:		N/A

cbm2/cbm2-cmdline-options.c:
----------------------------
command line:	+ram08
description:	"Disable RAM mapping in $0800-$0FFF"
resource:		"Ram08" (set to 0)
action:		N/A

cbm2/cbm2-cmdline-options.c:
----------------------------
command line:	-ram1
description:	"Enable RAM mapping in $1000-$1FFF"
resource:		"Ram1" (set to 1)
action:		N/A

cbm2/cbm2-cmdline-options.c:
----------------------------
command line:	+ram1
description:	"Disable RAM mapping in $1000-$1FFF"
resource:		"Ram1" (set to 0)
action:		N/A

cbm2/cbm2-cmdline-options.c:
----------------------------
command line:	-ram2
description:	"Enable RAM mapping in $2000-$3FFF"
resource:		"Ram2" (set to 1)
action:		N/A

cbm2/cbm2-cmdline-options.c:
----------------------------
command line:	+ram2
description:	"Disable RAM mapping in $2000-$3FFF"
resource:		"Ram2" (set to 0)
action:		N/A

cbm2/cbm2-cmdline-options.c:
----------------------------
command line:	-ram4
description:	"Enable RAM mapping in $4000-$5FFF"
resource:		"Ram4" (set to 1)
action:		N/A

cbm2/cbm2-cmdline-options.c:
----------------------------
command line:	+ram4
description:	"Disable RAM mapping in $4000-$5FFF"
resource:		"Ram4" (set to 0)
action:		N/A

cbm2/cbm2-cmdline-options.c:
----------------------------
command line:	-ram6
description:	"Enable RAM mapping in $6000-$7FFF"
resource:		"Ram6" (set to 1)
action:		N/A

cbm2/cbm2-cmdline-options.c:
----------------------------
command line:	+ram6
description:	"Disable RAM mapping in $6000-$7FFF"
resource:		"Ram6" (set to 0)
action:		N/A

cbm2/cbm2-cmdline-options.c:
----------------------------
command line:	-ramC
description:	"Enable RAM mapping in $C000-$CFFF"
resource:		"RamC" (set to 1)
action:		N/A

cbm2/cbm2-cmdline-options.c:
----------------------------
command line:	+ramC
description:	"Disable RAM mapping in $C000-$CFFF"
resource:		"RamC" (set to 0)
action:		N/A

cbm2/cbm2-cmdline-options.c:
----------------------------
command line:	-keymap <number>
description:	"Specify index of keymap file" (fixme: needs better description)
resource:		"KeymapIndex"
action:		N/A

cbm2/cbm2-cmdline-options.c:
----------------------------
command line:	-grsymkeymap <Name>
description:	"Specify name of graphics keyboard symbolic keymap file"
resource:		"KeymapGraphicsSymFile"
action:		N/A

cbm2/cbm2-cmdline-options.c:
----------------------------
command line:	-grposkeymap <Name>
description:	"Specify name of graphics keyboard positional keymap file"
resource:		"KeymapGraphicsPosFile"
action:		N/A

cbm2/cbm2-cmdline-options.c:
----------------------------
command line:	-buksymkeymap <Name>
description:	"Specify name of UK business keyboard symbolic keymap file"
resource:		"KeymapBusinessUKSymFile"
action:		N/A

cbm2/cbm2-cmdline-options.c:
----------------------------
command line:	-bukposkeymap <Name>
description:	"Specify name of UK business keyboard positional keymap file"
resource:		"KeymapBusinessUKPosFile"
action:		N/A

cbm2/cbm2-cmdline-options.c:
----------------------------
command line:	-bdesymkeymap <Name>
description:	"Specify name of German business keyboard symbolic keymap file"
resource:		"KeymapBusinessDESymFile"
action:		N/A

cbm2/cbm2-cmdline-options.c:
----------------------------
command line:	-bdeposkeymap <Name>
description:	"Specify name of German business keyboard positional keymap file"
resource:		"KeymapBusinessDEPosFile"
action:		N/A

cbm2/cbm2-cmdline-options.c:
----------------------------
command line:	-cia1model <Model>
description:	"Set CIA 1 model (0 = old 6526, 1 = new 6526A)"
resource:		"CIA1Model"
action:		N/A

cbm2/cbm2cart.c:
----------------
command line:	-cartreset
description:	"Reset machine if a cartridge is attached or detached"
resource:		"CartridgeReset" (set to 1)
action:		N/A

cbm2/cbm2cart.c:
----------------
command line:	+cartreset
description:	"Do not reset machine if a cartridge is attached or detached"
resource:		"CartridgeReset" (set to 0)
action:		N/A

cbm2/cbm2cart.c:
----------------
command line:	+cart
description:	"Disable default cartridge"
resource:		N/A
action:		cart_attach_cmdline() (fixme: research what resources are used)

cbm2/cbm2cart.c:
----------------
command line:	-cart1 <Name>
description:	"Specify name of cartridge ROM image for $1000"
resource:		"Cart1Name"
action:		N/A

cbm2/cbm2cart.c:
----------------
command line:	-cart2 <Name>
description:	"Specify name of cartridge ROM image for $2000-$3fff"
resource:		"Cart2Name"
action:		N/A

cbm2/cbm2cart.c:
----------------
command line:	-cart4 <Name>
description:	"Specify name of cartridge ROM image for $4000-$5fff"
resource:		"Cart4Name"
action:		N/A

cbm2/cbm2cart.c:
----------------
command line:	-cart6 <Name>
description:	"Specify name of cartridge ROM image for $6000-$7fff"
resource:		"Cart6Name"
action:		N/A

crtc/crtc-cmdline-options.c:
----------------------------
command line:	-CRTCstretchvertical
description:	"Enable additional vertical stretching."
resource:		"CrtcStretchVertical" (set to 1)
action:		N/A

crtc/crtc-cmdline-options.c:
----------------------------
command line:	+CRTCstretchvertical
description:	"Disable additional vertical stretching."
resource:		"CrtcStretchVertical" (set to 0)
action:		N/A

crtc/crtc-cmdline-options.c:
----------------------------
command line:	-CRTCvcache
description:	"Enable the video cache"
resource:		"CRTCVideoCache" (set to 1)
action:		N/A

crtc/crtc-cmdline-options.c:
----------------------------
command line:	+CRTCvcache
description:	"Disable the video cache"
resource:		"CRTCVideoCache" (set to 0)
action:		N/A

crtc/crtc-cmdline-options.c:
----------------------------
command line:	-CRTCdsize
description:	"Enable double size"
resource:		"CRTCDoubleSize" (set to 1)
action:		N/A

crtc/crtc-cmdline-options.c:
----------------------------
command line:	+CRTCdsize
description:	"Disable double size"
resource:		"CRTCDoubleSize" (set to 0)
action:		N/A

crtc/crtc-cmdline-options.c:
----------------------------
command line:	-CRTCdscan
description:	"Enable double scan"
resource:		"CRTCDoubleScan" (set to 1)
action:		N/A

crtc/crtc-cmdline-options.c:
----------------------------
command line:	+CRTCdscan
description:	"Disable double scan"
resource:		"CRTCDoubleScan" (set to 0)
action:		N/A

crtc/crtc-cmdline-options.c:
----------------------------
command line:	-CRTCaudioleak
description:	"Enable audio leak emulation"
resource:		"CRTCAudioLeak" (set to 1)
action:		N/A

crtc/crtc-cmdline-options.c:
----------------------------
command line:	+CRTCaudioleak
description:	"Disable audio leak emulation"
resource:		"CRTCAudioLeak" (set to 0)
action:		N/A

crtc/crtc-cmdline-options.c:
----------------------------
command line:	-CRTChwscale
description:	"Enable hardware scaling"
resource:		"CRTCHwScale" (set to 1)
action:		N/A

crtc/crtc-cmdline-options.c:
----------------------------
command line:	+CRTChwscale
description:	"Disable hardware scaling"
resource:		"CRTCHwScale" (set to 0)
action:		N/A

crtc/crtc-cmdline-options.c:
----------------------------
command line:	-CRTCfilter <Mode>
description:	"Select rendering filter: (0: none, 1: CRT emulation, 2: scale2x)"
resource:		"CRTCFilter"
action:		N/A

crtc/crtc-cmdline-options.c:
----------------------------
command line:	-CRTCintpal
description:	"Use an internal calculated palette"
resource:		"CRTCExternalPalette" (set to 0)
action:		N/A

crtc/crtc-cmdline-options.c:
----------------------------
command line:	-CRTCextpal
description:	"Use an external palette (file)"
resource:		"CRTCExternalPalette" (set to 1)
action:		N/A

crtc/crtc-cmdline-options.c:
----------------------------
command line:	-CRTCpalette <Name>
description:	"Specify name of file of external palette"
resource:		"CRTCPaletteFile"
action:		N/A

crtc/crtc-cmdline-options.c:
----------------------------
command line:	-CRTCfull
description:	"Enable fullscreen"
resource:		"CRTCFullscreen" (set to 1)
action:		N/A

crtc/crtc-cmdline-options.c:
----------------------------
command line:	+CRTCfull
description:	"Disable fullscreen"
resource:		"CRTCFullscreen" (set to 0)
action:		N/A

crtc/crtc-cmdline-options.c:
----------------------------
command line:	-CRTCfulldevice <device>
description:	"Select fullscreen device"
resource:		"CRTCFullscreenDevice"
action:		N/A

crtc/crtc-cmdline-options.c:
----------------------------
command line:	-CRTCSDLfullmode <Mode>
description:	"Select fullscreen mode"
resource:		"CRTCSDLFullscreenMode"
action:		N/A

crtc/crtc-cmdline-options.c:
----------------------------
command line:	-CRTCXRANDRfullmode <Mode>
description:	"Select fullscreen mode"
resource:		"CRTCXRANDRFullscreenMode"
action:		N/A

crtc/crtc-cmdline-options.c:
----------------------------
command line:	-CRTCVidmodefullmode <Mode>
description:	"Select fullscreen mode"
resource:		"CRTCVidmodeFullscreenMode"
action:		N/A

crtc/crtc-cmdline-options.c:
----------------------------
command line:	-CRTCsaturation <0-2000>
description:	"Set saturation of internal calculated palette [1000]"
resource:		"CRTCColorSaturation"
action:		N/A

crtc/crtc-cmdline-options.c:
----------------------------
command line:	-CRTCcontrast <0-2000>
description:	"Set contrast of internal calculated palette [1000]"
resource:		"CRTCColorContrast"
action:		N/A

crtc/crtc-cmdline-options.c:
----------------------------
command line:	-CRTCbrightness <0-2000>
description:	"Set brightness of internal calculated palette [1000]"
resource:		"CRTCColorBrightness"
action:		N/A

crtc/crtc-cmdline-options.c:
----------------------------
command line:	-CRTCgamma <0-4000>
description:	"Set gamma of internal calculated palette [2200]"
resource:		"CRTCColorGamma"
action:		N/A

crtc/crtc-cmdline-options.c:
----------------------------
command line:	-CRTCtint <0-2000>
description:	"Set tint of internal calculated palette [1000]"
resource:		"CRTCColorTint"
action:		N/A

crtc/crtc-cmdline-options.c:
----------------------------
command line:	-CRTCcrtblur <0-1000>
description:	"Amount of horizontal blur for the CRT emulation. [500]"
resource:		"CRTCPALBlur"
action:		N/A

crtc/crtc-cmdline-options.c:
----------------------------
command line:	-CRTCcrtscanlineshade <0-1000>
description:	"Amount of scan line shading for the CRT emulation [667]"
resource:		"CRTCPALScanLineShade"
action:		N/A

crtc/crtc-cmdline-options.c:
----------------------------
command line:	-CRTCoddlinesphase <0-2000>
description:	"Set phase for color carrier in odd lines [1250]"
resource:		"CRTCPALOddLinePhase"
action:		N/A

crtc/crtc-cmdline-options.c:
----------------------------
command line:	-CRTCoddlinesoffset <0-2000>
description:	"Set phase offset for color carrier in odd lines [750]"
resource:		"CRTCPALOddLineOffset"
action:		N/A

datasette.c:
------------
command line:	-dsresetwithcpu
description:	"Enable automatic Datasette-Reset"
resource:		"DatasetteResetWithCPU" (set to 1)
action:		N/A

datasette.c:
------------
command line:	+dsresetwithcpu
description:	"Disable automatic Datasette-Reset"
resource:		"DatasetteResetWithCPU" (set to 0)
action:		N/A

datasette.c:
------------
command line:	-dszerogapdelay <value>
description:	"Set delay in cycles for a zero in the tap"
resource:		"DatasetteZeroGapDelay"
action:		N/A

datasette.c:
------------
command line:	-dsspeedtuning <value>
description:	"Set number of cycles added to each gap in the tap"
resource:		"DatasetteSpeedTuning"
action:		N/A

debug.c:
--------
command line:	-trace_maincpu
description:	"Trace the main CPU"
resource:		"MainCPU_TRACE" (set to 1)
action:		N/A

debug.c:
--------
command line:	+trace_maincpu
description:	"Do not trace the main CPU"
resource:		"MainCPU_TRACE" (set to 0)
action:		N/A

debug.c:
--------
command line:	-trace_drive0
description:	"Trace the drive0 CPU"
resource:		"Drive0CPU_TRACE" (set to 1)
action:		N/A

debug.c:
--------
command line:	+trace_drive0
description:	"Do not trace the drive0 CPU"
resource:		"Drive0CPU_TRACE" (set to 0)
action:		N/A

debug.c:
--------
command line:	-trace_drive1
description:	"Trace the drive1 CPU"
resource:		"Drive1CPU_TRACE" (set to 1)
action:		N/A

debug.c:
--------
command line:	+trace_drive1
description:	"Do not trace the drive1 CPU"
resource:		"Drive1CPU_TRACE" (set to 0)
action:		N/A

debug.c:
--------
command line:	-trace_drive2
description:	"Trace the drive2 CPU"
resource:		"Drive2CPU_TRACE" (set to 1)
action:		N/A

debug.c:
--------
command line:	+trace_drive2
description:	"Do not trace the drive2 CPU"
resource:		"Drive2CPU_TRACE" (set to 0)
action:		N/A

debug.c:
--------
command line:	-trace_drive3
description:	"Trace the drive3 CPU"
resource:		"Drive3CPU_TRACE" (set to 1)
action:		N/A

debug.c:
--------
command line:	+trace_drive3
description:	"Do not trace the drive3 CPU"
resource:		"Drive3CPU_TRACE" (set to 0)
action:		N/A

debug.c:
--------
command line:	-trace_mode <value>
description:	"Trace mode (0=normal 1=small 2=history)"
resource:		"TraceMode"
action:		N/A

drive/drive-cmdline-options.c:
------------------------------
command line:	-truedrive
description:	"Enable hardware-level emulation of disk drives"
resource:		"DriveTrueEmulation" (set to 1)
action:		N/A

drive/drive-cmdline-options.c:
------------------------------
command line:	+truedrive
description:	"Disable hardware-level emulation of disk drives"
resource:		"DriveTrueEmulation" (set to 0)
action:		N/A

drive/drive-cmdline-options.c:
------------------------------
command line:	-drivesound
description:	"Enable sound emulation of disk drives"
resource:		"DriveSoundEmulation" (set to 1)
action:		N/A

drive/drive-cmdline-options.c:
------------------------------
command line:	+drivesound
description:	"Disable sound emulation of disk drives"
resource:		"DriveSoundEmulation" (set to 0)
action:		N/A

drive/drive-cmdline-options.c:
------------------------------
command line:	-drivesoundvolume <Volume>
description:	"Set volume for disk drive sound emulation (0-4000)"
resource:		"DriveSoundEmulationVolume"
action:		N/A

drive/drive-cmdline-options.c:
------------------------------
command line:	-drive8type <Type>
description:	"Set drive type (0: no drive)" (fixme: needs better description)
resource:		"Drive8Type"
action:		N/A

drive/drive-cmdline-options.c:
------------------------------
command line:	-drive9type <Type>
description:	"Set drive type (0: no drive)" (fixme: needs better description)
resource:		"Drive9Type"
action:		N/A

drive/drive-cmdline-options.c:
------------------------------
command line:	-drive10type <Type>
description:	"Set drive type (0: no drive)" (fixme: needs better description)
resource:		"Drive10Type"
action:		N/A

drive/drive-cmdline-options.c:
------------------------------
command line:	-drive11type <Type>
description:	"Set drive type (0: no drive)" (fixme: needs better description)
resource:		"Drive11Type"
action:		N/A

drive/drive-cmdline-options.c:
------------------------------
command line:	-drive8extend <method>
description:	"Set drive 40 track extension policy (0: never, 1: ask, 2: on access)"
resource:		"Drive8ExtendImagePolicy"
action:		N/A

drive/drive-cmdline-options.c:
------------------------------
command line:	-drive9extend <method>
description:	"Set drive 40 track extension policy (0: never, 1: ask, 2: on access)"
resource:		"Drive9ExtendImagePolicy"
action:		N/A

drive/drive-cmdline-options.c:
------------------------------
command line:	-drive10extend <method>
description:	"Set drive 40 track extension policy (0: never, 1: ask, 2: on access)"
resource:		"Drive10ExtendImagePolicy"
action:		N/A

drive/drive-cmdline-options.c:
------------------------------
command line:	-drive11extend <method>
description:	"Set drive 40 track extension policy (0: never, 1: ask, 2: on access)"
resource:		"Drive11ExtendImagePolicy"
action:		N/A

drive/drive-cmdline-options.c:
------------------------------
command line:	-drive8idle <method>
description:	"Set drive idling method (0: no traps, 1: skip cycles, 2: trap idle)"
resource:		"Drive8IdleMethod"
action:		N/A

drive/drive-cmdline-options.c:
------------------------------
command line:	-drive9idle <method>
description:	"Set drive idling method (0: no traps, 1: skip cycles, 2: trap idle)"
resource:		"Drive9IdleMethod"
action:		N/A

drive/drive-cmdline-options.c:
------------------------------
command line:	-drive10idle <method>
description:	"Set drive idling method (0: no traps, 1: skip cycles, 2: trap idle)"
resource:		"Drive10IdleMethod"
action:		N/A

drive/drive-cmdline-options.c:
------------------------------
command line:	-drive11idle <method>
description:	"Set drive idling method (0: no traps, 1: skip cycles, 2: trap idle)"
resource:		"Drive11IdleMethod"
action:		N/A

drive/iec/c64exp/c64exp-cmdline-options.c:
------------------------------------------
command line:	-profdos1571 <Name>
description:	"Specify name of Professional DOS 1571 ROM image"
resource:		"DriveProfDOS1571Name"
action:		N/A

drive/iec/c64exp/c64exp-cmdline-options.c:
------------------------------------------
command line:	-supercard <Name>
description:	"Specify name of SuperCard+ ROM image"
resource:		"DriveSuperCardName"
action:		N/A

drive/iec/c64exp/c64exp-cmdline-options.c:
------------------------------------------
command line:	-parallel8 <Type>
description:	"Set parallel cable type (0: none, 1: standard, 2: Dolphin DOS 3, 3: Formel 64)"
resource:		"Drive8ParallelCable"
action:		N/A

drive/iec/c64exp/c64exp-cmdline-options.c:
------------------------------------------
command line:	-parallel9 <Type>
description:	"Set parallel cable type (0: none, 1: standard, 2: Dolphin DOS 3, 3: Formel 64)"
resource:		"Drive9ParallelCable"
action:		N/A

drive/iec/c64exp/c64exp-cmdline-options.c:
------------------------------------------
command line:	-parallel10 <Type>
description:	"Set parallel cable type (0: none, 1: standard, 2: Dolphin DOS 3, 3: Formel 64)"
resource:		"Drive10ParallelCable"
action:		N/A

drive/iec/c64exp/c64exp-cmdline-options.c:
------------------------------------------
command line:	-parallel11 <Type>
description:	"Set parallel cable type (0: none, 1: standard, 2: Dolphin DOS 3, 3: Formel 64)"
resource:		"Drive11ParallelCable"
action:		N/A

drive/iec/c64exp/c64exp-cmdline-options.c:
------------------------------------------
command line:	-drive8profdos
description:	"Enable Professional DOS"
resource:		"Drive8ProfDOS" (set to 1)
action:		N/A

drive/iec/c64exp/c64exp-cmdline-options.c:
------------------------------------------
command line:	+drive8profdos
description:	"Disable Professional DOS"
resource:		"Drive8ProfDOS" (set to 0)
action:		N/A

drive/iec/c64exp/c64exp-cmdline-options.c:
------------------------------------------
command line:	-drive9profdos
description:	"Enable Professional DOS"
resource:		"Drive9ProfDOS" (set to 1)
action:		N/A

drive/iec/c64exp/c64exp-cmdline-options.c:
------------------------------------------
command line:	+drive9profdos
description:	"Disable Professional DOS"
resource:		"Drive9ProfDOS" (set to 0)
action:		N/A

drive/iec/c64exp/c64exp-cmdline-options.c:
------------------------------------------
command line:	-drive10profdos
description:	"Enable Professional DOS"
resource:		"Drive10ProfDOS" (set to 1)
action:		N/A

drive/iec/c64exp/c64exp-cmdline-options.c:
------------------------------------------
command line:	+drive10profdos
description:	"Disable Professional DOS"
resource:		"Drive10ProfDOS" (set to 0)
action:		N/A

drive/iec/c64exp/c64exp-cmdline-options.c:
------------------------------------------
command line:	-drive11profdos
description:	"Enable Professional DOS"
resource:		"Drive11ProfDOS" (set to 1)
action:		N/A

drive/iec/c64exp/c64exp-cmdline-options.c:
------------------------------------------
command line:	+drive11profdos
description:	"Disable Professional DOS"
resource:		"Drive11ProfDOS" (set to 0)
action:		N/A

drive/iec/c64exp/c64exp-cmdline-options.c:
------------------------------------------
command line:	-drive8supercard
description:	"Enable SuperCard+"
resource:		"Drive8SuperCard" (set to 1)
action:		N/A

drive/iec/c64exp/c64exp-cmdline-options.c:
------------------------------------------
command line:	+drive8supercard
description:	"Disable SuperCard+"
resource:		"Drive8SuperCard" (set to 0)
action:		N/A

drive/iec/c64exp/c64exp-cmdline-options.c:
------------------------------------------
command line:	-drive9supercard
description:	"Enable SuperCard+"
resource:		"Drive9SuperCard" (set to 1)
action:		N/A

drive/iec/c64exp/c64exp-cmdline-options.c:
------------------------------------------
command line:	+drive9supercard
description:	"Disable SuperCard+"
resource:		"Drive9SuperCard" (set to 0)
action:		N/A

drive/iec/c64exp/c64exp-cmdline-options.c:
------------------------------------------
command line:	-drive10supercard
description:	"Enable SuperCard+"
resource:		"Drive10SuperCard" (set to 1)
action:		N/A

drive/iec/c64exp/c64exp-cmdline-options.c:
------------------------------------------
command line:	+drive10supercard
description:	"Disable SuperCard+"
resource:		"Drive10SuperCard" (set to 0)
action:		N/A

drive/iec/c64exp/c64exp-cmdline-options.c:
------------------------------------------
command line:	-drive11supercard
description:	"Enable SuperCard+"
resource:		"Drive11SuperCard" (set to 1)
action:		N/A

drive/iec/c64exp/c64exp-cmdline-options.c:
------------------------------------------
command line:	+drive11supercard
description:	"Disable SuperCard+"
resource:		"Drive11SuperCard" (set to 0)
action:		N/A

drive/iec/iec-cmdline-options.c:
--------------------------------
command line:	-dos1541 <Name>
description:	"Specify name of 1541 DOS ROM image"
resource:		"DosName1541"
action:		N/A

drive/iec/iec-cmdline-options.c:
--------------------------------
command line:	-dos1541II <Name>
description:	"Specify name of 1541-II DOS ROM image"
resource:		"DosName1541II"
action:		N/A

drive/iec/iec-cmdline-options.c:
--------------------------------
command line:	-dos1570 <Name>
description:	"Specify name of 1570 DOS ROM image"
resource:		"DosName1570"
action:		N/A

drive/iec/iec-cmdline-options.c:
--------------------------------
command line:	-dos1571 <Name>
description:	"Specify name of 1571 DOS ROM image"
resource:		"DosName1571"
action:		N/A

drive/iec/iec-cmdline-options.c:
--------------------------------
command line:	-dos1581 <Name>
description:	"Specify name of 1581 DOS ROM image"
resource:		"DosName1581"
action:		N/A

drive/iec/iec-cmdline-options.c:
--------------------------------
command line:	-dos2000 <Name>
description:	"Specify name of 2000 DOS ROM image"
resource:		"DosName2000"
action:		N/A

drive/iec/iec-cmdline-options.c:
--------------------------------
command line:	-dos4000 <Name>
description:	"Specify name of 4000 DOS ROM image"
resource:		"DosName4000"
action:		N/A

drive/iec/iec-cmdline-options.c:
--------------------------------
command line:	-drive8ram2000
description:	"Enable 8KB RAM expansion at $2000-$3FFF"
resource:		"Drive8RAM2000" (set to 1)
action:		N/A

drive/iec/iec-cmdline-options.c:
--------------------------------
command line:	+drive8ram2000
description:	"Disable 8KB RAM expansion at $2000-$3FFF"
resource:		"Drive8RAM2000" (set to 0)
action:		N/A

drive/iec/iec-cmdline-options.c:
--------------------------------
command line:	-drive9ram2000
description:	"Enable 8KB RAM expansion at $2000-$3FFF"
resource:		"Drive9RAM2000" (set to 1)
action:		N/A

drive/iec/iec-cmdline-options.c:
--------------------------------
command line:	+drive9ram2000
description:	"Disable 8KB RAM expansion at $2000-$3FFF"
resource:		"Drive9RAM2000" (set to 0)
action:		N/A

drive/iec/iec-cmdline-options.c:
--------------------------------
command line:	-drive10ram2000
description:	"Enable 8KB RAM expansion at $2000-$3FFF"
resource:		"Drive10RAM2000" (set to 1)
action:		N/A

drive/iec/iec-cmdline-options.c:
--------------------------------
command line:	+drive10ram2000
description:	"Disable 8KB RAM expansion at $2000-$3FFF"
resource:		"Drive10RAM2000" (set to 0)
action:		N/A

drive/iec/iec-cmdline-options.c:
--------------------------------
command line:	-drive11ram2000
description:	"Enable 8KB RAM expansion at $2000-$3FFF"
resource:		"Drive11RAM2000" (set to 1)
action:		N/A

drive/iec/iec-cmdline-options.c:
--------------------------------
command line:	+drive11ram2000
description:	"Disable 8KB RAM expansion at $2000-$3FFF"
resource:		"Drive11RAM2000" (set to 0)
action:		N/A

drive/iec/iec-cmdline-options.c:
--------------------------------
command line:	-drive8ram4000
description:	"Enable 8KB RAM expansion at $4000-$5FFF"
resource:		"Drive8RAM4000" (set to 1)
action:		N/A

drive/iec/iec-cmdline-options.c:
--------------------------------
command line:	+drive8ram4000
description:	"Disable 8KB RAM expansion at $4000-$5FFF"
resource:		"Drive8RAM4000" (set to 0)
action:		N/A

drive/iec/iec-cmdline-options.c:
--------------------------------
command line:	-drive9ram4000
description:	"Enable 8KB RAM expansion at $4000-$5FFF"
resource:		"Drive9RAM4000" (set to 1)
action:		N/A

drive/iec/iec-cmdline-options.c:
--------------------------------
command line:	+drive9ram4000
description:	"Disable 8KB RAM expansion at $4000-$5FFF"
resource:		"Drive9RAM4000" (set to 0)
action:		N/A

drive/iec/iec-cmdline-options.c:
--------------------------------
command line:	-drive10ram4000
description:	"Enable 8KB RAM expansion at $4000-$5FFF"
resource:		"Drive10RAM4000" (set to 1)
action:		N/A

drive/iec/iec-cmdline-options.c:
--------------------------------
command line:	+drive10ram4000
description:	"Disable 8KB RAM expansion at $4000-$5FFF"
resource:		"Drive10RAM4000" (set to 0)
action:		N/A

drive/iec/iec-cmdline-options.c:
--------------------------------
command line:	-drive11ram4000
description:	"Enable 8KB RAM expansion at $4000-$5FFF"
resource:		"Drive11RAM4000" (set to 1)
action:		N/A

drive/iec/iec-cmdline-options.c:
--------------------------------
command line:	+drive11ram4000
description:	"Disable 8KB RAM expansion at $4000-$5FFF"
resource:		"Drive11RAM4000" (set to 0)
action:		N/A

drive/iec/iec-cmdline-options.c:
--------------------------------
command line:	-drive8ram6000
description:	"Enable 8KB RAM expansion at $6000-$7FFF"
resource:		"Drive8RAM6000" (set to 1)
action:		N/A

drive/iec/iec-cmdline-options.c:
--------------------------------
command line:	+drive8ram6000
description:	"Disable 8KB RAM expansion at $6000-$7FFF"
resource:		"Drive8RAM6000" (set to 0)
action:		N/A

drive/iec/iec-cmdline-options.c:
--------------------------------
command line:	-drive9ram6000
description:	"Enable 8KB RAM expansion at $6000-$7FFF"
resource:		"Drive9RAM6000" (set to 1)
action:		N/A

drive/iec/iec-cmdline-options.c:
--------------------------------
command line:	+drive9ram6000
description:	"Disable 8KB RAM expansion at $6000-$7FFF"
resource:		"Drive9RAM6000" (set to 0)
action:		N/A

drive/iec/iec-cmdline-options.c:
--------------------------------
command line:	-drive10ram6000
description:	"Enable 8KB RAM expansion at $6000-$7FFF"
resource:		"Drive10RAM6000" (set to 1)
action:		N/A

drive/iec/iec-cmdline-options.c:
--------------------------------
command line:	+drive10ram6000
description:	"Disable 8KB RAM expansion at $6000-$7FFF"
resource:		"Drive10RAM6000" (set to 0)
action:		N/A

drive/iec/iec-cmdline-options.c:
--------------------------------
command line:	-drive11ram6000
description:	"Enable 8KB RAM expansion at $6000-$7FFF"
resource:		"Drive11RAM6000" (set to 1)
action:		N/A

drive/iec/iec-cmdline-options.c:
--------------------------------
command line:	+drive11ram6000
description:	"Disable 8KB RAM expansion at $6000-$7FFF"
resource:		"Drive11RAM6000" (set to 0)
action:		N/A

drive/iec/iec-cmdline-options.c:
--------------------------------
command line:	-drive8ram8000
description:	"Enable 8KB RAM expansion at $8000-$9FFF"
resource:		"Drive8RAM8000" (set to 1)
action:		N/A

drive/iec/iec-cmdline-options.c:
--------------------------------
command line:	+drive8ram8000
description:	"Disable 8KB RAM expansion at $8000-$9FFF"
resource:		"Drive8RAM8000" (set to 0)
action:		N/A

drive/iec/iec-cmdline-options.c:
--------------------------------
command line:	-drive9ram8000
description:	"Enable 8KB RAM expansion at $8000-$9FFF"
resource:		"Drive9RAM8000" (set to 1)
action:		N/A

drive/iec/iec-cmdline-options.c:
--------------------------------
command line:	+drive9ram8000
description:	"Disable 8KB RAM expansion at $8000-$9FFF"
resource:		"Drive9RAM8000" (set to 0)
action:		N/A

drive/iec/iec-cmdline-options.c:
--------------------------------
command line:	-drive10ram8000
description:	"Enable 8KB RAM expansion at $8000-$9FFF"
resource:		"Drive10RAM8000" (set to 1)
action:		N/A

drive/iec/iec-cmdline-options.c:
--------------------------------
command line:	+drive10ram8000
description:	"Disable 8KB RAM expansion at $8000-$9FFF"
resource:		"Drive10RAM8000" (set to 0)
action:		N/A

drive/iec/iec-cmdline-options.c:
--------------------------------
command line:	-drive11ram8000
description:	"Enable 8KB RAM expansion at $8000-$9FFF"
resource:		"Drive11RAM8000" (set to 1)
action:		N/A

drive/iec/iec-cmdline-options.c:
--------------------------------
command line:	+drive11ram8000
description:	"Disable 8KB RAM expansion at $8000-$9FFF"
resource:		"Drive11RAM8000" (set to 0)
action:		N/A

drive/iec/iec-cmdline-options.c:
--------------------------------
command line:	-drive8rama000
description:	"Enable 8KB RAM expansion at $A000-$BFFF"
resource:		"Drive8RAMA000" (set to 1)
action:		N/A

drive/iec/iec-cmdline-options.c:
--------------------------------
command line:	+drive8rama000
description:	"Disable 8KB RAM expansion at $A000-$BFFF"
resource:		"Drive8RAMA000" (set to 0)
action:		N/A

drive/iec/iec-cmdline-options.c:
--------------------------------
command line:	-drive9rama000
description:	"Enable 8KB RAM expansion at $A000-$BFFF"
resource:		"Drive9RAMA000" (set to 1)
action:		N/A

drive/iec/iec-cmdline-options.c:
--------------------------------
command line:	+drive9rama000
description:	"Disable 8KB RAM expansion at $A000-$BFFF"
resource:		"Drive9RAMA000" (set to 0)
action:		N/A

drive/iec/iec-cmdline-options.c:
--------------------------------
command line:	-drive10rama000
description:	"Enable 8KB RAM expansion at $A000-$BFFF"
resource:		"Drive10RAMA000" (set to 1)
action:		N/A

drive/iec/iec-cmdline-options.c:
--------------------------------
command line:	+drive10rama000
description:	"Disable 8KB RAM expansion at $A000-$BFFF"
resource:		"Drive10RAMA000" (set to 0)
action:		N/A

drive/iec/iec-cmdline-options.c:
--------------------------------
command line:	-drive11rama000
description:	"Enable 8KB RAM expansion at $A000-$BFFF"
resource:		"Drive11RAMA000" (set to 1)
action:		N/A

drive/iec/iec-cmdline-options.c:
--------------------------------
command line:	+drive11rama000
description:	"Disable 8KB RAM expansion at $A000-$BFFF"
resource:		"Drive11RAMA000" (set to 0)
action:		N/A

drive/iec/plus4exp/plus4exp-cmdline-options.c:
----------------------------------------------
command line:	-parallel8 <Type>
description:	"Set parallel cable type (0: none, 1: standard)"
resource:		"Drive8ParallelCable"
action:		N/A

drive/iec/plus4exp/plus4exp-cmdline-options.c:
----------------------------------------------
command line:	-parallel9 <Type>
description:	"Set parallel cable type (0: none, 1: standard)"
resource:		"Drive9ParallelCable"
action:		N/A

drive/iec/plus4exp/plus4exp-cmdline-options.c:
----------------------------------------------
command line:	-parallel10 <Type>
description:	"Set parallel cable type (0: none, 1: standard)"
resource:		"Drive10ParallelCable"
action:		N/A

drive/iec/plus4exp/plus4exp-cmdline-options.c:
----------------------------------------------
command line:	-parallel11 <Type>
description:	"Set parallel cable type (0: none, 1: standard)"
resource:		"Drive11ParallelCable"
action:		N/A

drive/iec128dcr/iec128dcr-cmdline-options.c:
--------------------------------------------
command line:	-dos1571cr <Name>
description:	"Specify name of 1571CR DOS ROM image"
resource:		"DosName1571cr"
action:		N/A

drive/ieee/ieee-cmdline-options.c:
----------------------------------
command line:	-dos2031 <Name>
description:	"Specify name of 2031 DOS ROM image"
resource:		"DosName2031"
action:		N/A

drive/ieee/ieee-cmdline-options.c:
----------------------------------
command line:	-dos2040 <Name>
description:	"Specify name of 2040 DOS ROM image"
resource:		"DosName2040"
action:		N/A

drive/ieee/ieee-cmdline-options.c:
----------------------------------
command line:	-dos3040 <Name>
description:	"Specify name of 3040 DOS ROM image"
resource:		"DosName3040"
action:		N/A

drive/ieee/ieee-cmdline-options.c:
----------------------------------
command line:	-dos4040 <Name>
description:	"Specify name of 4040 DOS ROM image"
resource:		"DosName4040"
action:		N/A

drive/ieee/ieee-cmdline-options.c:
----------------------------------
command line:	-dos1001 <Name>
description:	"Specify name of 1001/8050/8250 DOS ROM image"
resource:		"DosName1001"
action:		N/A

drive/tcbm/tcbm-cmdline-options.c:
----------------------------------
command line:	-dos1551 <Name>
description:	"Specify name of 1551 DOS ROM image"
resource:		"DosName1551"
action:		N/A

event.c:
--------
command line:	-playback
description:	"Playback recorded events"
resource:		N/A
action:		cmdline_help()

fliplist.c:
-----------
command line:	-flipname <Name>
description:	"Specify name of the flip list file image"
resource:		"FliplistName"
action:		N/A

fsdevice/fsdevice-cmdline-options.c:
------------------------------------
command line:	-fs8 <Name>
description:	"Use <name> as directory for file system device #8"
resource:		N/A
action:		cmdline_fsdirectory() (sets "FSDevice8Dir")

fsdevice/fsdevice-cmdline-options.c:
------------------------------------
command line:	-fs9 <Name>
description:	"Use <name> as directory for file system device #9"
resource:		N/A
action:		cmdline_fsdirectory() (sets "FSDevice9Dir")

fsdevice/fsdevice-cmdline-options.c:
------------------------------------
command line:	-fs10 <Name>
description:	"Use <name> as directory for file system device #10"
resource:		N/A
action:		cmdline_fsdirectory() (sets "FSDevice10Dir")

fsdevice/fsdevice-cmdline-options.c:
------------------------------------
command line:	-fs11 <Name>
description:	"Use <name> as directory for file system device #11"
resource:		N/A
action:		cmdline_fsdirectory() (sets "FSDevice11Dir")

gfxoutputdrv/doodledrv.c:
-------------------------
command line:	-doodleoversize <method>
description:	"Select the way the oversized input should be handled, (0: scale down, 1: crop left top, 2: crop center top,  3: crop right top, 4: crop left center, 5: crop center, 6: crop right center, 7: crop left bottom, 8: crop center bottom, 9:  crop right bottom)"
resource:		"DoodleOversizeHandling"
action:		N/A

gfxoutputdrv/doodledrv.c:
-------------------------
command line:	-doodleundersize <method>
description:	"Select the way the undersized input should be handled, (0: scale up, 1: borderize)"
resource:		"DoodleUndersizeHandling"
action:		N/A

gfxoutputdrv/doodledrv.c:
-------------------------
command line:	-doodlemc <method>
description:	"Select the way the multicolor to hires should be handled, (0: b&w, 1: 2 colors, 2: 4 colors, 3: gray scale,  4: best cell colors)"
resource:		"DoodleMultiColorHandling"
action:		N/A

gfxoutputdrv/doodledrv.c:
-------------------------
command line:	-doodletedlum <method>
description:	"Select the way the TED luminosity should be handled, (0: ignore, 1: dither)"
resource:		"DoodleTEDLumHandling"
action:		N/A

gfxoutputdrv/doodledrv.c:
-------------------------
command line:	-doodlecrtctextcolor <color>
description:	"Select the CRTC text color (0: white, 1: amber, 2: green)"
resource:		"DoodleCRTCTextColor"
action:		N/A

gfxoutputdrv/ffmpegdrv.c:
-------------------------
command line:	-ffmpegaudiobitrate <value>
description:	"Set bitrate for audio stream in media file"
resource:		"FFMPEGAudioBitrate"
action:		N/A

gfxoutputdrv/ffmpegdrv.c:
-------------------------
command line:	-ffmpegvideobitrate <value>
description:	"Set bitrate for video stream in media file"
resource:		"FFMPEGVideoBitrate"
action:		N/A

gfxoutputdrv/koaladrv.c:
------------------------
command line:	-koalaoversize <method>
description:	"Select the way the oversized input should be handled, (0: scale down, 1: crop left top, 2: crop center top,  3: crop right top, 4: crop left center, 5: crop center, 6: crop right center, 7: crop left bottom, 8: crop center bottom, 9:  crop right bottom)"
resource:		"KoalaOversizeHandling"
action:		N/A

gfxoutputdrv/koaladrv.c:
------------------------
command line:	-koalaundersize <method>
description:	"Select the way the undersized input should be handled, (0: scale up, 1: borderize)"
resource:		"KoalaUndersizeHandling"
action:		N/A

gfxoutputdrv/koaladrv.c:
------------------------
command line:	-koalatedlum <method>
description:	"Select the way the TED luminosity should be handled, (0: ignore, 1: dither)"
resource:		"KoalaTEDLumHandling"
action:		N/A

gfxoutputdrv/koaladrv.c:
------------------------
command line:	-koalacrtctextcolor <color>
description:	"Select the CRTC text color (0: white, 1: amber, 2: green)"
resource:		"KoalaCRTCTextColor"
action:		N/A

gfxoutputdrv/quicktimedrv.c:
----------------------------
command line:	-quicktimeaudiobitrate <value>
description:	"Set bitrate for audio stream in media file"
resource:		"QuickTimeAudioBitrate"
action:		N/A

gfxoutputdrv/quicktimedrv.c:
----------------------------
command line:	-quicktimevideobitrate <value>
description:	"Set bitrate for video stream in media file"
resource:		"QuickTimeVideoBitrate"
action:		N/A

initcmdline.c:
--------------
command line:	-help
description:	"Show a list of the available options and exit normally"
resource:		N/A
action:		cmdline_help()

initcmdline.c:
--------------
command line:	-?
description:	"Show a list of the available options and exit normally"
resource:		N/A
action:		cmdline_help()

initcmdline.c:
--------------
command line:	-h
description:	"Show a list of the available options and exit normally"
resource:		N/A
action:		cmdline_help()

initcmdline.c:
--------------
command line:	-default
description:	"Restore default settings"
resource:		N/A
action:		cmdline_default() (sets all resources to the default)

initcmdline.c:
--------------
command line:	-config <filename>
description:	"Specify config file"
resource:		N/A
action:		cmdline_config()

initcmdline.c:
--------------
command line:	-chdir <Directory>
description:	"Change current working directory."
resource:		N/A
action:		cmdline_chdir()

initcmdline.c:
--------------
command line:	-limitcycles <value>
description:	"Specify number of cycles to run before quitting with an error."
resource:		N/A
action:		cmdline_limitcycles()

initcmdline.c:
--------------
command line:	-console
description:	"Console mode (for music playback)" (fixme: we have vsid for music playback)
resource:		N/A
action:		cmdline_console()

initcmdline.c:
--------------
command line:	-core
description:	"Allow production of core dumps"
resource:		"DoCoreDump" (set to 1)
action:		N/A

initcmdline.c:
--------------
command line:	+core
description:	"Do not produce core dumps"
resource:		"DoCoreDump" (set to 0)
action:		N/A

initcmdline.c:
--------------
command line:	-debug
description:	"Don't call exception handler"
resource:		"DoCoreDump" (set to 1)
action:		N/A

initcmdline.c:
--------------
command line:	+debug
description:	"Call exception handler (default)"
resource:		"DoCoreDump" (set to 0)
action:		N/A

initcmdline.c:
--------------
command line:	-autostart <Name>
description:	"Attach and autostart tape/disk image <name>"
resource:		N/A
action:		cmdline_autostart()

initcmdline.c:
--------------
command line:	-autoload <Name>
description:	"Attach and autoload tape/disk image <name>"
resource:		N/A
action:		cmdline_autoload()

initcmdline.c:
--------------
command line:	-1 <Name>
description:	"Attach <name> as a tape image"
resource:		N/A
action:		cmdline_attach()

initcmdline.c:
--------------
command line:	-8 <Name>
description:	"Attach <name> as a disk image in drive #8"
resource:		N/A
action:		cmdline_attach()

initcmdline.c:
--------------
command line:	-9 <Name>
description:	"Attach <name> as a disk image in drive #9"
resource:		N/A
action:		cmdline_attach()

initcmdline.c:
--------------
command line:	-10 <Name>
description:	"Attach <name> as a disk image in drive #10"
resource:		N/A
action:		cmdline_attach()

initcmdline.c:
--------------
command line:	-11 <Name>
description:	"Attach <name> as a disk image in drive #11"
resource:		N/A
action:		cmdline_attach()

kbdbuf.c:
---------
command line:	-keybuf <string>
description:	"Put the specified string into the keyboard buffer."
resource:		N/A
action:		kdb_buf_feed_cmdline()

kbdbuf.c:
---------
command line:	-keybuf-delay <value>
description:	"Set additional keyboard buffer delay (0: use default)"
resource:		"KbdbufDelay"
action:		N/A

lightpen.c:
-----------
command line:	-lightpen
description:	"Enable lightpen emulation"
resource:		"Lightpen" (set to 1)
action:		N/A

lightpen.c:
-----------
command line:	+lightpen
description:	"Disable lightpen emulation"
resource:		"Lightpen" (set to 0)
action:		N/A

lightpen.c:
-----------
command line:	-lightpentype <Type>
description:	"Set lightpen type" (fixme: needs better description)
resource:		"LightpenType"
action:		N/A

log.c:
------
command line:	-logfile <Name>
description:	"Specify log file name"
resource:		N/A
action:		log_logfile_opt() (sets "LogFileName")

log.c:
------
command line:	-verbose
description:	"Enable verbose log output."
resource:		N/A
action:		log_verbose_opt()

machine.c:
----------
command line:	-jamaction <Type>
description:	"Set action on CPU JAM: (0: Ask, 1: continue, 2: Monitor, 3: Reset, 4: Hard Reset, 5: Quit Emulator)"
resource:		"JAMAction"
action:		N/A

midi.c:
-------
command line:	-midi
description:	"Enable MIDI emulation"
resource:		"MIDIEnable" (set to 1)
action:		N/A

midi.c:
-------
command line:	+midi
description:	"Disable MIDI emulation"
resource:		"MIDIEnable" (set to 0)
action:		N/A

monitor/monitor.c:
------------------
command line:	-moncommands <Name>
description:	"Execute monitor commands from file"
resource:		N/A
action:		set_playback_name()

monitor/monitor.c:
------------------
command line:	-monlog <Name>
description:	"Write monitor output also to file"
resource:		N/A
action:		set_monlog_name()

monitor/monitor.c:
------------------
command line:	-initbreak <value>
description:	"Set an initial breakpoint for the monitor"
resource:		N/A
action:		monitor_set_initial_breakpoint()

monitor/monitor_network.c:
--------------------------
command line:	-remotemonitor
description:	"Enable remote monitor"
resource:		"MonitorServer" (set to 1)
action:		N/A

monitor/monitor_network.c:
--------------------------
command line:	+remotemonitor
description:	"Disable remote monitor"
resource:		"MonitorServer" (set to 0)
action:		N/A

monitor/monitor_network.c:
--------------------------
command line:	-remotemonitoraddress <Name>
description:	"The local address the remote monitor should bind to"
resource:		"MonitorServerAddress"
action:		N/A

mouse.c:
--------
command line:	-mouse
description:	"Enable mouse grab"
resource:		"Mouse" (set to 1)
action:		N/A

mouse.c:
--------
command line:	+mouse
description:	"Disable mouse grab"
resource:		"Mouse" (set to 0)
action:		N/A

mouse.c:
--------
command line:	-mousetype <value>
description:	"Select the mouse type (0 = 1351, 1 = NEOS, 2 = Amiga, 3 = Paddles, 4 = CX-22, 5 = ST, 6 = Smart, 7 = Micromys 8 = Koalapad)"
resource:		"Mousetype"
action:		N/A

mouse.c:
--------
command line:	-mouseport <value>
description:	"Select the joystick port the mouse is attached to"
resource:		"Mouseport"
action:		N/A

pet/pet-cmdline-options.c:
--------------------------
command line:	-pal
description:	"Use PAL sync factor"
resource:		"MachineVideoStandard" (set to MACHINE_SYNC_PAL)
action:		N/A

pet/pet-cmdline-options.c:
--------------------------
command line:	-ntsc
description:	"Use NTSC sync factor"
resource:		"MachineVideoStandard" (set to MACHINE_SYNC_NTSC)
action:		N/A

pet/pet-cmdline-options.c:
--------------------------
command line:	-model <modelnumber>
description:	"Specify PET model to emulate"
resource:		N/A
action:		pet_set_model() (sets "Basic1", "Basic1Chars", "ChargenName", "KernalName", "BasicName", "EditorName", "RomModule9Name",
			"RomModuleAName", "RomModuleBName", "H6809RomAName", "H6809RomBName", "H6809RomCName", "H6809RomDName", "H6809RomEName",
			"H6809RomFName")

pet/pet-cmdline-options.c:
--------------------------
command line:	-kernal <Name>
description:	"Specify name of Kernal ROM image"
resource:		"KernalName"
action:		N/A

pet/pet-cmdline-options.c:
--------------------------
command line:	-basic <Name>
description:	"Specify name of BASIC ROM image"
resource:		"BasicName"
action:		N/A

pet/pet-cmdline-options.c:
--------------------------
command line:	-editor <Name>
description:	"Specify name of Editor ROM image"
resource:		"EditorName"
action:		N/A

pet/pet-cmdline-options.c:
--------------------------
command line:	-chargen <Name>
description:	"Specify name of character generator ROM image"
resource:		"ChargenName"
action:		N/A

pet/pet-cmdline-options.c:
--------------------------
command line:	-rom9 <Name>
description:	"Specify 4K extension ROM name at $9***"
resource:		"RomModule9Name"
action:		N/A

pet/pet-cmdline-options.c:
--------------------------
command line:	-romA <Name>
description:	"Specify 4K extension ROM name at $A***"
resource:		"RomModuleAName"
action:		N/A

pet/pet-cmdline-options.c:
--------------------------
command line:	-romB <Name>
description:	"Specify 4K extension ROM name at $B***"
resource:		"RomModuleBName"
action:		N/A

pet/pet-cmdline-options.c:
--------------------------
command line:	-petram9
description:	"Enable PET8296 4K RAM mapping at $9***"
resource:		"Ram9" (set to 1)
action:		N/A

pet/pet-cmdline-options.c:
--------------------------
command line:	+petram9
description:	"Disable PET8296 4K RAM mapping at $9***"
resource:		"Ram9" (set to 0)
action:		N/A

pet/pet-cmdline-options.c:
--------------------------
command line:	-petramA
description:	"Enable PET8296 4K RAM mapping at $A***"
resource:		"RamA" (set to 1)
action:		N/A

pet/pet-cmdline-options.c:
--------------------------
command line:	+petramA
description:	"Disable PET8296 4K RAM mapping at $A***"
resource:		"RamA" (set to 0)
action:		N/A

pet/pet-cmdline-options.c:
--------------------------
command line:	-superpet
description:	"Enable SuperPET I/O"
resource:		"SuperPET" (set to 1)
action:		N/A

pet/pet-cmdline-options.c:
--------------------------
command line:	+superpet
description:	"Disable SuperPET I/O"
resource:		"SuperPET" (set to 0)
action:		N/A

pet/pet-cmdline-options.c:
--------------------------
command line:	-basic1
description:	"Enable ROM 1 Kernal patches"
resource:		"Basic1" (set to 1)
action:		N/A

pet/pet-cmdline-options.c:
--------------------------
command line:	+basic1
description:	"Disable ROM 1 Kernal patches"
resource:		"Basic1" (set to 0)
action:		N/A

pet/pet-cmdline-options.c:
--------------------------
command line:	-basic1char
description:	"Switch upper/lower case charset"
resource:		"Basic1Chars" (set to 1)
action:		N/A

pet/pet-cmdline-options.c:
--------------------------
command line:	+basic1char
description:	"Do not switch upper/lower case charset"
resource:		"Basic1Chars" (set to 0)
action:		N/A

pet/pet-cmdline-options.c:
--------------------------
command line:	-eoiblank
description:	"EOI blanks screen"
resource:		"EoiBlank" (set to 1)
action:		N/A

pet/pet-cmdline-options.c:
--------------------------
command line:	+eoiblank
description:	"EOI does not blank screen"
resource:		"EoiBlank" (set to 0)
action:		N/A

pet/pet-cmdline-options.c:
--------------------------
command line:	-keymap <number>
description:	"Specify index of keymap file" (fixme: needs better description)
resource:		"KeymapIndex"
action:		N/A

pet/pet-cmdline-options.c:
--------------------------
command line:	-grsymkeymap <Name>
description:	"Specify name of graphics keyboard symbolic keymap file"
resource:		"KeymapGraphicsSymFile"
action:		N/A

pet/pet-cmdline-options.c:
--------------------------
command line:	-grposkeymap <Name>
description:	"Specify name of graphics keyboard positional keymap file"
resource:		"KeymapGraphicsPosFile"
action:		N/A

pet/pet-cmdline-options.c:
--------------------------
command line:	-buksymkeymap <Name>
description:	"Specify name of UK business keyboard symbolic keymap file"
resource:		"KeymapBusinessUKSymFile"
action:		N/A

pet/pet-cmdline-options.c:
--------------------------
command line:	-bukposkeymap <Name>
description:	"Specify name of UK business keyboard positional keymap file"
resource:		"KeymapBusinessUKPosFile"
action:		N/A

pet/pet-cmdline-options.c:
--------------------------
command line:	-bdesymkeymap <Name>
description:	"Specify name of German business keyboard symbolic keymap file"
resource:		"KeymapBusinessDESymFile"
action:		N/A

pet/pet-cmdline-options.c:
--------------------------
command line:	-bdeposkeymap <Name>
description:	"Specify name of German business keyboard positional keymap file"
resource:		"KeymapBusinessDEPosFile"
action:		N/A

pet/pet-cmdline-options.c:
--------------------------
command line:	-cpu6502
description:	"Set SuperPET CPU switch to '6502'"
resource:		"CPUswitch" (set to SUPERPET_CPU_6502)
action:		N/A

pet/pet-cmdline-options.c:
--------------------------
command line:	-cpu6809
description:	"Set SuperPET CPU switch to '6809'"
resource:		"CPUswitch" (set to SUPERPET_CPU_6809)
action:		N/A

pet/pet-cmdline-options.c:
--------------------------
command line:	-cpuprog
description:	"Set SuperPET CPU switch to 'Prog'"
resource:		"CPUswitch" (set to SUPERPET_CPU_PROG)
action:		N/A

pet/pet-cmdline-options.c:
--------------------------
command line:	-6809romA <Name>
description:	"Specify 4K to 24K ROM file name at $A000 for 6809"
resource:		"H6809RomAName"
action:		N/A

pet/pet-cmdline-options.c:
--------------------------
command line:	-6809romB <Name>
description:	"Specify 4K to 20K ROM file name at $B000 for 6809"
resource:		"H6809RomBName"
action:		N/A

pet/pet-cmdline-options.c:
--------------------------
command line:	-6809romC <Name>
description:	"Specify 4K to 16K ROM file name at $C000 for 6809"
resource:		"H6809RomCName"
action:		N/A

pet/pet-cmdline-options.c:
--------------------------
command line:	-6809romD <Name>
description:	"Specify 4K to 12K ROM file name at $D000 for 6809"
resource:		"H6809RomDName"
action:		N/A

pet/pet-cmdline-options.c:
--------------------------
command line:	-6809romE <Name>
description:	"Specify 2K or 8K ROM file name at $E000 for 6809"
resource:		"H6809RomEName"
action:		N/A

pet/pet-cmdline-options.c:
--------------------------
command line:	-6809romF <Name>
description:	"Specify 4K ROM file name at $F000 for 6809"
resource:		"H6809RomFName"
action:		N/A

pet/pet-cmdline-options.c:
--------------------------
command line:	-colour-rgbi
description:	"RGBI colour extension to PET 4032"
resource:		"PETColour" (set to PET_COLOUR_TYPE_RGBI)
action:		N/A

pet/pet-cmdline-options.c:
--------------------------
command line:	-colour-analog
description:	"Analog colour extension to PET 4032"
resource:		"PETColour" (set to PET_COLOUR_TYPE_ANALOG)
action:		N/A

pet/pet-cmdline-options.c:
--------------------------
command line:	-colour-analog-bg <Colour 0-255>
description:	"Analog colour background on PET 4032"
resource:		"PETColourBG"
action:		N/A

pet/pet-sidcart.c:
------------------
command line:	-sidcart
description:	"Enable the SID cartridge"
resource:		"SidCart" (set to 1)
action:		N/A

pet/pet-sidcart.c:
------------------
command line:	+sidcart
description:	"Disable the SID cartridge"
resource:		"SidCart" (set to 0)
action:		N/A

pet/petdww.c:
-------------
command line:	-petdww
description:	"Enable the PET DWW hi-res board"
resource:		"PETDWW" (set to 1)
action:		N/A

pet/petdww.c:
-------------
command line:	+petdww
description:	"Disable the PET DWW hi-res board"
resource:		"PETDWW" (set to 0)
action:		N/A

pet/petdww.c:
-------------
command line:	-petdwwimage <Name>
description:	"Specify name of PET DWW image"
resource:		"PETDWWfilename"
action:		N/A

pet/pethre.c:
-------------
command line:	-pethre
description:	"Enable HiRes Emulation Board"
resource:		"PETHRE" (set to 1)
action:		N/A

pet/pethre.c:
-------------
command line:	+pethre
description:	"Disable HiRes Emulation Board"
resource:		"PETHRE" (set to 0)
action:		N/A

pet/petpia1.c:
--------------
command line:	-diagpin
description:	"Enable userport diagnostic pin"
resource:		"DiagPin" (set to 1)
action:		N/A

pet/petpia1.c:
--------------
command line:	+diagpin
description:	"Disable userport diagnostic pin"
resource:		"DiagPin" (set to 0)
action:		N/A

pet/petreu.c:
-------------
command line:	-petreu
description:	"Enable the PET Ram and Expansion Unit"
resource:		"PETREU" (set to 1)
action:		N/A

pet/petreu.c:
-------------
command line:	+petreu
description:	"Disable the PET Ram and Expansion Unit"
resource:		"PETREU" (set to 0)
action:		N/A

pet/petreu.c:
-------------
command line:	-petreuimage <Name>
description:	"Specify name of PET Ram and Expansion Unit image"
resource:		"PETREUfilename"
action:		N/A

pet/petreu.c:
-------------
command line:	-petreuramsize <size in KB>
description:	"Size of the PET Ram and Expansion Unit"
resource:		"PETREUsize"
action:		N/A

plus4/digiblaster.c:
--------------------
command line:	-digiblaster
description:	"Enable the digiblaster add-on"
resource:		"DIGIBLASTER" (set to 1)
action:		N/A

plus4/digiblaster.c:
--------------------
command line:	+digiblaster
description:	"Disable the digiblaster add-on"
resource:		"DIGIBLASTER" (set to 0)
action:		N/A

plus4/plus4-cmdline-options.c:
------------------------------
command line:	-pal
description:	"Use PAL sync factor"
resource:		"MachineVideoStandard" (set to MACHINE_SYNC_PAL)
action:		N/A

plus4/plus4-cmdline-options.c:
------------------------------
command line:	-ntsc
description:	"Use NTSC sync factor"
resource:		"MachineVideoStandard" (set to MACHINE_SYNC_NTSC)
action:		N/A

plus4/plus4-cmdline-options.c:
------------------------------
command line:	-kernal <Name>
description:	"Specify name of Kernal ROM image"
resource:		"KernalName"
action:		N/A

plus4/plus4-cmdline-options.c:
------------------------------
command line:	-basic <Name>
description:	"Specify name of BASIC ROM image"
resource:		"BasicName"
action:		N/A

plus4/plus4-cmdline-options.c:
------------------------------
command line:	-functionlo <Name>
description:	"Specify name of Function low ROM image"
resource:		"FunctionLowName"
action:		N/A

plus4/plus4-cmdline-options.c:
------------------------------
command line:	-functionhi <Name>
description:	"Specify name of Function high ROM image"
resource:		"FunctionHighName"
action:		N/A

plus4/plus4-cmdline-options.c:
------------------------------
command line:	-c1lo <Name>
description:	"Specify name of Cartridge 1 low ROM image"
resource:		"c1loName"
action:		N/A

plus4/plus4-cmdline-options.c:
------------------------------
command line:	-c1hi <Name>
description:	"Specify name of Cartridge 1 high ROM image"
resource:		"c1hiName"
action:		N/A

plus4/plus4-cmdline-options.c:
------------------------------
command line:	-c2lo <Name>
description:	"Specify name of Cartridge 2 low ROM image"
resource:		"c2loName"
action:		N/A

plus4/plus4-cmdline-options.c:
------------------------------
command line:	-c2hi <Name>
description:	"Specify name of Cartridge 2 high ROM image"
resource:		"c2hiName"
action:		N/A

plus4/plus4-cmdline-options.c:
------------------------------
command line:	-ramsize <RAM size>
description:	"Specify size of RAM installed in kb (16/32/64)"
resource:		"RamSize"
action:		N/A

plus4/plus4-cmdline-options.c:
------------------------------
command line:	-keymap <number>
description:	"Specify index of keymap file (0=symbol, 1=positional)"
resource:		"KeymapIndex"
action:		N/A

plus4/plus4-cmdline-options.c:
------------------------------
command line:	-symkeymap <Name>
description:	"Specify name of symbolic keymap file"
resource:		"KeymapSymFile"
action:		N/A

plus4/plus4-cmdline-options.c:
------------------------------
command line:	-poskeymap <Name>
description:	"Specify name of positional keymap file"
resource:		"KeymapPosFile"
action:		N/A

plus4/plus4-cmdline-options.c:
------------------------------
command line:	-model <Model>
description:	"Set Plus4 model (c16/c16pal/c16ntsc, plus4/plus4pal/plus4ntsc, v364/cv364, c232)"
resource:		N/A
action:		set_plus4_model() (sets "MachineVideoStandard", "RamSize", "KernalName", "BasicName", "FunctionLowName", "FunctionHighName",
			"Acia1Enable", "SpeechImage", "SpeechEnabled")

plus4/plus4-sidcart.c:
----------------------
command line:	-sidcart
description:	"Enable the SID cartridge"
resource:		"SidCart" (set to 1)
action:		N/A

plus4/plus4-sidcart.c:
----------------------
command line:	+sidcart
description:	"Disable the SID cartridge"
resource:		"SidCart" (set to 0)
action:		N/A

plus4/plus4-sidcart.c:
----------------------
command line:	-sidcartjoy
description:	"Enable SID cartridge joystick"
resource:		"SIDCartJoy" (set to 1)
action:		N/A

plus4/plus4-sidcart.c:
----------------------
command line:	+sidcartjoy
description:	"Disable SID cartridge joystick"
resource:		"SIDCartJoy" (set to 0)
action:		N/A

plus4/plus4acia.c:
------------------
command line:	-acia
description:	"Enable the ACIA emulation"
resource:		"Acia1Enable" (set to 1)
action:		N/A

plus4/plus4acia.c:
------------------
command line:	+acia
description:	"Disable the ACIA emulation"
resource:		"Acia1Enable" (set to 0)
action:		N/A

plus4/plus4cart.c:
------------------
command line:	-cartreset
description:	"Reset machine if a cartridge is attached or detached"
resource:		"CartridgeReset" (set to 1)
action:		N/A

plus4/plus4cart.c:
------------------
command line:	+cartreset
description:	"Do not reset machine if a cartridge is attached or detached"
resource:		"CartridgeReset" (set to 0)
action:		N/A

plus4/plus4cart.c:
------------------
command line:	-cart <Name>
description:	"Smart-attach cartridge image"
resource:		N/A
action:		cart_attach_cmdline()

plus4/plus4cart.c:
------------------
command line:	+cart
description:	"Disable default cartridge"
resource:		N/A
action:		cart_attach_cmdline()

plus4/plus4memcsory256k.c:
--------------------------
command line:	-cs256k
description:	"Enable the CSORY 256K RAM expansion"
resource:		"CS256K" (set to 1) (fixme: make a better system for this)
action:		N/A

plus4/plus4memhannes256k.c:
---------------------------
command line:	-h256k
description:	"Enable the HANNES 256K RAM expansion"
resource:		"H256K" (set to 1) (fixme: make a better system for this)
action:		N/A

plus4/plus4memhannes256k.c:
---------------------------
command line:	-h1024k
description:	"Enable the HANNES 1024K RAM expansion"
resource:		"H256K" (set to 2) (fixme: make a better system for this)
action:		N/A

plus4/plus4memhannes256k.c:
---------------------------
command line:	-h4096k
description:	"Enable the HANNES 4096K RAM expansion"
resource:		"H256K" (set to 3) (fixme: make a better system for this)
action:		N/A

plus4/plus4speech.c:
--------------------
command line:	-speech
description:	"Enable the v364 speech add-on"
resource:		"SpeechEnabled" (set to 1)
action:		N/A

plus4/plus4speech.c:
--------------------
command line:	+speech
description:	"Disable the v364 speech add-on"
resource:		"SpeechEnabled" (set to 0)
action:		N/A

plus4/plus4speech.c:
--------------------
command line:	-speechrom <Name>
description:	"Attach Speech ROM image"
resource:		N/A
action:		set_speech_rom() (sets "SpeechImage" and "SpeechEnabled")

plus4/ted-cmdline-options.c:
----------------------------
command line:	-TEDborders <Mode>
description:	"Set VIC-II border display mode (0: normal, 1: full, 2: debug)" (fixme: incorrect description)
resource:		N/A
action:		border_set_func() (sets "TEDBorderMode")

plus4/ted-cmdline-options.c:
----------------------------
command line:	-TEDvcache
description:	"Enable the video cache"
resource:		"TEDVideoCache" (set to 1)
action:		N/A

plus4/ted-cmdline-options.c:
----------------------------
command line:	+TEDvcache
description:	"Disable the video cache"
resource:		"TEDVideoCache" (set to 0)
action:		N/A

plus4/ted-cmdline-options.c:
----------------------------
command line:	-TEDdsize
description:	"Enable double size"
resource:		"TEDDoubleSize" (set to 1)
action:		N/A

plus4/ted-cmdline-options.c:
----------------------------
command line:	+TEDdsize
description:	"Disable double size"
resource:		"TEDDoubleSize" (set to 0)
action:		N/A

plus4/ted-cmdline-options.c:
----------------------------
command line:	-TEDdscan
description:	"Enable double scan"
resource:		"TEDDoubleScan" (set to 1)
action:		N/A

plus4/ted-cmdline-options.c:
----------------------------
command line:	+TEDdscan
description:	"Disable double scan"
resource:		"TEDDoubleScan" (set to 0)
action:		N/A

plus4/ted-cmdline-options.c:
----------------------------
command line:	-TEDaudioleak
description:	"Enable audio leak emulation"
resource:		"TEDAudioLeak" (set to 1)
action:		N/A

plus4/ted-cmdline-options.c:
----------------------------
command line:	+TEDaudioleak
description:	"Disable audio leak emulation"
resource:		"TEDAudioLeak" (set to 0)
action:		N/A

plus4/ted-cmdline-options.c:
----------------------------
command line:	-TEDhwscale
description:	"Enable hardware scaling"
resource:		"TEDHwScale" (set to 1)
action:		N/A

plus4/ted-cmdline-options.c:
----------------------------
command line:	+TEDhwscale
description:	"Disable hardware scaling"
resource:		"TEDHwScale" (set to 0)
action:		N/A

plus4/ted-cmdline-options.c:
----------------------------
command line:	-TEDfilter <Mode>
description:	"Select rendering filter: (0: none, 1: CRT emulation, 2: scale2x)"
resource:		"TEDFilter"
action:		N/A

plus4/ted-cmdline-options.c:
----------------------------
command line:	-TEDintpal
description:	"Use an internal calculated palette"
resource:		"TEDExternalPalette" (set to 0)
action:		N/A

plus4/ted-cmdline-options.c:
----------------------------
command line:	-TEDextpal
description:	"Use an external palette (file)"
resource:		"TEDExternalPalette" (set to 1)
action:		N/A

plus4/ted-cmdline-options.c:
----------------------------
command line:	-TEDpalette <Name>
description:	"Specify name of file of external palette"
resource:		"TEDPaletteFile"
action:		N/A

plus4/ted-cmdline-options.c:
----------------------------
command line:	-TEDSDLfull
description:	"Enable fullscreen"
resource:		"TEDSDLFullscreen" (set to 1)
action:		N/A

plus4/ted-cmdline-options.c:
----------------------------
command line:	+TEDSDLfull
description:	"Disable fullscreen"
resource:		"TEDSDLFullscreen" (set to 0)
action:		N/A

plus4/ted-cmdline-options.c:
----------------------------
command line:	-TEDSDLfulldevice <device>
description:	"Select fullscreen device"
resource:		"TEDSDLFullscreenDevice"
action:		N/A

plus4/ted-cmdline-options.c:
----------------------------
command line:	-TEDXRANDRfull
description:	"Enable fullscreen"
resource:		"TEDXRANDRFullscreen" (set to 1)
action:		N/A

plus4/ted-cmdline-options.c:
----------------------------
command line:	+TEDXRANDRfull
description:	"Disable fullscreen"
resource:		"TEDXRANDRFullscreen" (set to 0)
action:		N/A

plus4/ted-cmdline-options.c:
----------------------------
command line:	-TEDXRANDRfulldevice <device>
description:	"Select fullscreen device"
resource:		"TEDXRANDRFullscreenDevice"
action:		N/A

plus4/ted-cmdline-options.c:
----------------------------
command line:	-TEDVidmodefull
description:	"Enable fullscreen"
resource:		"TEDVidmodeFullscreen" (set to 1)
action:		N/A

plus4/ted-cmdline-options.c:
----------------------------
command line:	+TEDVidmodefull
description:	"Disable fullscreen"
resource:		"TEDVidmodeFullscreen" (set to 0)
action:		N/A

plus4/ted-cmdline-options.c:
----------------------------
command line:	-TEDVidmodefulldevice <device>
description:	"Select fullscreen device"
resource:		"CRTCVidmodeFullscreenDevice"
action:		N/A

plus4/ted-cmdline-options.c:
----------------------------
command line:	-TEDSDLfullmode <Mode>
description:	"Select fullscreen mode"
resource:		"TEDSDLFullscreenMode"
action:		N/A

plus4/ted-cmdline-options.c:
----------------------------
command line:	-TEDXRANDRfullmode <Mode>
description:	"Select fullscreen mode"
resource:		"TEDXRANDRFullscreenMode"
action:		N/A

plus4/ted-cmdline-options.c:
----------------------------
command line:	-TEDVidmodefullmode <Mode>
description:	"Select fullscreen mode"
resource:		"TEDVidmodeFullscreenMode"
action:		N/A

plus4/ted-cmdline-options.c:
----------------------------
command line:	-TEDsaturation <0-2000>
description:	"Set saturation of internal calculated palette [1000]"
resource:		"TEDColorSaturation"
action:		N/A

plus4/ted-cmdline-options.c:
----------------------------
command line:	-TEDcontrast <0-2000>
description:	"Set contrast of internal calculated palette [1000]"
resource:		"TEDColorContrast"
action:		N/A

plus4/ted-cmdline-options.c:
----------------------------
command line:	-TEDbrightness <0-2000>
description:	"Set brightness of internal calculated palette [1000]"
resource:		"TEDColorBrightness"
action:		N/A

plus4/ted-cmdline-options.c:
----------------------------
command line:	-TEDgamma <0-4000>
description:	"Set gamma of internal calculated palette [2200]"
resource:		"TEDColorGamma"
action:		N/A

plus4/ted-cmdline-options.c:
----------------------------
command line:	-TEDtint <0-2000>
description:	"Set tint of internal calculated palette [1000]"
resource:		"TEDColorTint"
action:		N/A

plus4/ted-cmdline-options.c:
----------------------------
command line:	-TEDoddlinesphase <0-2000>
description:	"Set phase for color carrier in odd lines [1250]"
resource:		"TEDPALOddLinePhase"
action:		N/A

plus4/ted-cmdline-options.c:
----------------------------
command line:	-TEDoddlinesoffset <0-2000>
description:	"Set phase offset for color carrier in odd lines [750]"
resource:		"TEDPALOddLineOffset"
action:		N/A

plus4/ted-cmdline-options.c:
----------------------------
command line:	-TEDcrtblur <0-1000>
description:	"Amount of horizontal blur for the CRT emulation. [500]"
resource:		"TEDPALBlur"
action:		N/A

plus4/ted-cmdline-options.c:
----------------------------
command line:	-TEDcrtscanlineshade <0-1000>
description:	"Amount of scan line shading for the CRT emulation [667]"
resource:		"TEDPALScanLineShade"
action:		N/A

printerdrv/driver-select.c:
---------------------------
command line:	-pr4drv <Name>
description:	"Specify name of printer driver for device #4" (fixme: needs better description)
resource:		"Printer4Driver"
action:		N/A

printerdrv/driver-select.c:
---------------------------
command line:	-pr5drv <Name>
description:	"Specify name of printer driver for device #5" (fixme: needs better description)
resource:		"Printer5Driver"
action:		N/A

printerdrv/driver-select.c:
---------------------------
command line:	-pr6drv <Name>
description:	"Specify name of printer driver for device #6" (fixme: needs better description)
resource:		"Printer6Driver"
action:		N/A

printerdrv/driver-select.c:
---------------------------
command line:	-pruserdrv <Name>
description:	"Specify name of printer driver for the userport printer" (fixme: needs better description)
resource:		"PrinterUserportDriver"
action:		N/A

printerdrv/interface-serial.c:
------------------------------
command line:	-device4 <Type>
description:	"Set device type for device #4 (0: NONE, 1: FS, 2: REAL)"
resource:		"Printer4"
action:		N/A

printerdrv/interface-serial.c:
------------------------------
command line:	-device5 <Type>
description:	"Set device type for device #5 (0: NONE, 1: FS, 2: REAL)"
resource:		"Printer5"
action:		N/A

printerdrv/interface-serial.c:
------------------------------
command line:	-device6 <Type>
description:	"Set device type for device #6 (0: NONE, 1: FS, 2: REAL)"
resource:		"Printer6"
action:		N/A

printerdrv/interface-serial.c:
------------------------------
command line:	-device7 <Type>
description:	"Set device type for device #7 (0: NONE, 2: REAL)"
resource:		"Printer7"
action:		N/A

printerdrv/interface-userport.c:
--------------------------------
command line:	-pruser
description:	"Enable the userport printer emulation"
resource:		"PrinterUserport" (set to 1)
action:		N/A

printerdrv/interface-userport.c:
--------------------------------
command line:	+pruser
description:	"Disable the userport printer emulation"
resource:		"PrinterUserport" (set to 0)
action:		N/A

printerdrv/output-select.c:
---------------------------
command line:	-pr4output <Name>
description:	"Specify name of output device for device #4"
resource:		"Printer4Output"
action:		N/A

printerdrv/output-select.c:
---------------------------
command line:	-pr5output <Name>
description:	"Specify name of output device for device #5"
resource:		"Printer5Output"
action:		N/A

printerdrv/output-text.c:
-------------------------
command line:	-prtxtdev1 <Name>
description:	"Specify name of printer text device or dump file"
resource:		"PrinterTextDevice1"
action:		N/A

printerdrv/output-text.c:
-------------------------
command line:	-prtxtdev2 <Name>
description:	"Specify name of printer text device or dump file"
resource:		"PrinterTextDevice2"
action:		N/A

printerdrv/output-text.c:
-------------------------
command line:	-prtxtdev3 <Name>
description:	"Specify name of printer text device or dump file"
resource:		"PrinterTextDevice3"
action:		N/A

printerdrv/output-text.c:
-------------------------
command line:	-pr4txtdev <0-2>
description:	"Specify printer text output device for printer #4"
resource:		"Printer4TextDevice"
action:		N/A

printerdrv/output-text.c:
-------------------------
command line:	-pr5txtdev <0-2>
description:	"Specify printer text output device for printer #5"
resource:		"Printer5TextDevice"
action:		N/A

printerdrv/output-text.c:
-------------------------
command line:	-pr6txtdev <0-2>
description:	"Specify printer text output device for printer #6"
resource:		"Printer6TextDevice"
action:		N/A

ps2mouse.c:
-----------
command line:	-ps2mouse
description:	"Enable PS/2 mouse on userport"
resource:		"PS2Mouse" (set to 1)
action:		N/A

ps2mouse.c:
-----------
command line:	+ps2mouse
description:	"Disable PS/2 mouse on userport"
resource:		"PS2Mouse" (set to 0)
action:		N/A

ram.c:
------
command line:	-raminitstartvalue <value>
description:	"Set the value for the very first RAM address after powerup"
resource:		"RAMInitStartValue"
action:		N/A

ram.c:
------
command line:	-raminitvalueinvert <num of bytes>
description:	"Length of memory block initialized with the same value"
resource:		"RAMInitValueInvert"
action:		N/A

ram.c:
------
command line:	-raminitpatterninvert <num of bytes>
description:	"Length of memory block initialized with the same pattern"
resource:		"RAMInitPatternInvert"
action:		N/A

romset.c:
---------
command line:	-romsetfile <File>
description:	"load the given romset file"
resource:		N/A
action:		option_romsetfile()

romset.c:
---------
command line:	-romsetarchive <File>
description:	"load the given romset archive"
resource:		N/A
action:		option_romsetarchive()

romset.c:
---------
command line:	-romsetarchiveselect <Item number>
description:	"select the given item from the current romset archive"
resource:		N/A
action:		option_romsetarchiveselect()

rs232drv/rs232drv.c:
--------------------
command line:	-rsdev1 <Name>
description:	"Specify name of first RS232 device"
resource:		"RsDevice1"
action:		N/A

rs232drv/rs232drv.c:
--------------------
command line:	-rsdev2 <Name>
description:	"Specify name of second RS232 device"
resource:		"RsDevice2"
action:		N/A

rs232drv/rs232drv.c:
--------------------
command line:	-rsdev3 <Name>
description:	"Specify name of third RS232 device"
resource:		"RsDevice3"
action:		N/A

rs232drv/rs232drv.c:
--------------------
command line:	-rsdev4 <Name>
description:	"Specify name of fourth RS232 device"
resource:		"RsDevice4"
action:		N/A

rs232drv/rsuser.c:
------------------
command line:	-rsuser
description:	"Enable RS232 userport emulation"
resource:		"RsUserEnable" (set to 1)
action:		N/A

rs232drv/rsuser.c:
------------------
command line:	+rsuser
description:	"Disable RS232 userport emulation"
resource:		"RsUserEnable" (set to 0)
action:		N/A

rs232drv/rsuser.c:
------------------
command line:	-rsuserbaud <baud>
description:	"Set the baud rate of the RS232 userport emulation."
resource:		"RsUserBaud"
action:		N/A

rs232drv/rsuser.c:
------------------
command line:	-rsuserdev <0-3>
description:	"Specify VICE RS232 device for userport"
resource:		"RsUserDev"
action:		N/A

scpu64/scpu64-cmdline-options.c:
--------------------------------
command line:	-pal
description:	"Use PAL sync factor"
resource:		N/A
action:		set_video_standard() (sets "VICIIModel")

scpu64/scpu64-cmdline-options.c:
--------------------------------
command line:	-ntsc
description:	"Use NTSC sync factor"
resource:		N/A
action:		set_video_standard() (sets "VICIIModel")

scpu64/scpu64-cmdline-options.c:
--------------------------------
command line:	-ntscold
description:	"Use old NTSC sync factor"
resource:		N/A
action:		set_video_standard() (sets "VICIIModel")

scpu64/scpu64-cmdline-options.c:
--------------------------------
command line:	-paln
description:	"Use PAL-N sync factor"
resource:		N/A
action:		set_video_standard() (sets "VICIIModel")

scpu64/scpu64-cmdline-options.c:
--------------------------------
command line:	-scpu64 <Name>
description:	"Specify name of Kernal ROM image" (fixme: needs better description)
resource:		"SCPU64Name"
action:		N/A

scpu64/scpu64-cmdline-options.c:
--------------------------------
command line:	-chargen <Name>
description:	"Specify name of character generator ROM image"
resource:		"ChargenName"
action:		N/A

scpu64/scpu64-cmdline-options.c:
--------------------------------
command line:	-keymap <number>
description:	"Specify index of keymap file (0=sym, 1=symDE, 2=pos)"
resource:		"KeymapIndex"
action:		N/A

scpu64/scpu64-cmdline-options.c:
--------------------------------
command line:	-symkeymap <Name>
description:	"Specify name of symbolic keymap file"
resource:		"KeymapSymFile"
action:		N/A

scpu64/scpu64-cmdline-options.c:
--------------------------------
command line:	-symdekeymap <Name>
description:	"Specify name of symbolic German keymap file"
resource:		"KeymapSymDeFile"
action:		N/A

scpu64/scpu64-cmdline-options.c:
--------------------------------
command line:	-poskeymap <Name>
description:	"Specify name of positional keymap file"
resource:		"KeymapPosFile"
action:		N/A

scpu64/scpu64-cmdline-options.c:
--------------------------------
command line:	-ciamodel <Model>
description:	"Set both CIA models (0 = old 6526, 1 = new 6526A)"
resource:		N/A
action:		set_cia_model() (sets "CIA1Model" and "CIA2Model")

scpu64/scpu64-cmdline-options.c:
--------------------------------
command line:	-cia1model <Model>
description:	"Set CIA 1 model (0 = old 6526, 1 = new 6526A)"
resource:		"CIA1Model"
action:		N/A

scpu64/scpu64-cmdline-options.c:
--------------------------------
command line:	-cia2model <Model>
description:	"Set CIA 2 model (0 = old 6526, 1 = new 6526A)"
resource:		"CIA2Model"
action:		N/A

scpu64/scpu64-cmdline-options.c:
--------------------------------
command line:	-model <modelnumber>
description:	"Set C64 model (c64/c64c/c64old, ntsc/newntsc/oldntsc, drean, jap, c64gs)"
resource:		N/A
action:		set_c64_model() (sets "MachineVideoStandard", "CIA1Model", "CIA2Model", "VICIINewLuminances", "BoardType", "IECReset",
			"KernalName", "ChargenName", "SidEngine" and "SidModel")

scpu64/scpu64-cmdline-options.c:
--------------------------------
command line:	-burstmod <value>
description:	"Burst modification (0 = None, 1 = CIA1, 2 = CIA2)"
resource:		"BurstMod"
action:		N/A

scpu64/scpu64-cmdline-options.c:
--------------------------------
command line:	-iecreset <value>
description:	"Computer reset goes to IEC bus (0 = No, 1 = Yes)"
resource:		"IECReset"
action:		N/A

scpu64/scpu64-cmdline-options.c:
--------------------------------
command line:	-simmsize <number>
description:	"Size of the SIMM RAM (0/1/4/8/16 MB)"
resource:		"SIMMSize"
action:		N/A

scpu64/scpu64-cmdline-options.c:
--------------------------------
command line:	-jiffyswitch
description:	"Turn on Jiffy switch"
resource:		"JiffySwitch" (set to 1)
action:		N/A

scpu64/scpu64-cmdline-options.c:
--------------------------------
command line:	+jiffyswitch
description:	"Turn off Jiffy switch"
resource:		"JiffySwitch" (set to 0)
action:		N/A

scpu64/scpu64-cmdline-options.c:
--------------------------------
command line:	-speedswitch
description:	"Turn on Speed switch"
resource:		"SpeedSwitch" (set to 1)
action:		N/A

scpu64/scpu64-cmdline-options.c:
--------------------------------
command line:	+speedswitch
description:	"Turn off Speed switch"
resource:		"SpeedSwitch" (set to 0)
action:		N/A

scpu64/scpu64gluelogic.c:
-------------------------
command line:	-gluelogictype <Type>
description:	"Set glue logic type (0 = discrete, 1 = 252535-01)"
resource:		"GlueLogic"
action:		N/A

serial/serial-iec-device.c:
---------------------------
command line:	-iecdevice4
description:	"Enable IEC device emulation for device #4"
resource:		"IECDevice4" (set to 1)
action:		N/A

serial/serial-iec-device.c:
---------------------------
command line:	+iecdevice4
description:	"Disable IEC device emulation for device #4"
resource:		"IECDevice4" (set to 0)
action:		N/A

serial/serial-iec-device.c:
---------------------------
command line:	-iecdevice5
description:	"Enable IEC device emulation for device #5"
resource:		"IECDevice5" (set to 1)
action:		N/A

serial/serial-iec-device.c:
---------------------------
command line:	+iecdevice5
description:	"Disable IEC device emulation for device #5"
resource:		"IECDevice5" (set to 0)
action:		N/A

serial/serial-iec-device.c:
---------------------------
command line:	-iecdevice6
description:	"Enable IEC device emulation for device #6"
resource:		"IECDevice6" (set to 1)
action:		N/A

serial/serial-iec-device.c:
---------------------------
command line:	+iecdevice6
description:	"Disable IEC device emulation for device #6"
resource:		"IECDevice6" (set to 0)
action:		N/A

serial/serial-iec-device.c:
---------------------------
command line:	-iecdevice7
description:	"Enable IEC device emulation for device #7"
resource:		"IECDevice7" (set to 1)
action:		N/A

serial/serial-iec-device.c:
---------------------------
command line:	+iecdevice7
description:	"Disable IEC device emulation for device #7"
resource:		"IECDevice7" (set to 0)
action:		N/A

serial/serial-iec-device.c:
---------------------------
command line:	-iecdevice8
description:	"Enable IEC device emulation for device #8"
resource:		"IECDevice8" (set to 1)
action:		N/A

serial/serial-iec-device.c:
---------------------------
command line:	+iecdevice8
description:	"Disable IEC device emulation for device #8"
resource:		"IECDevice8" (set to 0)
action:		N/A

serial/serial-iec-device.c:
---------------------------
command line:	-iecdevice9
description:	"Enable IEC device emulation for device #9"
resource:		"IECDevice9" (set to 1)
action:		N/A

serial/serial-iec-device.c:
---------------------------
command line:	+iecdevice9
description:	"Disable IEC device emulation for device #9"
resource:		"IECDevice9" (set to 0)
action:		N/A

serial/serial-iec-device.c:
---------------------------
command line:	-iecdevice10
description:	"Enable IEC device emulation for device #10"
resource:		"IECDevice10" (set to 1)
action:		N/A

serial/serial-iec-device.c:
---------------------------
command line:	+iecdevice10
description:	"Disable IEC device emulation for device #10"
resource:		"IECDevice10" (set to 0)
action:		N/A

serial/serial-iec-device.c:
---------------------------
command line:	-iecdevice11
description:	"Enable IEC device emulation for device #11"
resource:		"IECDevice11" (set to 1)
action:		N/A

serial/serial-iec-device.c:
---------------------------
command line:	+iecdevice11
description:	"Disable IEC device emulation for device #11"
resource:		"IECDevice11" (set to 0)
action:		N/A

sid/sid-cmdline-options.c:
--------------------------
command line:	-sidenginemodel <engine and model>
description:	"Specify SID engine and model (0: FastSID 6581, 1: FastSID 8580, 256: ReSID 6581, 257: ReSID 8580, 258: ReSID 8580 + digiboost, 260: DTVSID, 512: Catweasel, 768: HardSID, 1024: ParSID in par port 1, 1280: ParSID in par port 2, 1536: ParSID in par port 3)"
resource:		N/A
action:		sid_common_set_engine_model() (sets "SidEngine" and "SidModel")

sid/sid-cmdline-options.c:
--------------------------
command line:	-residsamp <method>
description:	"reSID sampling method (0: fast, 1: interpolating, 2: resampling, 3: fast resampling)"
resource:		"SidResidSampling"
action:		N/A

sid/sid-cmdline-options.c:
--------------------------
command line:	-residpass <percent>
description:	"reSID resampling passband in percentage of total bandwidth (0 - 90)"
resource:		"SidResidPassband"
action:		N/A

sid/sid-cmdline-options.c:
--------------------------
command line:	-residgain <percent>
description:	"reSID gain in percent (90 - 100)"
resource:		"SidResidGain"
action:		N/A

sid/sid-cmdline-options.c:
--------------------------
command line:	-residfilterbias <number>
description:	"reSID filter bias setting, which can be used to adjust DAC bias in millivolts."
resource:		"SidResidGain"
action:		N/A

sid/sid-cmdline-options.c:
--------------------------
command line:	-sidstereo <amount>
description:	"amount of extra SID chips"
resource:		"SidStereo"
action:		N/A

sid/sid-cmdline-options.c:
--------------------------
command line:	-sidstereoaddress <Base address>
description:	"Specify base address for 2nd SID"
resource:		"SidStereoAddressStart"
action:		N/A

sid/sid-cmdline-options.c:
--------------------------
command line:	-sidtripleaddress <Base address>
description:	"Specify base address for 3rd SID"
resource:		"SidTripleAddressStart"
action:		N/A

sid/sid-cmdline-options.c:
--------------------------
command line:	-sidfilters
description:	"Emulate SID filters"
resource:		"SidFilters" (set to 1)
action:		N/A

sid/sid-cmdline-options.c:
--------------------------
command line:	+sidfilters
description:	"Do not emulate SID filters"
resource:		"SidFilters" (set to 0)
action:		N/A

sound.c:
--------
command line:	-sound
description:	"Enable sound playback"
resource:		"Sound" (set to 1)
action:		N/A

sound.c:
--------
command line:	+sound
description:	"Disable sound playback"
resource:		"Sound" (set to 0)
action:		N/A

sound.c:
--------
command line:	-soundrate <value>
description:	"Set sound sample rate to <value> Hz"
resource:		"SoundSampleRate"
action:		N/A

sound.c:
--------
command line:	-soundbufsize <value>
description:	"Set sound buffer size to <value> msec"
resource:		"SoundBufferSize"
action:		N/A

sound.c:
--------
command line:	-soundfragsize <value>
description:	"Set sound fragment size (0 = small, 1 = medium, 2 = large)"
resource:		"SoundFragmentSize"
action:		N/A

sound.c:
--------
command line:	-sounddev <Name>
description:	"Specify sound driver" (fixme: needs better description)
resource:		"SoundDeviceName"
action:		N/A

sound.c:
--------
command line:	-soundarg <args>
description:	"Specify initialization parameters for sound driver" (fixme: needs better description)
resource:		"SoundDeviceArg"
action:		N/A

sound.c:
--------
command line:	-soundrecdev <Name>
description:	"Specify recording sound driver" (fixme: needs better description)
resource:		"SoundRecordDeviceName"
action:		N/A

sound.c:
--------
command line:	-soundrecarg <args>
description:	"Specify initialization parameters for recording sound driver" (fixme: needs better description)
resource:		"SoundRecordDeviceArg"
action:		N/A

sound.c:
--------
command line:	-soundsync <sync>
description:	"Set sound speed adjustment (0: flexible, 1: adjusting, 2: exact)"
resource:		"SoundSpeedAdjustment"
action:		N/A

sound.c:
--------
command line:	-soundoutput <output mode>
description:	"Sound output mode: (0: system decides mono/stereo, 1: always mono, 2: always stereo)"
resource:		"SoundOutput"
action:		N/A

sysfile.c:
----------
command line:	-directory <Path>
description:	"Define search path to locate system files"
resource:		"Directory"
action:		N/A

translate.c:
------------
command line:	-lang <iso language code>
description:	"Specify the iso code of the language" (fixme: needs better description)
resource:		"Language"
action:		N/A

traps.c:
--------
command line:	-virtualdev
description:	"Enable general mechanisms for fast disk/tape emulation"
resource:		"VirtualDevices" (set to 1)
action:		N/A

traps.c:
--------
command line:	+virtualdev
description:	"Disable general mechanisms for fast disk/tape emulation"
resource:		"VirtualDevices" (set to 0)
action:		N/A

userport/userport_dac.c:
------------------------
command line:	-userportdac
description:	"Enable Userport DAC for sound output"
resource:		"UserportDAC" (set to 1)
action:		N/A

userport/userport_dac.c:
------------------------
command line:	+userportdac
description:	"Disable Userport DAC for sound output"
resource:		"UserportDAC" (set to 0)
action:		N/A

userport/userport_joystick.c:
-----------------------------
command line:	-userportjoy
description:	"Enable Userport joystick adapter"
resource:		"UserportJoy" (set to 1)
action:		N/A

userport/userport_joystick.c:
-----------------------------
command line:	+userportjoy
description:	"Disable Userport joystick adapter"
resource:		"UserportJoy" (set to 0)
action:		N/A

userport/userport_joystick.c:
-----------------------------
command line:	-userportjoytype <Type>
description:	"Set Userport joystick adapter type (0: CGA/Protovision, 1: PET, 2: Hummer, 3: OEM, 4: DXS/HIT, 5: Kingsoft, 6: Starbyte)"
resource:		"UserportJoyType"
action:		N/A

userport/userport_rtc.c:
------------------------
command line:	-userportrtc
description:	"Enable Userport RTC"
resource:		"UserportRTC" (set to 1)
action:		N/A

userport/userport_rtc.c:
------------------------
command line:	+userportrtc
description:	"Disable Userport RTC"
resource:		"UserportRTC" (set to 0)
action:		N/A

vdc/vdc-cmdline-options.c:
--------------------------
command line:	-VDCstretchvertical
description:	"Enable additional vertical stretching."
resource:		"VDCStretchVertical" (set to 1)
action:		N/A

vdc/vdc-cmdline-options.c:
--------------------------
command line:	+VDCstretchvertical
description:	"Disable additional vertical stretching."
resource:		"VDCStretchVertical" (set to 0)
action:		N/A

vdc/vdc-cmdline-options.c:
--------------------------
command line:	-VDC16KB
description:	"Set the VDC memory size to 16KB"
resource:		"VDC64KB" (set to 0)
action:		N/A

vdc/vdc-cmdline-options.c:
--------------------------
command line:	-VDC64KB
description:	"Set the VDC memory size to 64KB"
resource:		"VDC64KB" (set to 1)
action:		N/A

vdc/vdc-cmdline-options.c:
--------------------------
command line:	-VDCRevision <number>
description:	"Set VDC revision (0..2)"
resource:		"VDCRevision"
action:		N/A

vdc/vdc-cmdline-options.c:
--------------------------
command line:	-VDCvcache
description:	"Enable the video cache"
resource:		"VDCVideoCache" (set to 1)
action:		N/A

vdc/vdc-cmdline-options.c:
--------------------------
command line:	+VDCvcache
description:	"Disable the video cache"
resource:		"VDCVideoCache" (set to 0)
action:		N/A

vdc/vdc-cmdline-options.c:
--------------------------
command line:	-VDCdsize
description:	"Enable double size"
resource:		"VDCDoubleSize" (set to 1)
action:		N/A

vdc/vdc-cmdline-options.c:
--------------------------
command line:	+VDCdsize
description:	"Disable double size"
resource:		"VDCDoubleSize" (set to 0)
action:		N/A

vdc/vdc-cmdline-options.c:
--------------------------
command line:	-VDCdscan
description:	"Enable double scan"
resource:		"VDCDoubleScan" (set to 1)
action:		N/A

vdc/vdc-cmdline-options.c:
--------------------------
command line:	+VDCdscan
description:	"Disable double scan"
resource:		"VDCDoubleScan" (set to 0)
action:		N/A

vdc/vdc-cmdline-options.c:
--------------------------
command line:	-VDCaudioleak
description:	"Enable audio leak emulation"
resource:		"VDCAudioLeak" (set to 1)
action:		N/A

vdc/vdc-cmdline-options.c:
--------------------------
command line:	+VDCaudioleak
description:	"Disable audio leak emulation"
resource:		"VDCAudioLeak" (set to 0)
action:		N/A

vdc/vdc-cmdline-options.c:
--------------------------
command line:	-VDChwscale
description:	"Enable hardware scaling"
resource:		"VDCHwScale" (set to 1)
action:		N/A

vdc/vdc-cmdline-options.c:
--------------------------
command line:	+VDChwscale
description:	"Disable hardware scaling"
resource:		"VDCHwScale" (set to 0)
action:		N/A

vdc/vdc-cmdline-options.c:
--------------------------
command line:	-VDCfilter <Mode>
description:	"Select rendering filter: (0: none, 1: CRT emulation, 2: scale2x)"
resource:		"VDCFilter"
action:		N/A

vdc/vdc-cmdline-options.c:
--------------------------
command line:	-VDCintpal
description:	"Use an internal calculated palette"
resource:		"VDCExternalPalette" (set to 0)
action:		N/A

vdc/vdc-cmdline-options.c:
--------------------------
command line:	-VDCextpal
description:	"Use an external palette (file)"
resource:		"VDCExternalPalette" (set to 1)
action:		N/A

vdc/vdc-cmdline-options.c:
--------------------------
command line:	-VDCpalette <Name>
description:	"Specify name of file of external palette"
resource:		"VDCPaletteFile"
action:		N/A

vdc/vdc-cmdline-options.c:
--------------------------
command line:	-VDCfull
description:	"Enable fullscreen"
resource:		"VDCFullscreen" (set to 1)
action:		N/A

vdc/vdc-cmdline-options.c:
--------------------------
command line:	+VDCfull
description:	"Disable fullscreen"
resource:		"VDCFullscreen" (set to 0)
action:		N/A

vdc/vdc-cmdline-options.c:
--------------------------
command line:	-VDCfulldevice <device>
description:	"Select fullscreen device"
resource:		"VDCFullscreenDevice"
action:		N/A

vdc/vdc-cmdline-options.c:
--------------------------
command line:	-VDCSDLfullmode <Mode>
description:	"Select fullscreen mode"
resource:		"VDCSDLFullscreenMode"
action:		N/A

vdc/vdc-cmdline-options.c:
--------------------------
command line:	-VDCXRANDRfullmode <Mode>
description:	"Select fullscreen mode"
resource:		"VDCXRANDRFullscreenMode"
action:		N/A

vdc/vdc-cmdline-options.c:
--------------------------
command line:	-VDCVidmodefullmode <Mode>
description:	"Select fullscreen mode"
resource:		"VDCVidmodeFullscreenMode"
action:		N/A

vdc/vdc-cmdline-options.c:
--------------------------
command line:	-VDCsaturation <0-2000>
description:	"Set saturation of internal calculated palette [1000]"
resource:		"VDCColorSaturation"
action:		N/A

vdc/vdc-cmdline-options.c:
--------------------------
command line:	-VDCcontrast <0-2000>
description:	"Set contrast of internal calculated palette [1000]"
resource:		"VDCColorContrast"
action:		N/A

vdc/vdc-cmdline-options.c:
--------------------------
command line:	-VDCbrightness <0-2000>
description:	"Set brightness of internal calculated palette [1000]"
resource:		"VDCColorBrightness"
action:		N/A

vdc/vdc-cmdline-options.c:
--------------------------
command line:	-VDCgamma <0-4000>
description:	"Set gamma of internal calculated palette [2200]"
resource:		"VDCColorGamma"
action:		N/A

vdc/vdc-cmdline-options.c:
--------------------------
command line:	-VDCtint <0-2000>
description:	"Set tint of internal calculated palette [1000]"
resource:		"VDCColorTint"
action:		N/A

vdc/vdc-cmdline-options.c:
--------------------------
command line:	-VDCoddlinesphase <0-2000>
description:	"Set phase for color carrier in odd lines [1250]"
resource:		"VDCPALOddLinePhase"
action:		N/A

vdc/vdc-cmdline-options.c:
--------------------------
command line:	-VDCoddlinesoffset <0-2000>
description:	"Set phase offset for color carrier in odd lines [750]"
resource:		"VDCPALOddLineOffset"
action:		N/A

vdc/vdc-cmdline-options.c:
--------------------------
command line:	-VDCcrtblur <0-1000>
description:	"Amount of horizontal blur for the CRT emulation. [500]"
resource:		"VDCPALBlur"
action:		N/A

vdc/vdc-cmdline-options.c:
--------------------------
command line:	-VDCcrtscanlineshade <0-1000>
description:	"Amount of scan line shading for the CRT emulation [667]"
resource:		"VDCPALScanLineShade"
action:		N/A

vic20/cart/finalexpansion.c:
----------------------------
command line:	-fewriteback
description:	"Enable Final Expansion write back to ROM file"
resource:		"FinalExpansionWriteBack" (set to 1)
action:		N/A

vic20/cart/finalexpansion.c:
----------------------------
command line:	+fewriteback
description:	"Disable Final Expansion write back to ROM file"
resource:		"FinalExpansionWriteBack" (set to 0)
action:		N/A

vic20/cart/megacart.c:
----------------------
command line:	-mcnvramfile <Name>
description:	"Set Mega-Cart NvRAM filename"
resource:		"MegaCartNvRAMfilename"
action:		N/A

vic20/cart/megacart.c:
----------------------
command line:	-mcnvramwriteback
description:	"Enable Mega-Cart NvRAM writeback"
resource:		"MegaCartNvRAMWriteBack" (set to 1)
action:		N/A

vic20/cart/megacart.c:
----------------------
command line:	+mcnvramwriteback
description:	"Disable Mega-Cart NvRAM writeback"
resource:		"MegaCartNvRAMWriteBack" (set to 0)
action:		N/A

vic20/cart/vic-fp.c:
--------------------
command line:	-fpwriteback
description:	"Enable Vic Flash Plugin write back to ROM file"
resource:		"VicFlashPluginWriteBack" (set to 1)
action:		N/A

vic20/cart/vic-fp.c:
--------------------
command line:	+fpwriteback
description:	"Disable Vic Flash Plugin write back to ROM file"
resource:		"VicFlashPluginWriteBack" (set to 0)
action:		N/A

vic20/cart/vic20-ieee488.c:
---------------------------
command line:	-ieee488
description:	"Enable VIC-1112 IEEE488 interface"
resource:		"IEEE488" (set to 1)
action:		N/A

vic20/cart/vic20-ieee488.c:
---------------------------
command line:	+ieee488
description:	"Disable VIC-1112 IEEE488 interface"
resource:		"IEEE488" (set to 0)
action:		N/A

vic20/cart/vic20-sidcart.c:
---------------------------
command line:	-sidcart
description:	"Enable the SID cartridge"
resource:		"SidCart" (set to 1)
action:		N/A

vic20/cart/vic20-sidcart.c:
---------------------------
command line:	+sidcart
description:	"Disable the SID cartridge"
resource:		"SidCart" (set to 0)
action:		N/A

vic20/cart/vic20cart.c:
-----------------------
command line:	-cartreset
description:	"Reset machine if a cartridge is attached or detached"
resource:		"CartridgeReset" (set to 1)
action:		N/A

vic20/cart/vic20cart.c:
-----------------------
command line:	+cartreset
description:	"Do not reset machine if a cartridge is attached or detached"
resource:		"CartridgeReset" (set to 0)
action:		N/A

vic20/cart/vic20cart.c:
-----------------------
command line:	-cart2 <Name>
description:	"Specify 4/8/16K extension ROM name at $2000"
resource:		N/A
action:		attach_cartridge_cmdline()

vic20/cart/vic20cart.c:
-----------------------
command line:	-cart4 <Name>
description:	"Specify 4/8/16K extension ROM name at $4000"
resource:		N/A
action:		attach_cartridge_cmdline()

vic20/cart/vic20cart.c:
-----------------------
command line:	-cart6 <Name>
description:	"Specify 4/8/16K extension ROM name at $6000"
resource:		N/A
action:		attach_cartridge_cmdline()

vic20/cart/vic20cart.c:
-----------------------
command line:	-cartA <Name>
description:	"Specify 4/8K extension ROM name at $A000"
resource:		N/A
action:		attach_cartridge_cmdline()

vic20/cart/vic20cart.c:
-----------------------
command line:	-cartB <Name>
description:	"Specify 4K extension ROM name at $B000"
resource:		N/A
action:		attach_cartridge_cmdline()

vic20/cart/vic20cart.c:
-----------------------
command line:	-cartgeneric <Name>
description:	"Specify generic extension ROM name"
resource:		N/A
action:		attach_cartridge_cmdline()

vic20/cart/vic20cart.c:
-----------------------
command line:	-cartmega <Name>
description:	"Specify Mega-Cart extension ROM name"
resource:		N/A
action:		attach_cartridge_cmdline()

vic20/cart/vic20cart.c:
-----------------------
command line:	-cartfe <Name>
description:	"Specify Final Expansion extension ROM name"
resource:		N/A
action:		attach_cartridge_cmdline()

vic20/cart/vic20cart.c:
-----------------------
command line:	-cartfp <Name>
description:	"Specify Vic Flash Plugin extension ROM name"
resource:		N/A
action:		attach_cartridge_cmdline()

vic20/cart/vic20cart.c:
-----------------------
command line:	+cart
description:	"Disable default cartridge"
resource:		N/A
action:		detach_cartridge_cmdline()

vic20/vic-cmdline-options.c:
----------------------------
command line:	-VICborders <Mode>
description:	"Set VIC-II border display mode (0: normal, 1: full, 2: debug)" (fixme: wrong description)
resource:		"VICBorderMode"
action:		N/A

vic20/vic-cmdline-options.c:
----------------------------
command line:	-VICvcache
description:	"Enable the video cache"
resource:		"VICVideoCache" (set to 1)
action:		N/A

vic20/vic-cmdline-options.c:
----------------------------
command line:	+VICvcache
description:	"Disable the video cache"
resource:		"VICVideoCache" (set to 0)
action:		N/A

vic20/vic-cmdline-options.c:
----------------------------
command line:	-VICdsize
description:	"Enable double size"
resource:		"VICDoubleSize" (set to 1)
action:		N/A

vic20/vic-cmdline-options.c:
----------------------------
command line:	+VICdsize
description:	"Disable double size"
resource:		"VICDoubleSize" (set to 0)
action:		N/A

vic20/vic-cmdline-options.c:
----------------------------
command line:	-VICdscan
description:	"Enable double scan"
resource:		"VICDoubleScan" (set to 1)
action:		N/A

vic20/vic-cmdline-options.c:
----------------------------
command line:	+VICdscan
description:	"Disable double scan"
resource:		"VICDoubleScan" (set to 0)
action:		N/A

vic20/vic-cmdline-options.c:
----------------------------
command line:	-VICaudioleak
description:	"Enable audio leak emulation"
resource:		"VICAudioLeak" (set to 1)
action:		N/A

vic20/vic-cmdline-options.c:
----------------------------
command line:	+VICaudioleak
description:	"Disable audio leak emulation"
resource:		"VICAudioLeak" (set to 0)
action:		N/A

vic20/vic-cmdline-options.c:
----------------------------
command line:	-VIChwscale
description:	"Enable hardware scaling"
resource:		"VICHwScale" (set to 1)
action:		N/A

vic20/vic-cmdline-options.c:
----------------------------
command line:	+VIChwscale
description:	"Disable hardware scaling"
resource:		"VICHwScale" (set to 0)
action:		N/A

vic20/vic-cmdline-options.c:
----------------------------
command line:	-VICfilter <Mode>
description:	"Select rendering filter: (0: none, 1: CRT emulation, 2: scale2x)"
resource:		"VICFilter"
action:		N/A

vic20/vic-cmdline-options.c:
----------------------------
command line:	-VICintpal
description:	"Use an internal calculated palette"
resource:		"VICExternalPalette" (set to 0)
action:		N/A

vic20/vic-cmdline-options.c:
----------------------------
command line:	-VICextpal
description:	"Use an external palette (file)"
resource:		"VICExternalPalette" (set to 1)
action:		N/A

vic20/vic-cmdline-options.c:
----------------------------
command line:	-VICpalette <Name>
description:	"Specify name of file of external palette"
resource:		"VICPaletteFile"
action:		N/A

vic20/vic-cmdline-options.c:
----------------------------
command line:	-VICfull
description:	"Enable fullscreen"
resource:		"VICFullscreen" (set to 1)
action:		N/A

vic20/vic-cmdline-options.c:
----------------------------
command line:	+VICfull
description:	"Disable fullscreen"
resource:		"VICFullscreen" (set to 0)
action:		N/A

vic20/vic-cmdline-options.c:
----------------------------
command line:	-VICfulldevice <device>
description:	"Select fullscreen device"
resource:		"VICFullscreenDevice"
action:		N/A

vic20/vic-cmdline-options.c:
----------------------------
command line:	-VICSDLfullmode <Mode>
description:	"Select fullscreen mode"
resource:		"VICSDLFullscreenMode"
action:		N/A

vic20/vic-cmdline-options.c:
----------------------------
command line:	-VICXRANDRfullmode <Mode>
description:	"Select fullscreen mode"
resource:		"VICXRANDRFullscreenMode"
action:		N/A

vic20/vic-cmdline-options.c:
----------------------------
command line:	-VICVidmodefullmode <Mode>
description:	"Select fullscreen mode"
resource:		"VICVidmodeFullscreenMode"
action:		N/A

vic20/vic-cmdline-options.c:
----------------------------
command line:	-VICsaturation <0-2000>
description:	"Set saturation of internal calculated palette [1000]"
resource:		"VICColorSaturation"
action:		N/A

vic20/vic-cmdline-options.c:
----------------------------
command line:	-VICcontrast <0-2000>
description:	"Set contrast of internal calculated palette [1000]"
resource:		"VICColorContrast"
action:		N/A

vic20/vic-cmdline-options.c:
----------------------------
command line:	-VICbrightness <0-2000>
description:	"Set brightness of internal calculated palette [1000]"
resource:		"VICColorBrightness"
action:		N/A

vic20/vic-cmdline-options.c:
----------------------------
command line:	-VICgamma <0-4000>
description:	"Set gamma of internal calculated palette [2200]"
resource:		"VICColorGamma"
action:		N/A

vic20/vic-cmdline-options.c:
----------------------------
command line:	-VICtint <0-2000>
description:	"Set tint of internal calculated palette [1000]"
resource:		"VICColorTint"
action:		N/A

vic20/vic-cmdline-options.c:
----------------------------
command line:	-VICoddlinesphase <0-2000>
description:	"Set phase for color carrier in odd lines [1250]"
resource:		"VICPALOddLinePhase"
action:		N/A

vic20/vic-cmdline-options.c:
----------------------------
command line:	-VICoddlinesoffset <0-2000>
description:	"Set phase offset for color carrier in odd lines [750]"
resource:		"VICPALOddLineOffset"
action:		N/A

vic20/vic-cmdline-options.c:
----------------------------
command line:	-VICcrtblur <0-1000>
description:	"Amount of horizontal blur for the CRT emulation. [500]"
resource:		"VICPALBlur"
action:		N/A

vic20/vic-cmdline-options.c:
----------------------------
command line:	-VICcrtscanlineshade <0-1000>
description:	"Amount of scan line shading for the CRT emulation [667]"
resource:		"VICPALScanLineShade"
action:		N/A

vic20/vic20-cmdline-options.c:
------------------------------
command line:	-pal
description:	"Use PAL sync factor"
resource:		"MachineVideoStandard" (set to MACHINE_SYNC_PAL)
action:		N/A

vic20/vic20-cmdline-options.c:
------------------------------
command line:	-ntsc
description:	"Use NTSC sync factor"
resource:		"MachineVideoStandard" (set to MACHINE_SYNC_NSTC)
action:		N/A

vic20/vic20-cmdline-options.c:
------------------------------
command line:	-kernal <Name>
description:	"Specify name of Kernal ROM image"
resource:		"KernalName"
action:		N/A

vic20/vic20-cmdline-options.c:
------------------------------
command line:	-basic <Name>
description:	"Specify name of BASIC ROM image"
resource:		"BasicName"
action:		N/A

vic20/vic20-cmdline-options.c:
------------------------------
command line:	-chargen <Name>
description:	"Specify name of character generator ROM image"
resource:		"ChargenName"
action:		N/A

vic20/vic20-cmdline-options.c:
------------------------------
command line:	-memory <spec>
description:	"Specify memory configuration" (fixme: needs better description)
resource:		N/A
action:		cmdline_memory() (sets "RAMBlock0", "RAMBlock1", "RAMBlock2", "RAMBlock3" and "RAMBlock5")

vic20/vic20-cmdline-options.c:
------------------------------
command line:	-keymap <number>
description:	"Specify index of keymap file (0=symbol, 1=positional)"
resource:		"KeymapIndex"
action:		N/A

vic20/vic20-cmdline-options.c:
------------------------------
command line:	-symkeymap <Name>
description:	"Specify name of symbolic keymap file"
resource:		"KeymapSymFile"
action:		N/A

vic20/vic20-cmdline-options.c:
------------------------------
command line:	-poskeymap <Name>
description:	"Specify name of positional keymap file"
resource:		"KeymapPosFile"
action:		N/A

vic20/vic20-cmdline-options.c:
------------------------------
command line:	-model <Model>
description:	"Set VIC20 model (vic20/vic20pal/vic20ntsc, vic21)"
resource:		N/A
action:		set_vic20_model() (sets "MachineVideoStandard", "RamBlock0", "RamBlock1", "RamBlock2", "RamBlock3" and "RamBlock5")

vic20/vic20io.c:
----------------
command line:	-iocollision <method>
description:	"Select the way the I/O collisions should be handled, (0: error message and detach all involved carts, 1: error message and detach last attached involved carts, 2: warning in log and 'AND' the valid return values"
resource:		"IOCollisionHandling"
action:		N/A

vicii/vicii-cmdline-options.c:
------------------------------
command line:	-VICIIborders <Mode>
description:	"Set VIC-II border display mode (0: normal, 1: full, 2: debug)"
resource:		N/A
action:		border_set_func() 

vicii/vicii-cmdline-options.c:
------------------------------
command line:	-VICIIchecksb
description:	"Enable sprite-background collision registers"
resource:		"VICIICheckSbColl" (set to 1)
action:		N/A

vicii/vicii-cmdline-options.c:
------------------------------
command line:	+VICIIchecksb
description:	"Disable sprite-background collision registers"
resource:		"VICIICheckSbColl" (set to 0)
action:		N/A

vicii/vicii-cmdline-options.c:
------------------------------
command line:	-VICIIcheckss
description:	"Enable sprite-sprite collision registers"
resource:		"VICIICheckSsColl" (set to 1)
action:		N/A

vicii/vicii-cmdline-options.c:
------------------------------
command line:	+VICIIcheckss
description:	"Disable sprite-sprite collision registers"
resource:		"VICIICheckSsColl" (set to 0)
action:		N/A

vicii/vicii-cmdline-options.c:
------------------------------
command line:	-VICIInewluminance
description:	"Use new luminances"
resource:		"VICIINewLuminances" (set to 1)
action:		N/A

vicii/vicii-cmdline-options.c:
------------------------------
command line:	+VICIInewluminance
description:	"Use old luminances"
resource:		"VICIINewLuminances" (set to 0)
action:		N/A

vicii/vicii-cmdline-options.c:
------------------------------
command line:	-VICIIvcache
description:	"Enable the video cache"
resource:		"VICIIVideoCache" (set to 1)
action:		N/A

vicii/vicii-cmdline-options.c:
------------------------------
command line:	+VICIIvcache
description:	"Disable the video cache"
resource:		"VICIIVideoCache" (set to 0)
action:		N/A

vicii/vicii-cmdline-options.c:
------------------------------
command line:	-VICIIdsize
description:	"Enable double size"
resource:		"VICIIDoubleSize" (set to 1)
action:		N/A

vicii/vicii-cmdline-options.c:
------------------------------
command line:	+VICIIdsize
description:	"Disable double size"
resource:		"VICIIDoubleSize" (set to 0)
action:		N/A

vicii/vicii-cmdline-options.c:
------------------------------
command line:	-VICIIdscan
description:	"Enable double scan"
resource:		"VICIIDoubleScan" (set to 1)
action:		N/A

vicii/vicii-cmdline-options.c:
------------------------------
command line:	+VICIIdscan
description:	"Disable double scan"
resource:		"VICIIDoubleScan" (set to 0)
action:		N/A

vicii/vicii-cmdline-options.c:
------------------------------
command line:	-VICIIaudioleak
description:	"Enable audio leak emulation"
resource:		"VICIIAudioLeak" (set to 1)
action:		N/A

vicii/vicii-cmdline-options.c:
------------------------------
command line:	+VICIIaudioleak
description:	"Disable audio leak emulation"
resource:		"VICIIAudioLeak" (set to 0)
action:		N/A

vicii/vicii-cmdline-options.c:
------------------------------
command line:	-VICIIhwscale
description:	"Enable hardware scaling"
resource:		"VICIIHwScale" (set to 1)
action:		N/A

vicii/vicii-cmdline-options.c:
------------------------------
command line:	+VICIIhwscale
description:	"Disable hardware scaling"
resource:		"VICIIHwScale" (set to 0)
action:		N/A

vicii/vicii-cmdline-options.c:
------------------------------
command line:	-VICIIfilter <Mode>
description:	"Select rendering filter: (0: none, 1: CRT emulation, 2: scale2x)"
resource:		"VICIIFilter"
action:		N/A

vicii/vicii-cmdline-options.c:
------------------------------
command line:	-VICIIintpal
description:	"Use an internal calculated palette"
resource:		"VICIIExternalPalette" (set to 0)
action:		N/A

vicii/vicii-cmdline-options.c:
------------------------------
command line:	-VICIIextpal
description:	"Use an external palette (file)"
resource:		"VICIIExternalPalette" (set to 1)
action:		N/A

vicii/vicii-cmdline-options.c:
------------------------------
command line:	-VICIIpalette <Name>
description:	"Specify name of file of external palette"
resource:		"VICIIPaletteFile"
action:		N/A

vicii/vicii-cmdline-options.c:
------------------------------
command line:	-VICIIfull
description:	"Enable fullscreen"
resource:		"VICIIFullscreen" (set to 1)
action:		N/A

vicii/vicii-cmdline-options.c:
------------------------------
command line:	+VICIIfull
description:	"Disable fullscreen"
resource:		"VICIIFullscreen" (set to 0)
action:		N/A

vicii/vicii-cmdline-options.c:
------------------------------
command line:	-VICIIfulldevice <device>
description:	"Select fullscreen device"
resource:		"VICIIFullscreenDevice"
action:		N/A

vicii/vicii-cmdline-options.c:
------------------------------
command line:	-VICIISDLfullmode <Mode>
description:	"Select fullscreen mode"
resource:		"VICIISDLFullscreenMode"
action:		N/A

vicii/vicii-cmdline-options.c:
------------------------------
command line:	-VICIIXRANDRfullmode <Mode>
description:	"Select fullscreen mode"
resource:		"VICIIXRANDRFullscreenMode"
action:		N/A

vicii/vicii-cmdline-options.c:
------------------------------
command line:	-VICIIVidmodefullmode <Mode>
description:	"Select fullscreen mode"
resource:		"VICIIVidmodeFullscreenMode"
action:		N/A

vicii/vicii-cmdline-options.c:
------------------------------
command line:	-VICIIsaturation <0-2000>
description:	"Set saturation of internal calculated palette [1000]"
resource:		"VICIIColorSaturation"
action:		N/A

vicii/vicii-cmdline-options.c:
------------------------------
command line:	-VICIIcontrast <0-2000>
description:	"Set contrast of internal calculated palette [1000]"
resource:		"VICIIColorContrast"
action:		N/A

vicii/vicii-cmdline-options.c:
------------------------------
command line:	-VICIIbrightness <0-2000>
description:	"Set brightness of internal calculated palette [1000]"
resource:		"VICIIColorBrightness"
action:		N/A

vicii/vicii-cmdline-options.c:
------------------------------
command line:	-VICIIgamma <0-4000>
description:	"Set gamma of internal calculated palette [2200]"
resource:		"VICIIColorGamma"
action:		N/A

vicii/vicii-cmdline-options.c:
------------------------------
command line:	-VICIItint <0-2000>
description:	"Set tint of internal calculated palette [1000]"
resource:		"VICIIColorTint"
action:		N/A

vicii/vicii-cmdline-options.c:
------------------------------
command line:	-VICIIoddlinesphase <0-2000>
description:	"Set phase for color carrier in odd lines [1250]"
resource:		"VICIIPALOddLinePhase"
action:		N/A

vicii/vicii-cmdline-options.c:
------------------------------
command line:	-VICIIoddlinesoffset <0-2000>
description:	"Set phase offset for color carrier in odd lines [750]"
resource:		"VICIIPALOddLineOffset"
action:		N/A

vicii/vicii-cmdline-options.c:
------------------------------
command line:	-VICIIcrtblur <0-1000>
description:	"Amount of horizontal blur for the CRT emulation. [500]"
resource:		"VICIIPALBlur"
action:		N/A

vicii/vicii-cmdline-options.c:
------------------------------
command line:	-VICIIcrtscanlineshade <0-1000>
description:	"Amount of scan line shading for the CRT emulation [667]"
resource:		"VICIIPALScanLineShade"
action:		N/A

viciisc/vicii-cmdline-options.c:
--------------------------------
command line:	-VICIIborders <Mode>
description:	"Set VIC-II border display mode (0: normal, 1: full, 2: debug)"
resource:		N/A
action:		border_set_func() 

viciisc/vicii-cmdline-options.c:
--------------------------------
command line:	-VICIIchecksb
description:	"Enable sprite-background collision registers"
resource:		"VICIICheckSbColl" (set to 1)
action:		N/A

viciisc/vicii-cmdline-options.c:
--------------------------------
command line:	+VICIIchecksb
description:	"Disable sprite-background collision registers"
resource:		"VICIICheckSbColl" (set to 0)
action:		N/A

viciisc/vicii-cmdline-options.c:
--------------------------------
command line:	-VICIIcheckss
description:	"Enable sprite-sprite collision registers"
resource:		"VICIICheckSsColl" (set to 1)
action:		N/A

viciisc/vicii-cmdline-options.c:
--------------------------------
command line:	+VICIIcheckss
description:	"Disable sprite-sprite collision registers"
resource:		"VICIICheckSsColl" (set to 0)
action:		N/A

viciisc/vicii-cmdline-options.c:
--------------------------------
command line:	-VICIInewluminance
description:	"Use new luminances"
resource:		"VICIINewLuminances" (set to 1)
action:		N/A

viciisc/vicii-cmdline-options.c:
--------------------------------
command line:	+VICIInewluminance
description:	"Use old luminances"
resource:		"VICIINewLuminances" (set to 0)
action:		N/A

viciisc/vicii-cmdline-options.c:
--------------------------------
command line:	-VICIImodel <Model>
description:	"Set VIC-II model (6569/6569r1/8565/6567/8562/6567r56a)"
resource:		N/A
action:		set_vicii_model() (sets "VICIIModel")

viciisc/vicii-cmdline-options.c:
--------------------------------
command line:	-VICIIvcache
description:	"Enable the video cache"
resource:		"VICIIVideoCache" (set to 1)
action:		N/A

viciisc/vicii-cmdline-options.c:
--------------------------------
command line:	+VICIIvcache
description:	"Disable the video cache"
resource:		"VICIIVideoCache" (set to 0)
action:		N/A

viciisc/vicii-cmdline-options.c:
--------------------------------
command line:	-VICIIdsize
description:	"Enable double size"
resource:		"VICIIDoubleSize" (set to 1)
action:		N/A

viciisc/vicii-cmdline-options.c:
--------------------------------
command line:	+VICIIdsize
description:	"Disable double size"
resource:		"VICIIDoubleSize" (set to 0)
action:		N/A

viciisc/vicii-cmdline-options.c:
--------------------------------
command line:	-VICIIdscan
description:	"Enable double scan"
resource:		"VICIIDoubleScan" (set to 1)
action:		N/A

viciisc/vicii-cmdline-options.c:
--------------------------------
command line:	+VICIIdscan
description:	"Disable double scan"
resource:		"VICIIDoubleScan" (set to 0)
action:		N/A

viciisc/vicii-cmdline-options.c:
--------------------------------
command line:	-VICIIaudioleak
description:	"Enable audio leak emulation"
resource:		"VICIIAudioLeak" (set to 1)
action:		N/A

viciisc/vicii-cmdline-options.c:
--------------------------------
command line:	+VICIIaudioleak
description:	"Disable audio leak emulation"
resource:		"VICIIAudioLeak" (set to 0)
action:		N/A

viciisc/vicii-cmdline-options.c:
--------------------------------
command line:	-VICIIhwscale
description:	"Enable hardware scaling"
resource:		"VICIIHwScale" (set to 1)
action:		N/A

viciisc/vicii-cmdline-options.c:
--------------------------------
command line:	+VICIIhwscale
description:	"Disable hardware scaling"
resource:		"VICIIHwScale" (set to 0)
action:		N/A

viciisc/vicii-cmdline-options.c:
--------------------------------
command line:	-VICIIfilter <Mode>
description:	"Select rendering filter: (0: none, 1: CRT emulation, 2: scale2x)"
resource:		"VICIIFilter"
action:		N/A

viciisc/vicii-cmdline-options.c:
--------------------------------
command line:	-VICIIintpal
description:	"Use an internal calculated palette"
resource:		"VICIIExternalPalette" (set to 0)
action:		N/A

viciisc/vicii-cmdline-options.c:
--------------------------------
command line:	-VICIIextpal
description:	"Use an external palette (file)"
resource:		"VICIIExternalPalette" (set to 1)
action:		N/A

viciisc/vicii-cmdline-options.c:
--------------------------------
command line:	-VICIIpalette <Name>
description:	"Specify name of file of external palette"
resource:		"VICIIPaletteFile"
action:		N/A

viciisc/vicii-cmdline-options.c:
--------------------------------
command line:	-VICIIfull
description:	"Enable fullscreen"
resource:		"VICIIFullscreen" (set to 1)
action:		N/A

viciisc/vicii-cmdline-options.c:
--------------------------------
command line:	+VICIIfull
description:	"Disable fullscreen"
resource:		"VICIIFullscreen" (set to 0)
action:		N/A

viciisc/vicii-cmdline-options.c:
--------------------------------
command line:	-VICIIfulldevice <device>
description:	"Select fullscreen device"
resource:		"VICIIFullscreenDevice"
action:		N/A

viciisc/vicii-cmdline-options.c:
--------------------------------
command line:	-VICIISDLfullmode <Mode>
description:	"Select fullscreen mode"
resource:		"VICIISDLFullscreenMode"
action:		N/A

viciisc/vicii-cmdline-options.c:
--------------------------------
command line:	-VICIIXRANDRfullmode <Mode>
description:	"Select fullscreen mode"
resource:		"VICIIXRANDRFullscreenMode"
action:		N/A

viciisc/vicii-cmdline-options.c:
--------------------------------
command line:	-VICIIVidmodefullmode <Mode>
description:	"Select fullscreen mode"
resource:		"VICIIVidmodeFullscreenMode"
action:		N/A

viciisc/vicii-cmdline-options.c:
--------------------------------
command line:	-VICIIsaturation <0-2000>
description:	"Set saturation of internal calculated palette [1000]"
resource:		"VICIIColorSaturation"
action:		N/A

viciisc/vicii-cmdline-options.c:
--------------------------------
command line:	-VICIIcontrast <0-2000>
description:	"Set contrast of internal calculated palette [1000]"
resource:		"VICIIColorContrast"
action:		N/A

viciisc/vicii-cmdline-options.c:
--------------------------------
command line:	-VICIIbrightness <0-2000>
description:	"Set brightness of internal calculated palette [1000]"
resource:		"VICIIColorBrightness"
action:		N/A

viciisc/vicii-cmdline-options.c:
--------------------------------
command line:	-VICIIgamma <0-4000>
description:	"Set gamma of internal calculated palette [2200]"
resource:		"VICIIColorGamma"
action:		N/A

viciisc/vicii-cmdline-options.c:
--------------------------------
command line:	-VICIItint <0-2000>
description:	"Set tint of internal calculated palette [1000]"
resource:		"VICIIColorTint"
action:		N/A

viciisc/vicii-cmdline-options.c:
--------------------------------
command line:	-VICIIoddlinesphase <0-2000>
description:	"Set phase for color carrier in odd lines [1250]"
resource:		"VICIIPALOddLinePhase"
action:		N/A

viciisc/vicii-cmdline-options.c:
--------------------------------
command line:	-VICIIoddlinesoffset <0-2000>
description:	"Set phase offset for color carrier in odd lines [750]"
resource:		"VICIIPALOddLineOffset"
action:		N/A

viciisc/vicii-cmdline-options.c:
--------------------------------
command line:	-VICIIcrtblur <0-1000>
description:	"Amount of horizontal blur for the CRT emulation. [500]"
resource:		"VICIIPALBlur"
action:		N/A

viciisc/vicii-cmdline-options.c:
--------------------------------
command line:	-VICIIcrtscanlineshade <0-1000>
description:	"Amount of scan line shading for the CRT emulation [667]"
resource:		"VICIIPALScanLineShade"
action:		N/A

vsync.c:
--------
command line:	-speed <percent>
description:	"Limit emulation speed to specified value"
resource:		"Speed"
action:		N/A

vsync.c:
--------
command line:	-refresh <value>
description:	"Update every <value> frames (`0' for automatic)"
resource:		"RefreshRate"
action:		N/A

vsync.c:
--------
command line:	-warp
description:	"Enable warp mode"
resource:		"WarpMode" (set to 1)
action:		N/A

vsync.c:
--------
command line:	+warp
description:	"Disable warp mode"
resource:		"WarpMode" (set to 0)
action:		N/A